Long sandwich modules for photon veto detectors

Long lead-scintillator sandwich modules developed for the BNL experiment KOPIO are described. The individual 4 m long module consists of 15 layers of 7 mm thick extruded scintillator and 15 layers of 1 mm lead absorber. Readout is implemented via WLS fibers glued into grooves in a scintillator with 7 mm spacing and viewed from both ends by the phototubes. Time resolution of 300 ps for cosmic MIPs was obtained. Light output stability monitored for 2 years shows no degradation beyond the measurement errors. A 4 m long C-bent sandwich module was also manufactured and tested.Comment: 14 pages, 13 figures, 1 tabl

Pinning down the kaon form factors in K^+ -> mu^+ nu_mu gamma decay

We find that the normal muon polarization in the decay K->mu nu_mu gamma is very sensitive to the values of the kaon vector F_V and axial-vector F_A form factors. It is shown that the ongoing KEK-E246 experiment can definitely determine the signs of the sum of the form factors if their difference is fixed from other considerations. This method can also verify the form factor values and signs obtained from the K^+ -> l^+ nu_l e^+ e^- decays. A new experiment with sensitivity to the normal and transverse muon polarizations of about 10^-4 will provide a unique possibility to determine the F_V and F_A values with a few percent accuracy.Comment: revtex, 5 pages, 2 figures. Minor corrections made for the journal version of the pape

Search for T-violation in K^+ --> pi^0 mu^+ nu and K^+ --> mu^+ nu gamma Decays

The recent progress in search for T-violating transverse muon polarization in the decays K^+ --> pi^0 mu^+ nu and K^+ --> mu^+ nu gamma in the on-going experiment E246 at KEK is reported. Future prospects in polarization measurements are also discussed.Comment: 11 pages, 5 figures, talk at the Conference of Nuclear Physics Department RAS, 27 November - 1 December 2000, ITEP, Mosco

Beam test results of 3D fine-grained scintillator detector prototype for a T2K ND280 neutrino active target

An upgrade of the long baseline neutrino experiment T2K near detector ND280 is currently being developed with the goal to reduce systematic uncertainties in the prediction of number of events at the far detector Super-Kamiokande. The upgrade program includes the design and construction of a new highly granular fully active scintillator detector with 3D WLS fiber readout as a neutrino target. The detector of about $200\times 180\times 60~cm^3$ in size and a mass of $\sim$2.2~tons will be assembled from about $2\times10^6$ plastic scintillator cubes of $1\times1\times1~cm^3$. Each cube is read out by three orthogonal Kuraray Y11 Wave Length Shifting (WLS) fibers threaded through the detector. A detector prototype made of 125 cubes was assembled and tested in a charged particle test beam at CERN in the fall of 2017. This paper presents the results obtained on the light yield and timing as well as on the optical cross-talk between the cubes.Comment: 5 pages, 8 figure

Scintillator counters with WLS fiber/MPPC readout for the side muon range detector (SMRD)of the T2K experiment

The T2K neutrino experiment at J-PARC uses a set of near detectors to measure the properties of an unoscillated neutrino beam and neutrino interaction cross-sections. One of the sub-detectors of the near-detector complex, the side muon range detector (SMRD), is described in the paper. The detector is designed to help measure the neutrino energy spectrum, to identify background and to calibrate the other detectors. The active elements of the SMRD consist of 0.7 cm thick extruded scintillator slabs inserted into air gaps of the UA1 magnet yokes. The readout of each scintillator slab is provided through a single WLS fiber embedded into a serpentine shaped groove. Two Hamamatsu multi-pixel avalanche photodiodes (MPPC's) are coupled to both ends of the WLS fiber. This design allows us to achieve a high MIP detection efficiency of greater than 99%. A light yield of 25-50 p.e./MIP, a time resolution of about 1 ns and a spatial resolution along the slab better than 10 cm were obtained for the SMRD counters.Comment: 7 pages, 4 figures; talk at TIPP09, March 12-17, Tsukuba, Japan; to be published in the conference proceeding

Application of Hamamatsu MPPC to T2K Neutrino Detectors

A special type of Hamamatsu MPPC, with a sensitive area of 1.3x1.3mm^2 containing 667 pixels with 50x50um^2 each, has been developed for the near neutrino detector in the T2K long baseline neutrino experiment. About 60 000 MPPCs will be used in total to read out the plastic scintillator detectors with wavelength shifting fibers. We report on the basic performance of MPPCs produced for T2K.Comment: Contribution to the proceedings of NDIP 2008, Aix-les-Bains, France, June 15-20, 200

Scintillator detectors with long WLS fibers and multi-pixel photodiodes

We have studied the possibility of using Geiger mode multi-pixel photodiodes to read out long scintillator bars with a single wavelength-shifting fiber embedded along the bar. This detector configuration can be used in large volume detectors in future long baseline neutrino oscillation experiments. Prototype bars of 0.7 cm thickness and different widths have been produced and tested using two types of multi-pixel photodiodes: MRS APD (CPTA, Moscow) and MPPC (Hamamatsu). A minimum light yield of 7.2 p.e./MeV was obtained for a 4 cm wide bar