The Heart of the Matter: Health Status of Aged Care Clients Receiving Home- and Community-Based Care

Objective. To determine the current health status of home based elderly clients receiving government funded aged care packages. Design. Prospective Observational study. Setting. Community based, home care program in Australia. Participants. Community-dwelling older adults receiving aged care packages. Measurements. A comprehensive test battery of physical, mental and social scales were completed including a Caregiver Strain Index where appropriate. Results. 37% of the 334 subjects were male and the mean age was 81 ± 8 years. Physical functioning was low compared to the Australian population. Depression was highly prevalent with 15.9% severely depressed and 38.7% mildly depressed. 26% of clients screened positive for dementia. Relatively good levels of social support were reported, however social networking activity levels were low. Sixty one percent of clients had caregivers, of whom 63.3% had high levels of strain. Strain was higher in caregivers of clients on higher levels of care (78.5% versus 50.6% highly strained). Conclusion. The data suggests that as a group there is a high degree of comorbidity, and depression, dementia and caregiver strain are highly prevalent. The findings may aid administrators and health policy planners in directing resources to key areas impacting on health outcomes in this group

Photocatalytic Degradation of Methylene Blue under UV Light Irradiation on Prepared Carbonaceous TiO

This study involves the investigation of altering the photocatalytic activity of TiO2 using composite materials. Three different forms of modified TiO2, namely, TiO2/activated carbon (AC), TiO2/carbon (C), and TiO2/PANi, were compared. The TiO2/carbon composite was obtained by pyrolysis of TiO2/PANi prepared by in situ polymerization method, while the TiO2/activated carbon (TiO2/AC) was obtained after treating TiO2/carbon with 1.0 M KOH solution, followed by calcination at a temperature of 450°C. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), thermogravimetric analysis (TG-DTA), Brunauer-Emmet-Teller (BET), and UV-Vis spectroscopy were used to characterize and evaluate the prepared samples. The specific surface area was determined to be in the following order: TiO2/AC > TiO2/C > TiO2/PANi > TiO2 (179 > 134 > 54 > 9 m2 g−1). The evaluation of photocatalytic performance for the degradation of methylene blue under UV light irradiation was also of the same order, with 98 > 84.7 > 69% conversion rate, which is likely to be attributed to the porosity and synergistic effect in the prepared samples

Synthesis, Characterization and Catalytic Performance of H

The purpose of this work is to study the synthesis, characterization, and catalytic performance of two types of solid heteropoly acid catalysts, namely, silicotungstic acid bulk (STAB) and STA-silica sol-gel (STA-SG) compared with sulfuric acid. From the XPS analyses, there was a significant formation of W-O-Si, W-O-W, and Si-O-Si bonding in STA-SG compared to that in STAB. The main spectra of O1s (90.74%, 531.5 eV) followed by other O1s peak (9.26%, 532.8 eV) were due to the presence of W-O-W and W-O-Si bonds, respectively. The STA-SG catalyst was found to be the more environmentally benign solid acid catalyst for the esterification reaction between oleic acid and glycerol due to its lower toxicity supported by silica via sol-gel technique. In addition, the ease of separation for STA-SG catalyst was attributed to its insoluble state in the product phase. The esterification products were then analysed by FTIR and HPLC. Both the H2SO4 and the STAB gave high conversion of 100% and 98% but at a lower selectivity of GME with 81.6% and 89.9%, respectively. On the contrary, the STA-SG enabled a conversion of 94% but with a significantly higher GME selectivity of 95%, rendering it the more efficient solid acid catalyst

Preparation and characterization of tin oxide, SnO2 nanoparticles decorated graphene

SnO2 nanoparticles/graphene (SnO2/GP) nanocomposite was synthesized by a facile microwave method. The X-ray diffraction (XRD) pattern of the nanocomposite corresponded to the diffraction peak typical of graphene and the rutile phase of SnO2 with tetragonal structure. The field emission scanning electron microscope (FESEM) images revealed that the graphene sheets were dotted with SnO2 nanoparticles with an average size of 10 nm. The X-ray photoelectron spectroscopy (XPS) analysis indicated that the development of SnO2/GP resulted from the removal of the oxygenous groups on graphene oxide (GO) by Sn2+ ions. The nanocomposite modified glassy carbon electrode (GCE) showed excellent enhancement of electrochemical performance when interacting with mercury(II) ions in potassium chloride supporting electrolyte. The current was increased by more than tenfold, suggesting its potential to be used as a mercury(II) sensor

Palladium nanoparticles supported on fluorine-doped tin oxide as an efficient heterogeneous catalyst for Suzuki coupling and 4-nitrophenol reduction

Immobilization of palladium nanoparticles onto the fluorine-doped tin oxide (FTO) as support Pd/FTO, resulted in a highly active heterogeneous catalyst for Suzuki-Miyaura cross-coupling reactions and 4-nitrophenol reduction. The Pd/FTO catalyst has been synthesized by immobilization of palladium nanoparticles onto FTO via a simple impregnation method. ICP-MS analysis confirmed that there is 0.11 mmol/g of palladium was loaded successfully on FTO support. The crystallinity, morphologies, compositions and surface properties of Pd/FTO were fully characterized by various techniques. It was further examined for its catalytic activity and robustness in Suzuki coupling reaction with different aryl halides and solvents. The yields obtained from Suzuki coupling reactions were basically over 80%. The prepared catalyst was also tested on mild reaction such as reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). Pd/FTO catalyst exhibited high catalytic activity towards 4-NP reduction with a rate constant of 1.776 min(-1) and turnover frequency (TOF) value of 29.1 hr(-1). The findings revealed that Pd/FTO also maintained its high stability for five consecutive runs in Suzuki reactions and 4-NP reductions. The catalyst showed excellent catalytic activities by using a small amount of Pd/FTO for the Suzuki coupling reaction and 4-NP reduction

Autothermal reforming of palm empty fruit bunch bio-oil: thermodynamic modelling

This work focuses on thermodynamic analysis of the autothermal reforming of palm empty fruit bunch (PEFB) bio-oil for the production of hydrogen and syngas. PEFB bio-oil composition was simulated using bio-oil surrogates generated from a mixture of acetic acid, phenol, levoglucosan, palmitic acid and furfural. A sensitivity analysis revealed that the hydrogen and syngas yields were not sensitive to actual bio-oil composition, but were determined by a good match of molar elemental composition between real bio-oil and surrogate mixture. The maximum hydrogen yield obtained under constant reaction enthalpy and pressure was about 12 wt% at S/C = 1 and increased to about 18 wt% at S/C = 4; both yields occurring at equivalence ratio Φ of 0.31. The possibility of generating syngas with varying H2 and CO content using autothermal reforming was analysed and application of this process to fuel cells and Fischer-Tropsch synthesis is discussed. Using a novel simple modelling methodology, reaction mechanisms were proposed which were able to account for equilibrium product distribution. It was evident that different combinations of reactions could be used to obtain the same equilibrium product concentrations. One proposed reaction mechanism, referred to as the ‘partial oxidation based mechanism’ involved the partial oxidation reaction of the bio-oil to produce hydrogen, with the extent of steam reforming and water gas shift reactions varying depending on the amount of oxygen used. Another proposed mechanism, referred to as the ‘complete oxidation based mechanism’ was represented by thermal decomposition of about 30% of bio-oil and hydrogen production obtained by decomposition, steam reforming, water gas shift and carbon gasification reactions. The importance of these mechanisms in assisting in the eventual choice of catalyst to be used in a real ATR of PEFB bio-oil process was discussed

New silica supported HClO4 as efficient catalysts for estolide synthesis from oleic acid

The syntheses of estolides via condensation reaction of oleic acid were investigated using heterogenous catalysts. In this study HClO4 is supported onto suitable support to make it environmentally friendly. A series of solid acid catalyst containing 5-45 % of perchloric acid supported onto silica was synthesized and characterized using XRD, BET surface area measurement, TEM and XPS surface analysis. Silica modified with perchloric acid was found to be efficient and environmentally benign solid acid catalyst for estolide synthesis. The reaction was performed at 70 °C for 10 hours to give oleic-oleic monoestolide acid (m/z 563.51 as M-H)-. Based on the experimental findings above, optimum catalytic performance was with 15 % HClO4 loading onto SiO2 to give 98.98 % conversion of the oleic acid with 63.98 % oleic-oleic monoestolide acid selectivity