349 research outputs found
Long sandwich modules for photon veto detectors
Long lead-scintillator sandwich modules developed for the BNL experiment
KOPIO are described. The individual 4 m long module consists of 15 layers of 7
mm thick extruded scintillator and 15 layers of 1 mm lead absorber. Readout is
implemented via WLS fibers glued into grooves in a scintillator with 7 mm
spacing and viewed from both ends by the phototubes. Time resolution of 300 ps
for cosmic MIPs was obtained. Light output stability monitored for 2 years
shows no degradation beyond the measurement errors. A 4 m long C-bent sandwich
module was also manufactured and tested.Comment: 14 pages, 13 figures, 1 tabl
Scintillator counters with WLS fiber/MPPC readout for the side muon range detector (SMRD)of the T2K experiment
The T2K neutrino experiment at J-PARC uses a set of near detectors to measure
the properties of an unoscillated neutrino beam and neutrino interaction
cross-sections. One of the sub-detectors of the near-detector complex, the side
muon range detector (SMRD), is described in the paper. The detector is designed
to help measure the neutrino energy spectrum, to identify background and to
calibrate the other detectors. The active elements of the SMRD consist of 0.7
cm thick extruded scintillator slabs inserted into air gaps of the UA1 magnet
yokes. The readout of each scintillator slab is provided through a single WLS
fiber embedded into a serpentine shaped groove. Two Hamamatsu multi-pixel
avalanche photodiodes (MPPC's) are coupled to both ends of the WLS fiber. This
design allows us to achieve a high MIP detection efficiency of greater than
99%. A light yield of 25-50 p.e./MIP, a time resolution of about 1 ns and a
spatial resolution along the slab better than 10 cm were obtained for the SMRD
counters.Comment: 7 pages, 4 figures; talk at TIPP09, March 12-17, Tsukuba, Japan; to
be published in the conference proceeding
Test of exotic scalar and tensor interactions in K_e3 decay using stopped positive kaons
The form factors of the decay K+ --> pi0 e+ nu (K_e3) have been determined
from the comparison of the experimental and Monte Carlo Dalitz distributions
containing about 10^5 K_e3 events. The following values of the parameters were
obtained: lambda_+ = 0.0278 +- 0.0017(stat) +- 0.0015(syst), f_S/f_+(0) =
0.0040 +- 0.0160(stat) +- 0.0067(syst) and f_T/f_+(0) = 0.019 +- 0.080(stat) +-
0.038(syst). Both scalar f_S and tensor f_T form factors are consistent with
the Standard Model predictions of zero values.Comment: 10 pages, 5 figures, contributed to the proceedings of NANP
Conference, Dubna, June 19-23, 200
Improved Measurement of the K+ to pi+ nu nubar Branching Ratio
An additional event near the upper kinematic limit for K+ to pi+ nu nubar has
been observed by Experiment E949 at Brookhaven National Laboratory. Combining
previously reported and new data, the branching ratio is B(K+ to pi+ nu nubar)=
1.47 (+1.30, - 0.89) x 10-10 based on three events observed in the pion
momentum region 211<P<229 MeV/c. At the measured central value of the branching
ratio, the additional event had a signal-to-background ratio of 0.9
- …