LIONS: An AWGR-Based Low-Latency Optical Switch for High-Performance Computing and Data Centers

This paper discusses the architecture of an arrayed waveguide grating router (AWGR)-based low-latency interconnect optical network switch called LIONS, and its different loopback buffering schemes. A proof of concept is demonstrated with a 4 x 4 experimental testbed. A simulator was developed to model the LIONS architecture and was validated by comparing experimentally obtained statistics such as average end-to-end latency with the results produced by the simulator. Considering the complexity and cost in implementing loopback buffers in LIONS, we propose an all-optical negative acknowledgement (AO-NACK) architecture in order to remove the need for loopback buffers. Simulation results for LIONS with AO-NACK architecture and distributed loopback buffer architecture are compared with the performance of the flattened butterfly electrical switching network

Deep level transient spectroscopic study of oxygen implanted melt grown ZnO single crystal

Deep level traps in melt grown ZnO single crystal created by oxygen implantation and subsequent annealing in air were studied by deep level transient spectroscopy measurement between 80 and 300 K. The E C-0.29 eV trap (E3) was the dominant peak in the as-grown sample and no new defects were created in the as-O-implanted sample. The single peak feature of the deep level transient spectroscopy (DLTS) spectra did not change with the annealing temperature up to 750 °C, but the activation energy decreased to 0.22 eV. This was explained in terms of a thermally induced defect having a peak close to but inseparable from the original 0.29 eV peak. A systematic study on a wide range of the rate window for the DLTS measurement successfully separated the Arrhenius plot data originated from different traps. It was inferred that the E3 concentration in the samples did not change after the O-implantation. The traps at E C-0.11, E C-0.16 and E C-0.58 eV were created after annealing. The E C-0.16 eV trap was assigned to an intrinsic defect. No DLTS signal was found after the sample was annealed to 1200 °C. © 2011 IOP Publishing Ltd.postprin

Slow cooling and efficient extraction of C-exciton hot carriers in MoS2 monolayer

In emerging optoelectronic applications, such as water photolysis, exciton fission and novel photovoltaics involving low-dimensional nanomaterials, hot-carrier relaxation and extraction mechanisms play an indispensable and intriguing role in their photo-electron conversion processes. Two-dimensional transition metal dichalcogenides have attracted much attention in above fields recently; however, insight into the relaxation mechanism of hot electron-hole pairs in the band nesting region denoted as C-excitons, remains elusive. Using MoS2 monolayers as a model two-dimensional transition metal dichalcogenide system, here we report a slower hot-carrier cooling for C-excitons, in comparison with band-edge excitons. We deduce that this effect arises from the favourable band alignment and transient excited-state Coulomb environment, rather than solely on quantum confinement in two-dimension systems. We identify the screening-sensitive bandgap renormalization for MoS2 monolayer/graphene heterostructures, and confirm the initial hot-carrier extraction for the C-exciton state with an unprecedented efficiency of 80%, accompanied by a twofold reduction in the exciton binding energy

The curvature match of the tool and surface in the non-vertical coordinate system

2005-2006 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Heavily electron-doped electronic structure and isotropic superconducting gap in AxFe2Se2 (A=K,Cs)

The low energy band structure and Fermi surface of the newly discovered superconductor, AxFe2Se2 (A=K,Cs), have been studied by angle-resolved photoemission spectroscopy. Compared with iron pnictide superconductors, AxFe2Se2 (A=K,Cs) is the most heavily electron-doped with Tc~30 K. Only electron pockets are observed with an almost isotropic superconducting gap of ~10.3 meV, while there is no hole Fermi surface near the zone center, which indicates the inter-pocket hopping or Fermi surface nesting is not a necessary ingredient for the unconventional superconductivity in iron-based superconductors. Thus, the sign changed s$_\pm$ pairing symmetry, a leading candidate proposed for iron-based superconductors, becomes conceptually irrelevant in describing the superconducting state here. A more conventional s-wave pairing is a better description.Comment: 4 pages, 4 figures, published online in Nature Materials 201

Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay

The decay channel $\psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p})$ is studied using a sample of $1.06\times 10^8$ $\psi^\prime$ events collected by the BESIII experiment at BEPCII. A strong enhancement at threshold is observed in the $p\bar{p}$ invariant mass spectrum. The enhancement can be fit with an $S$-wave Breit-Wigner resonance function with a resulting peak mass of $M=1861^{+6}_{-13} {\rm (stat)}^{+7}_{-26} {\rm (syst)} {\rm MeV/}c^2$ and a narrow width that is $\Gamma<38 {\rm MeV/}c^2$ at the 90% confidence level. These results are consistent with published BESII results. These mass and width values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics

Counter-current chromatography for the separation of terpenoids: A comprehensive review with respect to the solvent systems employed

Copyright @ 2014 The Authors.This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.Natural products extracts are commonly highly complex mixtures of active compounds and consequently their purification becomes a particularly challenging task. The development of a purification protocol to extract a single active component from the many hundreds that are often present in the mixture is something that can take months or even years to achieve, thus it is important for the natural product chemist to have, at their disposal, a broad range of diverse purification techniques. Counter-current chromatography (CCC) is one such separation technique utilising two immiscible phases, one as the stationary phase (retained in a spinning coil by centrifugal forces) and the second as the mobile phase. The method benefits from a number of advantages when compared with the more traditional liquid-solid separation methods, such as no irreversible adsorption, total recovery of the injected sample, minimal tailing of peaks, low risk of sample denaturation, the ability to accept particulates, and a low solvent consumption. The selection of an appropriate two-phase solvent system is critical to the running of CCC since this is both the mobile and the stationary phase of the system. However, this is also by far the most time consuming aspect of the technique and the one that most inhibits its general take-up. In recent years, numerous natural product purifications have been published using CCC from almost every country across the globe. Many of these papers are devoted to terpenoids-one of the most diverse groups. Naturally occurring terpenoids provide opportunities to discover new drugs but many of them are available at very low levels in nature and a huge number of them still remain unexplored. The collective knowledge on performing successful CCC separations of terpenoids has been gathered and reviewed by the authors, in order to create a comprehensive document that will be of great assistance in performing future purifications. © 2014 The Author(s)

Molecular structure of the largemouth bass (Micropterus salmoides) Myf5 gene and its effect on skeletal muscle growth

Myogenic Regulatory Factors (MRFs), a family of basic helix-loop-helix (bHLH) transcription factors, play important roles in regulating skeletal muscle development and growth. Myf5, the primary factor of MRFs, initiates myogenesis. Its expression pattern during somitomyogenesis in some fish has been revealed. To further study its effect on fish muscle during postembryonic growth, characterization and function analysis of myf5 cDNA were carried out in largemouth bass. The 1,093 bp cDNA sequence was identified by RT-PCR and 3′RACE, then the ORF of Myf5 cDNA was cloned into the expression vector pcDNA3.1(−)/mycHisB. The recombinant plasmid pcDNA3.1(−)/mycHisB-Myf5 was injected into the dorsal muscle of tilapias. RT-PCR and histochemical results showed that the exogenous gene was transcribed and translated in vivo. Its effect on muscle growth focused on myofiber hypertrophy in white muscle 60 days post injection. This indicated that overexpression of Myf5 can promote myogenesis during the fish muscle postembryonic growth period