24 research outputs found
First application of mass measurement with the Rare-RI Ring reveals the solar r-process abundance trend at A=122 and A=123
The Rare-RI Ring (R3) is a recently commissioned cyclotron-like storage ring
mass spectrometer dedicated to mass measurements of exotic nuclei far from
stability at Radioactive Isotope Beam Factory (RIBF) in RIKEN. The first
application of mass measurement using the R3 mass spectrometer at RIBF is
reported. Rare isotopes produced at RIBF, Sn, In, Cd,
Ag, Pd, were injected in R3. Masses of In, Cd,
and Pd were measured whereby the mass uncertainty of Pd was
improved. This is the first reported measurement with a new storage ring mass
spectrometery technique realized at a heavy-ion cyclotron and employing
individual injection of the pre-identified rare nuclei. The latter is essential
for the future mass measurements of the rarest isotopes produced at RIBF. The
impact of the new Pd result on the solar -process abundances in a
neutron star merger event is investigated by performing reaction network
calculations of 20 trajectories with varying electron fraction . It is
found that the neutron capture cross section on Pd increases by a
factor of 2.2 and -delayed neutron emission probability,
, of Rh increases by 14\%. The neutron capture cross
section on Pd decreases by a factor of 2.6 leading to pileup of
material at , thus reproducing the trend of the solar -process
abundances. The trend of the two-neutron separation energies (S)
was investigated for the Pd isotopic chain. The new mass measurement with
improved uncertainty excludes large changes of the S value at
. Such large increase of the S values before was
proposed as an alternative to the quenching of the shell gap to
reproduce -process abundances in the mass region of
The effectiveness and safety of computed tomographic peritoneography and video-assisted thoracic surgery for hydrothorax in peritoneal dialysis patients: A retrospective cohort study in Japan.
IntroductionAlbeit uncommon, hydrothorax is an important complication of peritoneal dialysis (PD). Due to paucity of evidence for optimal treatment, this study aimed to evaluate the effectiveness and safety of computed tomographic (CT) peritoneography and surgical intervention involving video-assisted thoracic surgery (VATS) for hydrothorax in a retrospective cohort of patients who underwent PD in Japan.MethodsOf the 982 patients who underwent PD from six centers in Japan between 2007 and 2019, 25 (2.5%) with diagnosed hydrothorax were enrolled in this study. PD withdrawal rates were compared between patients who underwent VATS for diaphragm repair (surgical group) and those who did not (non-surgical group) using the Kaplan-Meier method and log-rank test.ResultsThe surgical and non-surgical groups comprised a total of 11 (44%) and 14 (56%) patients, respectively. Following hydrothorax diagnosis by thoracentesis and detection of penetrated sites on the diaphragm using CT peritoneography, VATS was performed at a median time of 31 days (interquartile range [IQR], 20-96 days). During follow-up (median, 26 months; IQR, 10-51 months), 9 (64.3%) and 2 (18.2%) patients in the non-surgical and surgical groups, respectively, withdrew from PD (P = 0.021). There were no surgery-related complications or hydrothorax relapse in the surgical group.ConclusionsThis study demonstrated the effectiveness and safety of CT peritoneography and VATS for hydrothorax. This approach may be useful in hydrothorax cases to avoid early drop out of PD and continue PD in the long term. Further studies are warranted to confirm these results
Development and operation of an electrostatic time-of-flight detector for the Rare RI storage Ring
An electrostatic time-of-flight detector named E-MCP has been developed for quick diagnostics of circulating beam and timing measurement in mass spectrometry at the Rare-RI Ring in RIKEN. The E-MCP detector consists of a conversion foil, potential grids, and a microchannel plate. Secondary electrons are released from the surface of the foil when a heavy ion hits it. The electrons are accelerated and deflected by 90◦toward the microchannel plate by electrostatic potentials. A thin carbon foil and a thin aluminum-coated mylar foil were used as conversion foils. We obtained time resolutions of 69(1) ps and 43(1) ps (standard deviation) for a84Krbeam at an energy of 170 MeV/u when using the carbon and the aluminum-coated mylar foils, respectively. A detection efficiency of approximately 90% was obtained for both foils. The E-MCP detector equipped with the carbon foil was installed inside the Rare-RI Ring to confirm particle circulation within a demonstration experiment on mass measurements of nuclei around 78Ge produced by in-flight fission of uranium beam at the RI Beam Factory in RIKEN. Periodic time signals from circulating ions were clearly observed. Revolution times for 78Ge, 77Ga, and 76Zn were obtained. The results confirmed successful circulation of the short-lived nuclei inside the Rare-RI Ring
Development and operation of an electrostatic time-of-flight detector for the Rare RI storage Ring
Performance of prototype Dual Gain Multilayer Thick GEM with high-intensity heavy-ion beam injections in low-pressure hydrogen gas
A prototype Dual Gain Multilayer Thick Gas Electron Multilyer (DG-M-THGEM)
with an active area of 10 cm 10 cm was manufactured aiming at the
production of a large-volume active-target time projection chamber which can
work under the condition of high-intensity heavy-ion beam injections. The
DG-M-THGEM has a alternating structure of electrodes and insulators. Effective
gas gains of two regions, which are called beam and recoil regions, are
separately controlled. Performance of the prototype DG-M-THGEM in hydrogen gas
at a pressure of 40 kPa was evaluated. Irradiating a Xe beam, an
effective gas gain lower than 100 with a charge resolution of 3% was achieved
in the beam region while the effective gas gain of 2000 was maintained in the
recoil region. Position distributions of measured charges along the beam axis
were investigated in order to evaluate gain uniformity in the high intensity
beam injection. The gain shift was estimated by simulations considering space
charges in the drift region. The gain shift was suppressed within 3% even at
the beam intensity of 2.5 10 particles per second.Comment: 19 pages, 14 figures, 3 table
Development and operation of an electrostatic time-of-flight detector for the Rare RI storage Ring
An electrostatic time-of-flight detector named E-MCP has been developed for quick diagnostics of circulating beam and timing measurement in mass spectrometry at the Rare-RI Ring in RIKEN. The E-MCP detector consists of a conversion foil, potential grids, and a microchannel plate. Secondary electrons are released from the surface of the foil when a heavy ion hits it. The electrons are accelerated and deflected by 90 toward the microchannel plate by electrostatic potentials. A thin carbon foil and a thin aluminum-coated mylar foil were used as conversion foils. We obtained time resolutions of 69(1) ps and 43(1) ps (standard deviation) for a Kr beam at an energy of 170 MeV/u when using the carbon and the aluminum-coated mylar foils, respectively. A detection efficiency of approximately 90% was obtained for both foils. The E-MCP detector equipped with the carbon foil was installed inside the Rare-RI Ring to confirm particle circulation within a demonstration experiment on mass measurements of nuclei around Ge produced by in-flight fission of uranium beam at the RI Beam Factory in RIKEN. Periodic time signals from circulating ions were clearly observed. Revolution times for Ge, Ga, and Zn were obtained. The results confirmed successful circulation of the short-lived nuclei inside the Rare-RI Ring