1,955 research outputs found
The effect of mycelial morphology on lycopene fermentaton
2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
Atropselective syntheses of (-) and (+) rugulotrosin A utilizing point-to-axial chirality transfer
Chiral, dimeric natural products containing complex structures and interesting biological properties have inspired chemists and biologists for decades. A seven-step total synthesis of the axially chiral, dimeric tetrahydroxanthone natural product rugulotrosin A is described. The synthesis employs a one-pot Suzuki coupling/dimerization to generate the requisite 2,2'-biaryl linkage. Highly selective point-to-axial chirality transfer was achieved using palladium catalysis with achiral phosphine ligands. Single X-ray crystal diffraction data were obtained to confirm both the atropisomeric configuration and absolute stereochemistry of rugulotrosin A. Computational studies are described to rationalize the atropselectivity observed in the key dimerization step. Comparison of the crude fungal extract with synthetic rugulotrosin A and its atropisomer verified that nature generates a single atropisomer of the natural product.P50 GM067041 - NIGMS NIH HHS; R01 GM099920 - NIGMS NIH HHS; GM-067041 - NIGMS NIH HHS; GM-099920 - NIGMS NIH HH
Social Determinants of Community Health Services Utilization among the Users in China: A 4-Year Cross-Sectional Study
Background To identify social factors determining the frequency of community health service (CHS) utilization among CHS users in China. Methods Nationwide cross-sectional surveys were conducted in 2008, 2009, 2010, and 2011. A total of 86,116 CHS visitors selected from 35 cities were interviewed. Descriptive analysis and multinomial logistic regression analysis were employed to analyze characteristics of CHS users, frequency of CHS utilization, and the socio-demographic and socio-economic factors influencing frequency of CHS utilization. Results Female and senior CHS clients were more likely to make 3–5 and ≥6 CHS visits (as opposed to 1–2 visits) than male and young clients, respectively. CHS clients with higher education were less frequent users than individuals with primary education or less in 2008 and 2009; in later surveys, CHS clients with higher education were the more frequent users. The association between frequent CHS visits and family income has changed significantly between 2008 and 2011. In 2011, income status did not have a discernible effect on the likelihood of making ≥6 CHS visits, and it only had a slight effect on making 3–5 CHS visits. Conclusion CHS may play an important role in providing primary health care to meet the demands of vulnerable populations in China. Over time, individuals with higher education are increasingly likely to make frequent CHS visits than individuals with primary school education or below. The gap in frequency of CHS utilization among different economic income groups decreased from 2008 to 2011
Characteristics of a tropospheric ozone profile and implications for the origin of ozone over subtropical China in the spring of 2001
Author name used in this publication: Y. S. Li2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
Risk Factors For Recurrent Stroke After Coronary Artery Bypass Grafting
<p>Abstract</p> <p>Objectives</p> <p>Preventing stroke after coronary artery bypass grafting (CABG) remains a therapeutic goal, due in part to the lack of identifiable risk factors. The aim of this study, accordingly, was to identify risk factors in CABG patients with a previous history of stroke.</p> <p>Methods</p> <p>Patients with a history of stroke who underwent CABG at Beijing An Zhen hospital from January 2007 to July 2010 were selected (n = 430), and divided into two groups according to the occurrence of postoperative stroke. Pre-operative and post-operative data were retrospectively collected and analyzed by univariate and multivariate logistic regression analyses.</p> <p>Results</p> <p>Thirty-two patients (7.4%) suffered post-operative stroke. Univariate analysis identified several statistically significant risk factors in the post-operative stroke group, including pre-surgical left ventricular ejection fractions (LVEF) ≤50%, on-pump surgery, post-operative atrial fibrillation (AF), and hypotension. Multivariable analysis identified 4 independent risk factors for recurrent stroke: unstable angina (odds ratio (OR) = 2.95, 95% CI: 1.05-8.28), LVEF ≤50% (OR = 2.77, 95% CI: 1.23-6.27), AF (OR = 4.69, 95% CI: 1.89-11.63), and hypotension (OR = 2.55, 95% CI: 1.07-6.04).</p> <p>Conclusion</p> <p>Unstable angina, LVEF ≤50%, post-operative AF, and post-operative hypotension are independent risk factors of recurrent stroke in CABG patients with a previous history of stroke.</p
Room temperature texturing of austenite/ferrite steel by electropulsing
The work reports an experimental observation on crystal rotation in a duplex (austenite + ferrite) steel induced by the electropulsing treatment at ambient temperature, while the temperature rising due to ohmic heating in the treatment was negligible. The results demonstrate that electric current pulses are able to dissolve the initial material’s texture that has been formed in prior thermomechanical processing and to produce an alternative texture. The results were explained in terms of the instability of an interface under perturbation during pulsed electromigation
The Role of Lactic Acid Adsorption by Ion Exchange Chromatography
Background: The polyacrylic resin Amberlite IRA-67 is a promising adsorbent for lactic acid extraction from aqueous solution, but little systematic research has been devoted to the separation efficiency of lactic acid under different operating conditions. Methodology/Principal Findings: In this paper, we investigated the effects of temperature, resin dose and lactic acid loading concentration on the adsorption of lactic acid by Amberlite IRA-67 in batch kinetic experiments. The obtained kinetic data followed the pseudo-second order model well and both the equilibrium and ultimate adsorption slightly decreased with the increase of the temperature at 293–323K and 42.5 g/liter lactic acid loading concentration. The adsorption was a chemically heterogeneous process with a mean free energy value of 12.18 kJ/mol. According to the Boyd _ plot, the lactic acid uptake process was primarily found to be an intraparticle diffusion at a lower concentration (,50 g/liter) but a film diffusion at a higher concentration (.70 g/liter). The values of effective diffusion coefficient D i increased with temperature. By using our Equation (21), the negative values of DGu and DHu revealed that the adsorption process was spontaneous and exothermic. Moreover, the negative value of DSu reflected the decrease of solid-liquid interface randomness at the solid-liquid interface when adsorbing lactic acid on IRA-67. Conclusions/Significance: With the weakly basic resin IRA-67, in situ product removal of lactic acid can be accomplishe
A comparison of wear behaviour of heat resistant steel engine valves and TiAl engine valves
The increasingly demand for higher performance internal combustion engines (ICEs) has led to higher temperatures in the combustion chamber. As a result, TiAl valves have been investigated with a view to their use in a natural gas fuelled diesel ICE, taking advantage of their low density and good high temperature resistance. In this work, comparison bench tests for traditional steel valves and TiAl valves were carried out through the use of specially designed wear testing apparatus. Compared to the traditional valves made from heat resistant steel (X60, X85), the TiAl valves have 50 % lower mass, leading to a decrease in the impact seating forces during the engine operation. With the reduction of the inertia of engine valve movement, the dynamic characteristics of the engine valve train system can be optimized. Each contact pair of valve and seat insert was tested for 3 million impact cycles. Compared to the austenitic exhaust valves (X60) tested at 700 °C, the TiAl valve had better wear resistance and the wear loss decreased by 24.8 %. The predominant wear mechanism is considered to be a combination of oxidative wear and adhesive wear. However, for the intake valves tested at 400 °C, the wear loss of the TiAl valve was three times higher than the martensitic intake valves (X85). The predominant wear mechanism can be identified as abrasive wear and adhesive wear. It is therefore concluded that the TiAl exhaust valve is a potential solution for a natural gas fuelled diesel
Hypoxia inducible factor 1α gene (HIF-1α) splice variants: potential prognostic biomarkers in breast cancer
<p>Abstract</p> <p>Background</p> <p>Hypoxia-inducible factor 1 (HIF-1) is a master transcriptional regulator of genes regulating oxygen homeostasis. The HIF-1 protein is composed of two HIF-1α and HIF-1β/aryl hydrocarbon receptor nuclear translocator (ARNT) subunits. The prognostic relevance of HIF-1α protein overexpression has been shown in breast cancer. The impact of HIF-1α alternative splice variant expression on breast cancer prognosis in terms of metastasis risk is not well known.</p> <p>Methods</p> <p>Using real-time quantitative reverse transcription PCR assays, we measured mRNA concentrations of total <it>HIF-1α </it>and 4 variants in breast tissue specimens in a series of 29 normal tissues or benign lesions (normal/benign) and 53 primary carcinomas. In breast cancers <it>HIF-1α </it>splice variant levels were compared to clinicopathological parameters including tumour microvessel density and metastasis-free survival.</p> <p>Results</p> <p><it>HIF-1α </it>isoforms containing a three base pairs TAG insertion between exon 1 and exon 2 (designated <it>HIF-1α</it><sup><it>TAG</it></sup>) and <it>HIF-1α</it><sup><it>736 </it></sup>mRNAs were found expressed at higher levels in oestrogen receptor (OR)-negative carcinomas compared to normal/benign tissues (<it>P </it>= 0.009 and <it>P </it>= 0.004 respectively). In breast carcinoma specimens, lymph node status was significantly associated with <it>HIF-1α</it><sup><it>TAG </it></sup>mRNA levels (<it>P </it>= 0.037). Significant statistical association was found between tumour grade and <it>HIF-1α</it><sup><it>TAG </it></sup>(<it>P </it>= 0.048), and total <it>HIF-1α </it>(<it>P </it>= 0.048) mRNA levels. <it>HIF-1α</it><sup><it>TAG </it></sup>mRNA levels were also inversely correlated with both oestrogen and progesterone receptor status (<it>P </it>= 0.005 and <it>P </it>= 0.033 respectively). Univariate analysis showed that high <it>HIF-1α</it><sup><it>TAG </it></sup>mRNA levels correlated with shortened metastasis free survival (<it>P </it>= 0.01).</p> <p>Conclusions</p> <p>Our results show for the first time that mRNA expression of a <it>HIF-1α</it><sup><it>TAG </it></sup>splice variant reflects a stage of breast cancer progression and is associated with a worse prognosis.</p> <p>See commentary: <url>http://www.biomedcentral.com/1741-7015/8/45</url></p
Probing Specific Interaction Forces Between Human IgG and Rat Anti-Human IgG by Self-Assembled Monolayer and Atomic Force Microscopy
Interaction forces between biological molecules such as antigen and antibody play important roles in many biological processes, but probing these forces remains technically challenging. Here, we investigated the specific interaction and unbinding forces between human IgG and rat anti-human IgG using self assembled monolayer (SAM) method for sample preparation and atomic force microscopy (AFM) for interaction force measurement. The specific interaction force between human IgG and rat anti-human IgG was found to be 0.6–1.0 nN, and the force required for unbinding a single pair of human IgG and rat anti-human IgG was calculated to be 144 ± 11 pN. The results are consistent with those reported in the literatures. Therefore, SAM for sample preparation combined with AFM for interaction measurement is a relatively simple, sensitive and reliable technique to probe specific interactions between biological molecules such as antigen and antibody
- …