Alumina-on-alumina total hip arthroplasty. A five-year minimum follow-up study

BACKGROUND: Ceramic-on-ceramic couplings are attractive alternative bearing surfaces that have been reported to eliminate or reduce problems related to polyethylene wear debris. Disappointing experiences with alumina ceramic bearings in the past have led to many improvements in the manufacture and design of ceramic implants. The purpose of the present study was to report the results of contemporary alumina-on-alumina total hip arthroplasties with regard to wear, osteolysis, and fracture of the ceramic after a minimum duration of follow-up of five years. METHODS: We evaluated the results of a consecutive series of 100 primary alumina-on-alumina total hip arthroplasties that had been performed with use of a metal-backed socket and a cementless stem in eighty-four patients. All of the patients were sixty-five years of age or younger (mean age, forty-one years), and a single surgeon performed all of the procedures. After a minimum duration of follow-up of sixty months, one patient (one hip) had died and four patients (six hips) had been lost to follow-up, leaving a total of seventy-nine patients (ninety-three hips) available for study. All of these patients were evaluated clinically and radiographically with special attention to wear, periprosthetic osteolysis, and ceramic failure. RESULTS: The mean Harris hip score was 97 points at the time of the latest follow-up evaluation. All prostheses demonstrated radiographic evidence of bone ingrowth. No implant was loose radiographically, and no implant was revised. Ceramic wear was not detectable in the thirty-seven hips in which the femoral head could be differentiated from the cup on radiographs. Periprosthetic osteolysis was not observed in any hip. A fracture of the alumina femoral head and a peripheral chip fracture of the alumina insert occurred in one hip following a motor-vehicle accident. CONCLUSIONS: The results of contemporary alumina-on-alumina total hip arthroplasty with a metal-backed socket and a cementless stem were encouraging after a minimum duration of follow-up of five years. We believe that these improved alumina-on-alumina bearing implants offer a promising option for younger, active patients

Preparation of nanoscale inorganic CsPbIxBr3-x perovskite photosensitizers on the surface of mesoporous TiO2 film for solid-state sensitized solar cells

Metal chalcogenide quantum dot (QD)-like all-inorganic nanoscale perovskite photosensitizers of CsPbIxBr3-x were prepared on the surface of mesoscopic TiO2 film by a direct two-step spin-coating of lead and cesium halide precursors for application into solid-state dye-sensitized solar cells (DSSCs), as confirmed by impedance frequency response analysis. A few nanometer-sized hemisphere-shaped dots of CsPbIxBr3-x perovskites were deposited and distributed separately onto TiO2, which were checked by scanning and transmission electron microscopic (SEM and TEM) techniques. The as-deposited CsPbIxBr3-x perovskites were stable only in the case of including about 20% or more bromide in the composition of halides. When the bromide content increased in the ratio of halides of CsPbIxBr3-x, gradual decrease in lattice spacing and blue-shift of emission peaks were observed in X-ray diffraction (XRD) and photoluminescence (PL) measurements, respectively. These well-defined nano-particulate CsPbIxBr3-x perovskites were incorporated into solid-state DSSCs and tested as a new type of photosensitizers. The initial power conversion efficiency (PCE) of ca. 1.0–3.5% based on relatively thin mesoporous TiO2 film (~1 μm) looks promising with many parameters remaining for possibly more optimization. The best result, 3.79%, was obtained from CsPbI2.2Br0.80 25 days after initial measurement. These CsPbIxBr3-x-sensitized cells displayed a stable record of PCE over ~2 month and no hysteresis behavior in current-voltage traces

A Case Report of Familial Benign Hypocalciuric Hypercalcemia: A Mutation in the Calcium-Sensing Receptor Gene

Familial benign hypocalciuric hypercalcemia (FBHH) is an autosomal dominant trait with high penetrance, clinically manifestating a relatively benign, lifelong, persistent hypercalcemia and hypocalciuria without hypercalcemic related complications. The calcium-sensing receptor (CaSR) plays an important role in the regulation of PTH secretion and calcium metabolism. Here we present a family with FBHH of an autosomal dominant inheritance. A heterozygous mutation of E297K (GAG→AAG, exon 4) of CaSR gene was found in 3 family members. To our knowledge, it is the first confirmed case of FBHH with CaSR gene mutation in Korea

The Clinical Usefulness of the SD Bioline Influenza Antigen Test® for Detecting the 2009 Influenza A (H1N1) Virus

Though the 2009 worldwide influenza A (H1N1) pandemic has been declared to have ended, the influenza virus is expected to continue to circulate from some years as a seasonal influenza. A rapid antigen test (RAT) can aid in rapid diagnosis and allow for early antiviral treatment. We evaluated the clinical usefulness of RAT using SD Bioline Influenza Antigen Test® kit to detect the influenza virus, considering various factors. From August 1, 2009 to October 10, 2009, a total of 938 patients who visited the outpatient clinic at Korea University Guro Hospital with influenza-like illnesses were enrolled in the study. Throat or nasopharyngeal swab specimens were obtained from each of the patients. Using these specimens, we evaluated the influenza detection rate by rapid antigen test based on the real-time reverse-transcriptase polymerase chain reaction (rRT-PCR) method. In comparison with rRT-PCR, the sensitivity and specificity of the RAT were 44.0% and 99.9%, respectively. The cyclic threshold values of RAT negative specimens were higher than RAT positive specimens (30.1±3.1 vs. 28.3±3.9, p=0.031). The sensitivity of the RAT kit was higher in patients who visited clinics within two days of symptom onset (60.4% vs. 11.1%, p=0.026). The results of this study show that the RAT cannot be recommended for general use in all patients with influenza-like illness because of its low sensitivity. The RAT may be used, only in the settings with limited diagnostic resources, for patients who visit a clinic within two days of symptom onset

Hypofractionated High-Dose Intensity-Modulated Radiotherapy (60 Gy at 2.5 Gy per Fraction) for Recurrent Renal Cell Carcinoma: A Case Report

A patient with renal cell carcinoma (RCC) developed synchronous bone metastasis with metachronous relapses to the bone and renal fossa. The primary lesion was initially removed surgically, and the metastatic bone lesions and locally recurrent tumours were treated by a high-fractional dose and high-total-dose intensity-modulated radiotherapy (IMRT, 60 Gy at 2.5 Gy per fraction) without significant side effects. All the grossly relapsed tumors underwent complete remission (CR) within a short time after IMRT. To date, CR has been maintained for more than two years. This case study reports the successful treatment of radioresistant RCC using a new scheme that involves a fractionation regimen with a high precision radiotherapy