131 research outputs found

    Effects of ultrasonic treatment on the preparation of transparent glass-ceramic phosphor

    Get PDF
    The effects of ultrasonic surface treatment (UST) on the crystallization behavior and optical emission properties were investigated for the transparent glass-ceramics prepared from calcium aluminosilicate glasses co-doped with Eu(2+), Nd(3+). The glass-ceramics A were prepared by sintering a glass 45CaO・45Al(2)O(3)・10SiO(2) (mol%) containing 0.5Eu(2)O(3)+1Nd(2)O(3) under a 2% H(2)+98% Ar reducing atmosphere. In the glass-ceramics A, three crystalline phases, CaAl(2)O(4) (CA), CaAl(4)O(7) (CA2) and Ca(2)Al(2)SiO(7) (CAS) were commonly confirmed by X-ray diffraction. No drastic change in the amount of the precipitated crystalline phases was observed even in the case using UST of CA powders. It was suggested that the optical emission properties of the glass-ceramics A was responsible for the CA2 crystals. The glass-ceramics B were also prepared from a 51CaO・42Al(2)O(3)・7SiO(2) glass. The CA crystals were separately precipitated in the glass-ceramics B. In particular, a large amount of CA was successfully produced by stirring the UST suspension to prevent the sedimentation of the UST particles. The glass-ceramic B so-prepared showed strong photoluminescence but weak phosphorescence compared with other glass-ceramics B, indicating that the photoluminescence and phosphorescence were originated in different electron-trapping levels. The amount of the trap levels associated with the long lasting phosphorescence, such as oxygen vacancies, was probably small in the glass-ceramic B prepared with the stirring UST

    Low-Dose Intravenous Alteplase in Wake-Up Stroke

    Get PDF
    Background and Purpose—We assessed whether lower-dose alteplase at 0.6 mg/kg is efficacious and safe for acute fluid-attenuated inversion recovery-negative stroke with unknown time of onset. Methods—This was an investigator-initiated, multicenter, randomized, open-label, blinded-end point trial. Patients met the standard indication criteria for intravenous thrombolysis other than a time last-known-well >4.5 hours (eg, wake-up stroke). Patients were randomly assigned (1:1) to receive alteplase at 0.6 mg/kg or standard medical treatment if magnetic resonance imaging showed acute ischemic lesion on diffusion-weighted imaging and no marked corresponding hyperintensity on fluid-attenuated inversion recovery. The primary outcome was a favorable outcome (90-day modified Rankin Scale score of 0–1). Results—Following the early stop and positive results of the WAKE-UP trial (Efficacy and Safety of MRI-Based Thrombolysis in Wake-Up Stroke), this trial was prematurely terminated with 131 of the anticipated 300 patients (55 women; mean age, 74.4±12.2 years). Favorable outcome was comparable between the alteplase group (32/68, 47.1%) and the control group (28/58, 48.3%; relative risk [RR], 0.97 [95% CI, 0.68–1.41]; P=0.892). Symptomatic intracranial hemorrhage within 22 to 36 hours occurred in 1/71 and 0/60 (RR, infinity [95% CI, 0.06 to infinity]; P>0.999), respectively. Death at 90 days occurred in 2/71 and 2/60 (RR, 0.85 [95% CI, 0.06–12.58]; P>0.999), respectively. Conclusions—No difference in favorable outcome was seen between alteplase and control groups among patients with ischemic stroke with unknown time of onset. The safety of alteplase at 0.6 mg/kg was comparable to that of standard treatment. Early study termination precludes any definitive conclusions

    Developments in the Ni–Nb–Zr amorphous alloy membranes

    Get PDF
    Most of the global H2 production is derived from hydrocarbon-based fuels, and efficient H2/CO2 separation is necessary to deliver a high-purity H2 product. Hydrogen-selective alloy membranes are emerging as a viable alternative to traditional pressure swing adsorption processes as a means for H2/CO2 separation. These membranes can be formed from a wide range of alloys, and those based on Pd are the closest to commercial deployment. The high cost of Pd (USD *31,000 kg-1) is driving the development of less-expensive alternatives, including inexpensive amorphous (Ni60Nb40)100-xZrx alloys. Amorphous alloy membranes can be fabricated directly from the molten state into continuous ribbons via melt spinning and depending on the composition can exhibit relatively high hydrogen permeability between 473 and 673 K. Here we review recent developments in these low-cost membrane materials, especially with respect to permeation behavior, electrical transport properties, and understanding of local atomic order. To further understand the nature of these solids, atom probe tomography has been performed, revealing amorphous Nb-rich and Zr-rich clusters embedded in majority Ni matrix whose compositions deviated from the nominal overall composition of the membrane

    Organic–Inorganic Surface Modifications for Titanium Implant Surfaces

    Full text link

    Research and Design of a Routing Protocol in Large-Scale Wireless Sensor Networks

    Get PDF
    无线传感器网络,作为全球未来十大技术之一,集成了传感器技术、嵌入式计算技术、分布式信息处理和自组织网技术,可实时感知、采集、处理、传输网络分布区域内的各种信息数据,在军事国防、生物医疗、环境监测、抢险救灾、防恐反恐、危险区域远程控制等领域具有十分广阔的应用前景。 本文研究分析了无线传感器网络的已有路由协议,并针对大规模的无线传感器网络设计了一种树状路由协议,它根据节点地址信息来形成路由,从而简化了复杂繁冗的路由表查找和维护,节省了不必要的开销,提高了路由效率,实现了快速有效的数据传输。 为支持此路由协议本文提出了一种自适应动态地址分配算——ADAR(AdaptiveDynamicAddre...As one of the ten high technologies in the future, wireless sensor network, which is the integration of micro-sensors, embedded computing, modern network and Ad Hoc technologies, can apperceive, collect, process and transmit various information data within the region. It can be used in military defense, biomedical, environmental monitoring, disaster relief, counter-terrorism, remote control of haz...学位:工学硕士院系专业:信息科学与技术学院通信工程系_通信与信息系统学号:2332007115216
    corecore