249 research outputs found

    Nitrogen fluorescence in air for observing extensive air showers

    Full text link
    Extensive air showers initiate the fluorescence emissions from nitrogen molecules in air. The UV-light is emitted isotropically and can be used for observing the longitudinal development of extensive air showers in the atmosphere over tenth of kilometers. This measurement technique is well-established since it is exploited for many decades by several cosmic ray experiments. However, a fundamental aspect of the air shower analyses is the description of the fluorescence emission in dependence on varying atmospheric conditions. Different fluorescence yields affect directly the energy scaling of air shower reconstruction. In order to explore the various details of the nitrogen fluorescence emission in air, a few experimental groups have been performing dedicated measurements over the last decade. Most of the measurements are now finished. These experimental groups have been discussing their techniques and results in a series of Air Fluorescence Workshops commenced in 2002. At the 8th^{\rm{th}} Air Fluorescence Workshop 2011, it was suggested to develop a common way of describing the nitrogen fluorescence for application to air shower observations. Here, first analyses for a common treatment of the major dependences of the emission procedure are presented. Aspects like the contributions at different wavelengths, the dependence on pressure as it is decreasing with increasing altitude in the atmosphere, the temperature dependence, in particular that of the collisional cross sections between molecules involved, and the collisional de-excitation by water vapor are discussed.Comment: 12 pages, 17 figures, 2 tables, International Symposium on Future Directions in UHECR Physics, 13-16 February 2012, CERN, Geneva (Switzerland); the updated version corrects for a typo in Eq. (1

    Report of the Working Group on the Composition of Ultra High Energy Cosmic Rays

    Full text link
    For the first time a proper comparison of the average depth of shower maximum (XmaxX_{\rm max}) published by the Pierre Auger and Telescope Array Observatories is presented. The XmaxX_{\rm max} distributions measured by the Pierre Auger Observatory were fit using simulated events initiated by four primaries (proton, helium, nitrogen and iron). The primary abundances which best describe the Auger data were simulated through the Telescope Array (TA) Middle Drum (MD) fluorescence and surface detector array. The simulated events were analyzed by the TA Collaboration using the same procedure as applied to their data. The result is a simulated version of the Auger data as it would be observed by TA. This analysis allows a direct comparison of the evolution of ⟨Xmax⟩\langle X_{\rm max} \rangle with energy of both data sets. The ⟨Xmax⟩\langle X_{\rm max} \rangle measured by TA-MD is consistent with a preliminary simulation of the Auger data through the TA detector and the average difference between the two data sets was found to be (2.9±2.7  (stat.)±18  (syst.)) g/cm2(2.9 \pm 2.7\;(\text{stat.}) \pm 18\;(\text{syst.}))~\text{g/cm}^2.Comment: To appear in the Proceedings of the UHECR workshop, Springdale USA, 201

    Effect of energy deposited by cosmic-ray particles on interferometric gravitational wave detectors

    Get PDF
    We investigated the noise of interferometric gravitational wave detectors due to heat energy deposited by cosmic-ray particles. We derived a general formula that describes the response of a mirror against a cosmic-ray passage. We found that there are differences in the comic-ray responses (the dependence of temperature and cosmic-ray track position) in cases of interferometric and resonant gravitational wave detectors. The power spectral density of vibrations caused by low-energy secondary muons is 100 times smaller than the goal sensitivity of future second-generation interferometer projects, such as LCGT and Advanced LIGO. The arrival frequency of high-energy cosmic-ray muons that generate enough large showers inside mirrors of LCGT and Advanced LIGO is one per a millennium. We also discuss the probability of exotic-particle detection with interferometers

    Galactic-disk enhancement of cosmic rays at E > 1012eV

    Get PDF
    We observed an enhancement of cosmic rays from the Vela region with SAS array at Mt. Chacaltaya in Bolivia. It is not possible to conclude that this enhancement is caused by primary gamma-rays, since the observed events not limited with the less muons in the air showers show the same enhancement. In order to confirm this result with improved statistics and to investigate the energy dependence of this enhancement, we have installed a new array, called MAS array. All the data with much higher statistics show the enhancement along the Whole galactic disk

    Measurement of cosmic ray chemical composition at Mt. Chacaltaya

    Get PDF
    BASJE grouphas measured the chemical composition of primary cosmic rays with energies around the “knee” with several methods. These measurements show that the averaged mass number of cosmic ray particles increases with energy upto the knee. In order to measure the chemical composition in much wider energy range, we have started a new experiment at Mt. Chacaltaya in 2000

    Present experiment of BASJE group at Mt. Chacaltaya

    Get PDF
    A compact air shower array to observe primary cosmic rays above a few TeV has been installed at Mt. Chacaltaya in Bolivia since 1996. This array is available to observe the air showers above 6 TeV and the longitudinal development curves above 50 TeV. The purpose of the observations is to study the chemical composition and the energy spectrum of cosmic rays in the energy region including the “knee” of the energy spectrum. First, the consistency between direct measurements (balloon-borne experiments) and air shower observations in the energy region from 50 TeV to 80 TeV is examined and confirmed. Next, the chemical composition and the energy spectrum are derived from the air shower observations. In the study, the longitudinal developments of shower particles are calculated by Monte Carlo simulations, assuming different chemical compositions above 80 TeV. The characteristics of the present air shower array and the comparison of the preliminary observed results with that of the simulations are presented

    On-orbit Operations and Offline Data Processing of CALET onboard the ISS

    Get PDF
    The CALorimetric Electron Telescope (CALET), launched for installation on the International Space Station (ISS) in August, 2015, has been accumulating scientific data since October, 2015. CALET is intended to perform long-duration observations of high-energy cosmic rays onboard the ISS. CALET directly measures the cosmic-ray electron spectrum in the energy range of 1 GeV to 20 TeV with a 2% energy resolution above 30 GeV. In addition, the instrument can measure the spectrum of gamma rays well into the TeV range, and the spectra of protons and nuclei up to a PeV. In order to operate the CALET onboard ISS, JAXA Ground Support Equipment (JAXA-GSE) and the Waseda CALET Operations Center (WCOC) have been established. Scientific operations using CALET are planned at WCOC, taking into account orbital variations of geomagnetic rigidity cutoff. Scheduled command sequences are used to control the CALET observation modes on orbit. Calibration data acquisition by, for example, recording pedestal and penetrating particle events, a low-energy electron trigger mode operating at high geomagnetic latitude, a low-energy gamma-ray trigger mode operating at low geomagnetic latitude, and an ultra heavy trigger mode, are scheduled around the ISS orbit while maintaining maximum exposure to high-energy electrons and other high-energy shower events by always having the high-energy trigger mode active. The WCOC also prepares and distributes CALET flight data to collaborators in Italy and the United States. As of August 31, 2017, the total observation time is 689 days with a live time fraction of the total time of approximately 84%. Nearly 450 million events are collected with a high-energy (E>10 GeV) trigger. By combining all operation modes with the excellent-quality on-orbit data collected thus far, it is expected that a five-year observation period will provide a wealth of new and interesting results.Comment: 11 pages, 7 figures, published online 27 February 201
    • …
    corecore