Candida and invasive candidiasis: Back to basics.

The ubiquitous Candida spp. is an opportunistic fungal pathogen which, despite treatment with antifungal drugs, can cause fatal bloodstream infections (BSIs) in immunocompromised and immunodeficient persons. Thus far, several major C. albicans virulence factors have been relatively well studied, including morphology switching and secreted degradative enzymes. However, the exact mechanism of Candida pathogenesis and the host response to invasion are still not well elucidated. The relatively recent discovery of the quorum-sensing molecule farnesol and the existence of quorum sensing as a basic regulatory phenomenon of the C. albicans population behavior has revolutionized Candida research. Through population density regulation, the quorum-sensing mechanism also controls the cellular morphology of a C. albicans population in response to environmental factors, thereby, effectively placing morphology switching downstream of quorum sensing. Thus, the quorum-sensing phenomenon has been hailed as the 'missing piece' of the pathogenicity puzzle. Here, we review what is known about Candida spp. as the etiological agents of invasive candidiasis and address our current understanding of the quorum-sensing phenomenon in relation to virulence in the host

Promising thermoelectric performance in van der Waals layered SnSe2

SnSe as a lead-free IV–VI semiconductor, has attracted intensive attention for its potential thermoelectric applications, since it is less toxic and much cheaper than conventional PbTe and PbSe thermoelectrics. Here we focus on its sister layered compound SnSe2 in n-type showing a thermoelectric performance to be similarly promising as SnSe in the polycrystalline form. This is enabled by its favorable electronic structure according to first principle calculations, its capability to be effectively doped by bromine on selenium site to optimize the carrier concentration, as well as its intrinsic lattice thermal conductivity as low as 0.4 W/m-K due to the weak van der Waals force between layers. The broad carrier concentration ranging from 0.5 to 6 × 1019 cm−3 realized in this work, further leads to a fundamental understanding on the material parameters determining the thermoelectric transport properties, based on a single parabolic band (SPB) model with acoustic scattering. The layered crystal structure leads to a texture in hot-pressed polycrystalline materials and therefore anisotropic transport properties, which can be well understood by the SPB model. This work not only demonstrates SnSe2 as a promising thermoelectric material but also guides the further improvements particularly by band engineering and texturing approaches

Litter decomposition in a subtropical plantation in Qianyanzhou, China

A long-term (20 months) bulk litter decomposition experiment was conducted in a subtropical plantation in southern China in order to test the hypothesis that stable isotope discrimination occurs during litter decomposition and that litter decomposition increases concentrations of nutrients and organic matter in soil. This was achieved by a litter bag technique. Carbon (C), nitrogen (N) and phosphorus (P) concentrations in the remaining litter as well as delta(13)C and delta(15)N during the experimental period were measured. Meanwhile, organic C, alkali-soluble N and available P concentrations were determined in the soils beneath litter bags and in the soils at the control plots. The dry mass remaining (as % of the initial mass) during litter decomposition exponentially declined (y = 0.9362 e(-0.0365x) , R (2) = 0.93, P < 0.0001), but total C in the remaining litter did not decrease significantly with decomposition process during a 20-month period. By comparison, total N in the remaining litter significantly increased from 5.8 +/- A 1.7 g kg(-1) dw litter in the first month to 10.1 +/- A 1.4 g kg(-1) dw litter in the 20th month. During the decomposition, delta(13)C values of the remaining litter showed an insignificant enrichment, while delta(15)N signatures exhibited a different pattern. It significantly depleted (15)N (y = -0.66x + 0.82, R (2) = 0.57, P < 0.0001) during the initial 7 months while showing (15)N enrichments in the remaining 13 months (y = 0.10x - 4.23, R (2) = 0.32, P < 0.0001). Statistically, litter decomposition has little impact on concentrations of soil organic C and alkali-soluble N and available P in the top soil. This indicates that nutrient return to the topsoil through litter decomposition is limited and that C cycling decoupled from N cycling during decomposition in this subtropical plantation in southern China

Higher Order Acoustoelastic Lamb Wave Propagation in Stressed Plates

Residual stresses can be generated during fabrication processes, such as, welding, forging, rolling etc[1-3] . They have obvious influence on the performance of the material, like cracking and corrosion. To better control residual stresses, the initial distribution of them in materials must be clear. Ultrasonic methods can be used as a good tool for residual stress detection, and this approach is non-destructive and costs are modest. Methods which utilize longitudinal critically refracted (LCR) waves are receiving increased attention and it can be used on thick material. However, there have only been a limited number of studies which consider the acoustoelastic effect for thin plate materials which generate Lamb waves[4] . This paper reports a study in which a numerical model[5-6] is used to investigate the Lamb wave dispersion curves under loading that induce stresses. The effects of stress on various Lamb modes are discussed and those which appear to be most sensitive are identified. It is found that when the stress’s direction is the same with wave propagation direction in a 1 mm thick aluminum plate the A0 mode is the most sensitive to the applied stress

Low-Symmetry Rhombohedral GeTe Thermoelectrics

High-symmetry thermoelectric materials usually have the advantage of very high band degeneracy, while low-symmetry thermoelectrics have the advantage of very low lattice thermal conductivity. If the symmetry breaking of band degeneracy is small, both effects may be realized simultaneously. Here we demonstrate this principle in rhombohedral GeTe alloys, having a slightly reduced symmetry from its cubic structure, to realize a record figure of merit (zT ∼ 2.4) at 600 K. This is enabled by the control of rhombohedral distortion in crystal structure for engineering the split low-symmetry bands to be converged and the resultant compositional complexity for simultaneously reducing the lattice thermal conductivity. Device ZT as high as 1.3 in the rhombohedral phase and 1.5 over the entire working temperature range of GeTe alloys make this material the most efficient thermoelectric to date. This work paves the way for exploring low-symmetry materials as efficient thermoelectrics. Thermoelectric materials enable a heat flow to be directly converted to a flow of charge carriers for generating electricity. The crystal structure symmetry is one of the most fundamental parameters determining the properties of a crystalline material including thermoelectrics. The common belief currently held is that high-symmetry materials are usually good for thermoelectrics, leading to great efforts having historically been focused on GeTe alloys in a high-symmetry cubic structure. Here we show a slight reduction of crystal structure symmetry of GeTe alloys from cubic to rhombohedral, enabling a rearrangement in electronic bands for more transporting channels of charge carriers and many imperfections for more blocking centers of heat-energy carriers (phonons). This leads to the discovery of rhombohedral GeTe alloys as the most efficient thermoelectric materials to date, opening new possibilities for low-symmetry thermoelectric materials. Cubic GeTe thermoelectrics have been historically focused on, while this work utilizes a slight symmetry-breaking strategy to converge the split valence bands, to reduce the lattice thermal conductivity and therefore realize a record thermoelectric performance, all enabled in GeTe in a rhombohedral structure. This not only promotes GeTe alloys as excellent materials for thermoelectric power generation below 800 K, but also expands low-symmetry materials as efficient thermoelectrics

A unified approach to combinatorial key predistribution schemes for sensor networks

There have been numerous recent proposals for key predistribution schemes for wireless sensor networks based on various types of combinatorial structures such as designs and codes. Many of these schemes have very similar properties and are analysed in a similar manner. We seek to provide a unified framework to study these kinds of schemes. To do so, we define a new, general class of designs, termed “partially balanced t-designs”, that is sufficiently general that it encompasses almost all of the designs that have been proposed for combinatorial key predistribution schemes. However, this new class of designs still has sufficient structure that we are able to derive general formulas for the metrics of the resulting key predistribution schemes. These metrics can be evaluated for a particular scheme simply by substituting appropriate parameters of the underlying combinatorial structure into our general formulas. We also compare various classes of schemes based on different designs, and point out that some existing proposed schemes are in fact identical, even though their descriptions may seem different. We believe that our general framework should facilitate the analysis of proposals for combinatorial key predistribution schemes and their comparison with existing schemes, and also allow researchers to easily evaluate which scheme or schemes present the best combination of performance metrics for a given application scenario

The Expression and Roles of Nde1 and Ndel1 in the Adult Mammalian Central Nervous System

Open Access funded by Wellcome Trust Under a Creative Commons license Acknowledgments We thank Prof Angelo Sementilli, Department of Pathology, Universidade Metropolitana de Santos, SP, Brazil, for the human sample collection. This study is funded by Scottish Universities Life Sciences Alliance (HR07019 to S. Shen and C.D. McCaig), Medical Research Scotland (384 FRG to B. Lang, United Kingdom), Tenovus Scotland (G12/25 to B. Lang), Sino-UK Higher Education Research Partnership for PhD Studies (C.D. McCaig and Y.Q. Ding) and Wellcome Trust (WT081633MA-NCE to P.J.A. McCaffery, United Kingdom).Peer reviewedPublisher PD

Photon generation by laser-Compton scattering at the KEK-ATF

We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colliding them with the 1.3 GeV electron beam in the ATF ring while maintaining the laser pulse accumulation in the cavity. As a result, we observed 26.0 +/- 0.1 photons per electron-laser pulse crossing, which corresponds to a yield of 10^8 photons in a second.Comment: 3 pages, 5 figures, Preprint submitted to TIPP09 Proceedings in NIM

Making On-Demand Routing Efficient with Route-Request Aggregation

In theory, on-demand routing is very attractive for mobile ad hoc networks (MANET), because it induces signaling only for those destinations for which there is data traffic. However, in practice, the signaling overhead of existing on-demand routing protocols becomes excessive as the rate of topology changes increases due to mobility or other causes. We introduce the first on-demand routing approach that eliminates the main limitation of on-demand routing by aggregating route requests (RREQ) for the same destinations. The approach can be applied to any existing on-demand routing protocol, and we introduce the Ad-hoc Demand-Aggregated Routing with Adaptation (ADARA) as an example of how RREQ aggregation can be used. ADARA is compared to AODV and OLSR using discrete-event simulations, and the results show that aggregating RREQs can make on-demand routing more efficient than existing proactive or on-demand routing protocols