71 research outputs found

    Plastic optical fibre sensor for spine bending monitoring

    Get PDF
    peer-reviewedThis paper presents a study on the application of plastic optical fibre for spine bending monitoring based on an intensity modulation. The bending angle is measured as the angle between the emitting and receiving fibres is changed. The measured light attenuation is compared with a theoretical evaluation and the differences between these values are discussed. It was found that the light attenuation for the light intensity agreed well (margin of error < 15%) with the theoretical value for the range between 180o (representing no bend) and 200o and it was significantly increased for the bending angle beyond that value due to the effect of fibre gap increment which resulted in a less reliable experimental estimation.PUBLISHEDpeer-reviewe

    Stormwater characterisation and modelling for Sungai Air Hitam in Selangor, Malaysia using model for urban stormwater improvement conceptualisation (music)

    Get PDF
    The aim of this study is to evaluate the current water quality status of one of the urban rivers in Malaysia, called Sungai Air Hitam. The river's water supply is not only unsuitable for the inhabitants but also hazardous to the aquatic species that depend on it. In order to simulate the water quality formulation of the river, the Model for Urban Stormwater Improvement Conceptualization (MUSIC) was used. The effects of various best management practices (BMPs) components have been examined to improve the river's water quality. This study also investigated different scenarios of the expected future changes in the land cover and the quality of the river. As the proportion of impervious surfaces increases, the urban hydrology cycle can be significantly altered, resulting in an increase in volumes and peak flows, and a decrease in storage, infiltration, and interception. The MUSIC results have shown significant reductions in biochemical oxygen demand (BOD), total suspended solids (TSS), total phosphorus (TP), and total nitrogen (TN) after introducing BMPs. It was also noticed that the prediction of pollutants falls within the acceptable range set by the Urban Stormwater Management Manual for Malaysia (MSMA) 2nd edition. For the land cover, it was found that the total reduction of BOD, TSS, TP, and TN for existing land use is 92.5 %, 94.5 %, 90.7 % and 91.9 %. Meanwhile, the total reduction in future land use is 81.6 % for BOD, 86.2 % for TSS, 80.9 % for TP and 80.8 % for TN. From the simulation results, it was observed that the application of BMPs has successfully reduced the observed mean BOD concentration from 92.38 mg/L (Class V) to 6.93 mg/L (Class IV) of the national water quality standards, NWQS, water quality index. As a result, the water quality index of the overall catchment has improved from Class IV to Class III (WQ1, WQ3, and WQ4) and from Class V to IV (WQ2) with the application of the BMPs. This assessment aims to raise awareness within the Sungai Air Hitam community regarding the importance of preserving river cleanliness and understanding the long-term environmental impact of water quality. These findings underscore the importance of an integrated system in managing urban water systems, which can offer valuable insight to the decision-makers

    The future of Malay–Chinese relations in Malaysia

    Get PDF
    In this chapter, the Malay–Chinese relation is examined by considering the history and nature of the relationship, the ensuing intergroup conflict, and the steps taken by the government and civil society groups to address the conflict. Finally, a psychocultural approach to building peace between the two groups is proposed

    The DREEM, part 1: measurement of the educational environment in an osteopathy teaching program

    Get PDF
    Background Measurement of the educational environment has become more common in health professional education programs. Information gained from these investigations can be used to implement and measure changes to the curricula, educational delivery and the physical environment. A number of questionnaires exist to measure the educational environment, and the most commonly utilised of these is the Dundee Ready Educational Environment Measure (DREEM). Methods The DREEM was administered to students in all year levels of the osteopathy program at Victoria University (VU), Melbourne, Australia. Students also completed a demographic survey. Inferential and correlational statistics were employed to investigate the educational environment based on the scores obtained from the DREEM. Results A response rate of 90% was achieved. The mean total DREEM score was 135.37 (+/- 19.33) with the scores ranging from 72 to 179. Some subscales and items demonstrated differences for gender, clinical phase, age and whether the student was in receipt of a government allowance. Conclusions There are a number of areas in the program that are performing well, and some aspects that could be improved. Overall students rated the VU osteopathy program as more positive than negative. The information obtained in the present study has identified areas for improvement and will enable the program leaders to facilitate changes. It will also provide other educational institutions with data on which they can make comparisons with their own programs

    Effects of staggered array of cubical obstacles on near-ground wind environment and air quality

    No full text
    Deterioration of natural ventilation in outdoor environments due to rapid urbanisation has raised the issues pertaining to pedestrians' thermal comforts and pollutant exposures. There are substantial interests in the recent years to get an insight on how deficient these situations are and later propose the appropriate urban layout for optimum wind ventilation in a dense urban area. The objective of this paper is to numerically study the effects of urban layouts (i.e., staggered arrangements and cubes' densities) on wind ventilation and air quality near the ground subjected to one wind direction; perpendicular to the disposition direction. Computational fluid dynamics simulations were carried out by the use of standard k-ε turbulence model and found to be in fair agreement against the experimental data. Our result showed that loosely packed cubes exhibited lower pollutant concentration and higher wind speed near the ground compared to medium and densely packed cubes. Air quality was improved in closely packed cubes with staggered layout but did not show any improvement in medium and loosely packed cubes with staggered layout. Adversely, disposition of cubes exhibited lower wind speed compared to regular cubes for all street gap sizes. This paper also illustrates a practical strategy in optimising building layouts for wind flow enhancement and air quality improvement in an idealised urban area

    An experimental study on surface discharge characteristics of different types of polymeric material under AC voltage

    No full text
    Surface discharge is a common electrical discharge that normally occurs on the surface of outdoor insulators and also causes the failure in the electrical insulation system. One of the causes of surface discharge is the presence of high voltage stress. Experimental works had been carried out to examine the surface discharge characteristics on polymeric samples as insulation material. The IEC (b) electrode configuration had been used to investigate the surface discharges phenomena of different types of polymeric materials with controlled of air relative humidity (RH). In these experimental works, three types of polymeric sample were selected, namely high-density polyethylene (HDPE), ethylene-vinyl acetate (EVA), and polystyrene (PS), respectively. The characteristics of the discharge are critically depending on the types of polymer. Surface discharges intensity, number of discharge occurrence, and surface morphology of each polymeric material were also investigated. Comparisons of these electrical characteristics were conducted among the samples. Results from the experiment showed that the EVA samples experienced severe degradation as compared to HDPE and PS samples
    corecore