Er-doped Tellurite glasses for planar waveguide power amplifier with extended gain bandwidth

Tellurite glass compositions doped with erbium and erbium/ytterbium optimised to support extended gain bandwidth with significant amplification have been fabricated, and their thermal, optical absorption, excitation and luminescence properties investigated. Each rare-earth dopant concentration was set at 1x1020/cm3. Broad emission cross-section bandwidths up to 50nm FWHM were observed, with fluorescence lifetimes of ~3ms. Collinear pump probe measurements on ~4mm thick bulk samples revealed peak gains of up to 2.1dB/cm at a wavelength of 1535nm in the co-doped material, with an incident pump intensity of only Iinc~8kW/cm2 at a wavelength of 974nm. At equivalent absorbed pump powers between co-doped and single doped materials the relative gain was 1.25dB/cm (Iinc~4kW/cm2) and 0.9dB/cm (Iinc~8kW/cm2) respectively, demonstrating efficient energy transfer from the ytterbium to erbium ions. Excited state absorption at longer wavelengths was observed and characterised and its implication on realising sufficient gain in the wavelength band of interest is discussed

Possible Dibaryons with Strangeness s=-5

In the framework of $RGM$, the binding energy of the six quark system with strangeness s=-5 is systematically investigated under the SU(3) chiral constituent quark model. The single $\Xi^*\Omega$ channel calculation with spins S=0 and 3 and the coupled $\Xi\Omega$ and $\Xi^*\Omega$ channel calculation with spins S=1 and 2 are considered, respectively. The results show following observations: In the spin=0 case, $\Xi^* \Omega$ is a bound dibaryon with the binding energy being $80.0 \sim 92.4 MeV$. In the S=1 case, $\Xi\Omega$ is also a bound dibaryon. Its binding energy is ranged from $26.2 MeV$ to $32.9 MeV$. In the S=2 and S=3 cases, no evidence of bound dibaryons are found. The phase shifts and scattering lengths in the S=0 and S=1 cases are also given.Comment: 10 pages, late

The influence of quintessence on the motion of a binary system in cosmology

We employ the metric of Schwarzschild space surrounded by quintessential matter to study the trajectories of test masses on the motion of a binary system. The results, which are obtained through the gradually approximate approach, can be used to search for dark energy via the difference of the azimuth angle of the pericenter. The classification of the motion is discussed.Comment: 7 pages, 1 figur

Social and cultural origins of motivations to volunteer a comparison of university students in six countries

Although participation in volunteering and motivations to volunteer (MTV) have received substantial attention on the national level, particularly in the US, few studies have compared and explained these issues across cultural and political contexts. This study compares how two theoretical perspectives, social origins theory and signalling theory, explain variations in MTV across different countries. The study analyses responses from a sample of 5794 students from six countries representing distinct institutional contexts. The findings provide strong support for signalling theory but less so for social origins theory. The article concludes that volunteering is a personal decision and thus is influenced more at the individual level but is also impacted to some degree by macro-level societal forces

Cryoprotectant kinetic analysis of a human articular cartilage vitrification protocol

AbstractWe recently published a protocol to vitrify human articular cartilage and a method of cryoprotectant removal in preparation for transplantation. The current study’s goal was to perform a cryoprotectant kinetic analysis and theoretically shorten the procedure used to vitrify human articular cartilage. First, the loading of the cryoprotectants was modeled using Fick’s law of diffusion, and this information was used to predict the kinetics of cryoprotectant efflux after the cartilage sample had been warmed. We hypothesized that diffusion coefficients obtained from the permeation of individual cryoprotectants into porcine articular cartilage could be used to provide a reasonable prediction of the cryoprotectant loading and of the combined cryoprotectant efflux from vitrified human articular cartilage. We tested this hypothesis with experimental efflux measurements. Osteochondral dowels from three patients were vitrified, and after warming, the articular cartilage was immersed in 3 mL X-VIVO at 4 °C in two consecutive solutions, each for 24 h, with the solution osmolality recorded at various times. Measured equilibrium values agreed with theoretical values within a maximum of 15% for all three samples. The results showed that diffusion coefficients for individual cryoprotectants determined from experiments with 2-mm thick porcine cartilage can be used to approximate the rate of efflux of the combined cryoprotectants from vitrified human articular cartilage of similar thickness. Finally, Fick’s law of diffusion was used in a computational optimization to shorten the protocol with the constraint of maintaining the theoretical minimum cryoprotectant concentration needed to achieve vitrification. The learning provided by this study will enable future improvements in tissue vitrification

A portable high power diode laser-based single-stage ceramic tile grout sealing system

By means of a 60 W high power diode laser (HPDL) and a specially developed grout material the void between adjoining ceramic tiles has been successfully sealed. A single-stage process has been developed which uses a crushed ceramic tile mix to act as a tough, inexpensive bulk substrate and a glazed enamel surface to provide an impervious surface glaze. The single-stage ceramic tile grout sealing process yielded seals produced in normal atmospheric conditions that displayed no discernible cracks and porosities. The single-stage grout is simple to formulate and easy to apply. Tiles were successfully sealed with power densities as low as 200 kW/mm2 and at rates of up to 600 mm/min. Bonding of the enamel to the crushed ceramic tile mix was identified as being primarily due to van der Waals forces and, on a very small scale, some of the crushed ceramic tile mix material dissolving into the glaze. In terms of mechanical, physical and chemical characteristics, the single-stage ceramic tile grout was found to be far superior to the conventional epoxy tile grout and, in many instances, matched and occasionally surpassed that of the ceramic tiles themselves. What is more, the development of a hand-held HPDL beam delivery unit and the related procedures necessary to lead to the commercialisation of the single-stage ceramic tile grout sealing process are presented. Further, an appraisal of the potential hazards associated with the use of the HPDL in an industrial environment and the solutions implemented to ensure that the system complies with the relevant safety standards are given

The contribution of cosmic rays to global warming

A search has been made for a contribution of the changing cosmic ray intensity to the global warming observed in the last century. The cosmic ray intensity shows a strong 11 year cycle due to solar modulation and the overall rate has decreased since 1900. These changes in cosmic ray intensity are compared to those of the mean global surface temperature to attempt to quantify any link between the two. It is shown that, if such a link exists, the changing cosmic ray intensity contributes less than 8% to the increase in the mean global surface temperature observed since 1900.Comment: 12 pages, 5 figures, accepted for publication in J. of Atmospheric and Solar-Terrestrial physic

Confinement and scaling in deep inelastic scattering

We show that parton confinement in the final state generates large $1/Q^2$ corrections to Bjorken scaling, thus leaving less room for the logarithmic corrections. In particular, the $x$-scaling violations at large $x$ are entirely described in terms of power corrections. For treatment of these non-perturbative effects, we derive a new expansion in powers of $1/Q^2$ for the structure function that is free of infra-red singularities and which reduces corrections to the leading term. The leading term represents scattering from an off-mass-shell parton, which keeps the same virtual mass in the final state. It is found that this quasi-free term is a function of a new variable $\bar x$, which coincides with the Bjorken variable $x$ for $Q^2\to\infty$. The two variables are very different, however, at finite $Q^2$. In particular, the variable $\bar x$ depends on the invariant mass of the spectator particles. Analysis of the data at large $x$ shows excellent scaling in the variable $\bar x$, and determines the value of the diquark mass to be close to zero. $\bar x$-scaling allows us to extract the structure function near the elastic threshold. It is found to behave as $F_2\sim (1-x)^{3.7}$. Predictions for the structure functions based on $\bar x$-scaling are made.Comment: Discussion of target mass corrections is added. Accepted for publication in Phys. Rev.

A switchable controlled-NOT gate in a spin-chain NMR quantum computer

A method of switching a controlled-NOT gate in a solid-stae NMR quantum computer is presented. Qubits of I=1/2 nuclear spins are placed periodically along a quantum spin chain (1-D antiferromagnet) having a singlet ground state with a finite spin gap to the lowest excited state caused by some quantum effect. Irradiation of a microwave tuned to the spin gap energy excites a packet of triplet magnons at a specific part of the chain where control and target qubits are involved. The packet switches on the Suhl-Nakamura interaction between the qubits, which serves as a controlled NOT gate. The qubit initialization is achieved by a qubit initializer consisting of semiconducting sheets attached to the spin chain, where spin polarizations created by the optical pumping method in the semiconductors are transferred to the spin chain. The scheme allows us to separate the initialization process from the computation, so that one can optimize the computation part without being restricted by the initialization scheme, which provides us with a wide selection of materials for a quantum computer.Comment: 8 pages, 5 figure

Plasmon-pole approximation for semiconductor quantum wire electrons

We develop the plasmon-pole approximation for an interacting electron gas confined in a semiconductor quantum wire. We argue that the plasmon-pole approximation becomes a more accurate approach in quantum wire systems than in higher dimensional systems because of severe phase-space restrictions on particle-hole excitations in one dimension. As examples, we use the plasmon-pole approximation to calculate the electron self-energy due to the Coulomb interaction and the hot-electron energy relaxation rate due to LO-phonon emission in GaAs quantum wires. We find that the plasmon-pole approximation works extremely well as compared with more complete many-body calculations.Comment: 16 pages, RevTex, figures included. Also available at http://www-cmg.physics.umd.edu/~lzheng