A laser velocimeter flow survey above a stalled wing

A laser velocimeter operating in the backscatter mode was used to survey the flow about a stalled wing installed in the Langley V/STOL tunnel. Mean velocities and magnitudes of velocity fluctuations were calculated from measurements of two orthogonal components of velocity. Free shear mixing layers above and below a large separated flow region were defined. Velocity power spectra were calculated at two points in the flow field. The flow-field survey was carried out about a rectangular aspect-ratio-8 wing with an airfoil section. The wing angle of attack was 19.4 deg, the Mach number was 0.148, and the nominal Reynolds number was 1 x 1 million

New nickel-base wrought superalloy with applications up to 1253 K (1800 F)

Alloy possesses combination of high tensile strength at low and intermediate temperatures to 1033 K with good rupture strength at high temperatures to 1255 K. Alloy has promise for turbine disk application in future gas turbine engines and for wrought integrally bladed turbine wheel; thickness and weight of disk portion of wheel could be reduced

Extreme H isotopic anomalies in chondritic organic matter

Extract from introduction: We have conducted ionprobe (IMS6f and NanoSIMS) imaging studies of various samples for H, D, C, 14N and 15N. These will ultimately be correlated with micro-analytic techniques such as FIB/TEM or STXM/XANES. We analyzed matrix fragments from Bells (CM2), Al Rais (CR2) and Tagish Lake (unique) [2], high purity insoluble organic matter (IOM) [3] extracted from EET92042 (“EET”, CR2), Bells, Murchison (CM2), Allende (CV3), Krymka (LL3.1) and, for comparison, 3 IDPs

Correlation of laser velocimeter measurements over a wing with results of two prediction techniques

The flow field at the center line of an unswept wing with an aspect ratio of eight was determined using a two dimensional viscous flow prediction technique for the flow field calculation, and a three dimensional potential flow panel method to evaluate the degree of two dimensionality achieved at the wing center line. The analysis was made to provide an acceptable reference for comparison with velocity measurements obtained from a fringe type laser velocimeter optics systems operating in the backscatter mode in the Langley V/STOL tunnel. Good agreement between laser velocimeter measurements and theoretical results indicate that both methods provide a true representation of the velocity field about the wing at angles of attack of 0.6 and 4.75 deg

The twisted fourth moment of the Riemann zeta function

We compute the asymptotics of the fourth moment of the Riemann zeta function times an arbitrary Dirichlet polynomial of length $T^{{1/11} - \epsilon}$Comment: 28 pages. v2: added reference

Optical and Infrared Spectroscopy

Contains research objectives and reports on one research project.Joint Services Electronics Programs (U. S. Army, U. S. Navy, and U. S. Air Force) under Contract DA 36-039-AMC-03200(E

Nine percent nickel steel heavy forging weld repair study

The feasibility of making weld repairs on heavy section 9% nickel steel forgings such as those being manufactured for the National Transonic Facility fan disk and fan drive shaft components was evaluated. Results indicate that 9% nickel steel in heavy forgings has very good weldability characteristics for the particular weld rod and weld procedures used. A comparison of data for known similar work is included

An Efficient Targeting Strategy for Multiobject Spectrograph Surveys: the Sloan Digital Sky Survey "Tiling" Algorithm

Large surveys using multiobject spectrographs require automated methods for deciding how to efficiently point observations and how to assign targets to each pointing. The Sloan Digital Sky Survey (SDSS) will observe around 10 6 spectra from targets distributed over an area of about 10,000 deg2, using a multiobject fiber spectrograph that can simultaneously observe 640 objects in a circular field of view (referred to as a "tile") 1°.49 in radius. No two fibers can be placed closer than 55Prime; during the same observation; multiple targets closer than this distance are said to "collide." We present here a method of allocating fibers to desired targets given a set of tile centers that includes the effects of collisions and that is nearly optimally efficient and uniform. Because of large-scale structure in the galaxy distribution (which form the bulk of the SDSS targets), a naive covering of the sky with equally spaced tiles does not yield uniform sampling. Thus, we present a heuristic for perturbing the centers of the tiles from the equally spaced distribution that provides more uniform completeness. For the SDSS sample, we can attain a sampling rate of greater than 92% for all targets, and greater than 99% for the set of targets that do not collide with each other, with an efficiency greater than 90% (defined as the fraction of available fibers assigned to targets). The methods used here may prove useful to those planning other large surveys

Surface characterization of selected LDEF tray clamps

The surface characterization of chromic acid anodized 6061-T6 aluminum alloy tray clamps has shown differences in surface chemistry depending upon the position on the Long Duration Exposure Facility (LDEF). Water contact angle results showed no changes in wettability of the tray clamps. The overall surface topography of the control, trailing edge(E3) and leading edge(D9) samples was similar. The thickness of the aluminum oxide layer for all samples determined by Auger depth profiling was less than one micron. X-ray photoelectron spectroscopy (XPS) analysis of the tray clamps showed significant differences in the surface composition. Carbon and silicon containing compounds were the primary contaminants detected

Distributions of gaps and end-to-end correlations in random transverse-field Ising spin chains

A previously introduced real space renormalization-group treatment of the random transverse-field Ising spin chain is extended to provide detailed information on the distribution of the energy gap and the end-to-end correlation function for long chains with free boundary conditions. Numerical data, using the mapping of the problem to free fermions, are found to be in good agreement with the analytic finite size scaling predictions.Comment: 12 pages revtex, 10 figures, submitted to Phys. Rev.