5,052 research outputs found
Technique for producing wind-tunnel heat-transfer models
Inexpensive thin skinned wind tunnel models with thermocouples on certain surface areas were fabricated. Thermocouples were designed for measuring aerodynamic heat transfer in wind tunnels
Assessments of Rhagoletis pomonella (Diptera: Tephritidae) infestation of temperate, tropical, and subtropical fruit in the field and laboratory in Washington State, U.S.
To understand the likelihood of any risk of apple maggot, Rhagoletis pomonella (Walsh) (Diptera: Tephritidae), to domestic and foreign fruit export markets, knowledge of its host plant use is needed. Here, assessments of R. pomonella infestation of temperate, tropical, and subtropical fruit were made in the field and laboratory in Washington State, U.S. In field surveys in 2010â 2017 in central Washington, 6.7% of Crataegus douglasii and 6.1% of feral Malus domestica trees (both temperate plants) in fly-managed (insecticide- treated) sites were infested by larvae. In unmanaged sites, 54.1% of C. douglasii and 16.3% of feral M. domestica tree samples were infested. In field surveys of 36 types of temperate fruit in 2015â2018 in southwestern Washington, new host records for R. pomonella were one species and three hybrids of Crataegus, as well as Prunus domestica subsp. syriaca â all of which produced adult flies. In addition, Prunus avium was a new host record for Washington State, producing one adult fly. Prunus armeniaca x Prunus salicina and Vitis vinifera exposed to flies in the laboratory produced adult flies. Of 37 types of tropical and subtropical fruit hung in fly-infested M. domestica trees in southwestern Washington, only Mangifera indica produced puparia. Out of nine tropical and subtropical fruit types in laboratory tests, Musa acuminata x balbisiana produced puparia but no adult flies. Results provide a basis for further research and hypotheses concerning host use by R. pomonella and its potential impact on protecting both U.S. and tropical and subtropical fruit markets
A high order compact scheme for hypersonic aerothermodynamics
A novel high order compact scheme for solving the compressible Navier-Stokes equations has been developed. The scheme is an extension of a method originally proposed for solving the Euler equations, and combines several techniques for the solution of compressible flowfields, such as upwinding, limiting and flux vector splitting, with the excellent properties of high order compact schemes. Extending the method to the Navier-Stokes equations is achieved via a Kinetic Flux Vector Splitting technique, which represents an unusual and attractive way to include viscous effects. This approach offers a more accurate and less computationally expensive technique than discretizations based on more conventional operator splitting. The Euler solver has been validated against several inviscid test cases, and results for several viscous test cases are also presented. The results confirm that the method is stable, accurate and has excellent shock-capturing capabilities for both viscous and inviscid flows
Star Formation in Cluster Galaxies at 0.2<z<0.55
The rest frame equivalent width of the [OII]3727 emission line, W(OII), has
been measured for cluster and field galaxies in the CNOC redshift survey of
rich clusters at 0.2<z<0.55. Emission lines of any strength in cluster galaxies
at all distances from the cluster centre, out to 2R_{200}, are less common than
in field galaxies. The mean W(OII) in cluster galaxies more luminous than
M_r^k<-18.5 + 5\log h (q_o=0.1) is 3.8 \pm 0.3 A (where the uncertainty is the
1 sigma error in the mean), significantly less than the field galaxy mean of
11.2 \pm 0.3 A. For the innermost cluster members (R<0.3R_{200}), the mean
W(OII) is only 0.3 \pm 0.4 A. Thus, it appears that neither the infall process
nor internal tides in the cluster induce detectable excess star formation in
cluster galaxies relative to the field. The colour-radius relation of the
sample is unable to fully account for the lack of cluster galaxies with
W(OII)>10 A, as expected in a model of cluster formation in which star
formation is truncated upon infall. Evidence of supressed star formation
relative to the field is present in the whole cluster sample, out to 2 R_{200},
so the mechanism responsible for the differential evolution must be acting at a
large distance from the cluster centre, and not just in the core. The mean star
formation rate in the cluster galaxies with the strongest emission corresponds
to an increase in the total stellar mass of less than about 4% if the star
formation is due to a secondary burst lasting 0.1 Gyr.Comment: aasms4 latex, 3 postscript figures, accepted for publication in ApJ
Letters. Also available at http://astrowww.phys.uvic.ca/~balogh
Yields of oxidized volatile organic compounds during the OH radical initiated oxidation of isoprene, methyl vinyl ketone, and methacrolein under high-NO_x conditions
We present first-generation and total production yields of glyoxal, methylglyoxal, glycolaldehyde, and hydroxyacetone from the oxidation of isoprene, methyl vinyl ketone (MVK), and methacrolein (MACR) with OH under high NO_x conditions. Several of these first-generation yields are not included in commonly used chemical mechanisms, such as the Leeds Master Chemical Mechanism (MCM) v. 3.2. The first-generation yield of glyoxal from isoprene was determined to be 2.1 (±0.6)%. Inclusion of first-generation production of glyoxal, glycolaldehyde and hydroxyacetone from isoprene greatly improves performance of an MCM based model during the initial part of the experiments. In order to further improve performance of the MCM based model, higher generation glyoxal production was reduced by lowering the first-generation yield of glyoxal from C5 hydroxycarbonyls. The results suggest that glyoxal production from reaction of OH with isoprene under high NO_x conditions can be approximated by inclusion of a first-generation production term together with secondary production only via glycolaldehyde. Analogously, methylglyoxal production can be approximated by a first-generation production term from isoprene, and secondary production via MVK, MACR and hydroxyacetone. The first-generation yields reported here correspond to less than 5% of the total oxidized yield from isoprene and thus only have a small effect on the fate of isoprene. However, due to the abundance of isoprene, the combination of first-generation yields and reduced higher generation production of glyoxal from C5 hydroxycarbonyls is important for models that include the production of the small organic molecules from isoprene
Analysis of photochemical and dark glyoxal uptake: Implications for SOA formation
The dependence of glyoxal uptake onto deliquesced ammonium sulfate seed aerosol was studied under photochemical (light + hydroxyl radical (OH)) and dark conditions. In this study, the chemical composition of aerosol formed from glyoxal is identical in the presence or absence of OH. In addition, there was no observed OH dependence on either glyoxal uptake or glyoxal-driven aerosol growth for this study. These findings demonstrate that, for the system used here, glyoxal uptake is not affected by the presence of OH. In combination with previous studies, this shows that the exact nature of the type of seed aerosol, in particular the presence of a coating, has a large influence on fast photochemical uptake of glyoxal. Due to the challenge of relating this seed aerosol dependence to ambient conditions, this work highlights the resulting difficulty in quantitatively including SOA formation from glyoxal in models
Dichotomous development of the gut microbiome in preterm infants.
BackgroundPreterm infants are at risk of developing intestinal dysbiosis with an increased proportion of Gammaproteobacteria. In this study, we sought the clinical determinants of the relative abundance of feces-associated Gammaproteobacteria in very low birth weight (VLBW) infants. Fecal microbiome was characterized at â€â2 weeks and during the 3rd and 4th weeks after birth, by 16S rRNA amplicon sequencing. Maternal and infant clinical characteristics were extracted from electronic medical records. Data were analyzed by linear mixed modeling and linear regression.ResultsClinical data and fecal microbiome profiles of 45 VLBW infants (gestational age 27.9â±â2.2 weeks; birth weight 1126 ± 208 g) were studied. Three stool samples were analyzed for each infant at mean postnatal ages of 9.9â±â3, 20.7â±â4.1, and 29.4â±â4.9 days. The average relative abundance of Gammaproteobacteria was 42.5% (0-90%) at â€â2 weeks, 69.7% (29.9-86.9%) in the 3rd, and 75.5% (54.5-86%) in the 4th week (pâ<â0.001). Hierarchical and K-means clustering identified two distinct subgroups: cluster 1 started with comparatively low abundance that increased with time, whereas cluster 2 began with a greater abundance at â€â2 weeks (pâ<â0.001) that decreased over time. Both groups resembled each other by the 3rd week. Single variants of Klebsiella and Staphylococcus described variance in community structure between clusters and were shared between all infants, suggesting a common, hospital-derived source. Fecal Gammaproteobacteria was positively associated with vaginal delivery and antenatal steroids.ConclusionsWe detected a dichotomy in gut microbiome assembly in preterm infants: some preterm infants started with low relative gammaproteobacterial abundance in stool that increased as a function of postnatal age, whereas others began with and maintained high abundance. Vaginal birth and antenatal steroids were identified as predictors of Gammaproteobacteria abundance in the early (â€â2 weeks) and later (3rd and 4th weeks) stool samples, respectively. These findings are important in understanding the development of the gut microbiome in premature infants
Additive Manufacturing of 3D-Architected Multifunctional Metal Oxides
Additive manufacturing (AM) of complex threeâdimensional (3D) metal oxides at the microâ and nanoscales has attracted considerable attention in recent years. Stateâofâtheâart techniques that use slurryâbased or organicâinorganic photoresins are often hampered by challenges in resin preparation and synthesis, and/or by the limited resolution of patterned features. A facile process for fabricating 3Dâarchitected metal oxides via the use of an aqueous metalâionâcontaining photoresin is presented. The efficacy of this process, which is termed photopolymer complex synthesis, is demonstrated by creating nanoarchitected zinc oxide (ZnO) architectures with feature sizes of 250 nm, by first patterning a zincâionâcontaining aqueous photoresin using twoâphoton lithography and subsequently calcining them at 500 ÂșC. Transmission electron microscopy (TEM) analysis reveals their microstructure to be nanocrystalline ZnO with grain sizes of 5.1 ± 1.6 nm. In situ compression experiments conducted in a scanning electron microscope show an emergent electromechanical response: a 200 nm mechanical compression of an architected ZnO structure results in a voltage drop of 0.52 mV. This photopolymer complex synthesis provides a pathway to easily create arbitrarily shaped 3D metal oxides that could enable previously impossible devices and smart materials
On the scaling of entropy viscosity in high order methods
In this work, we outline the entropy viscosity method and discuss how the
choice of scaling influences the size of viscosity for a simple shock problem.
We present examples to illustrate the performance of the entropy viscosity
method under two distinct scalings
- âŠ