Linear sampling method for identifying cavities in a heat conductor

We consider an inverse problem of identifying the unknown cavities in a heat conductor. Using the Neumann-to-Dirichlet map as an input data, we develop a linear sampling type method for the heat equation. A new feature is that there is a freedom to choose the time variable, which suggests that we have more data than the linear sampling methods for the inverse boundary value problem associated with EIT and inverse scattering problem with near field data

Radiating and non-radiating sources in elasticity

In this work, we study the inverse source problem of a fixed frequency for the Navier's equation. We investigate that nonradiating external forces. If the support of such a force has a convex or non-convex corner or edge on their boundary, the force must be vanishing there. The vanishing property at corners and edges holds also for sufficiently smooth transmission eigenfunctions in elasticity. The idea originates from the enclosure method: The energy identity and new type exponential solutions for the Navier's equation.Comment: 17 page

Reconstruction of Inclusions for the Inverse Boundary Value Problem with Mixed Type Boundary Condition

We consider an inverse boundary value problem for identifying the inclusion inside a known anisotropic conductive medium. We give a reconstruction procedure for identifying the in­clusion from the Dirichlet-Neumann map or the Neumann-Dirichlet map associated with the mixed type boundary condition

Initial structure development in the CO2 laser-heated drawing of poly(trimethylene terephthalate) fiber

Because rapid and uniform laser heating can fix the neck-drawing point in continuous drawing of PTT fiber, we have successfully analyzed the fiber structure development in the continuous drawing process by in-situ measurement with a time resolution of less than 1 ms. In this study, we investigated fiber structure development for PTT around the neck point controlled with a CO2 laser-heated apparatus during continuous drawing, through on-line measurements of WAXD, SAXS, and fiber temperature. Fiber temperature attained by laser radiation initiated a rise around −3 mm in relation to the neck point at 0 mm, and increased to about 90 °C, which is past the 45 °C Tg for PTT. The instantaneous increase in fiber temperature continued with a vertical ascent, with plastic deformation around the neck point. The crystalline diffraction pattern was revealed initially at the elapsed time of 0.415 ms immediately after necking, and remained fairly constant with elapsed time. The ultimate crystalline diffraction pattern for a completely drawn fiber showed little difference from that at the initial stage. In PET a two-dimensionally ordered structure in the form of a mesophase was detected immediately after the necking, whereas in PTT the phenomenon was not observed. With elapsed time, the d spacing of (002) plane decreased gradually due to transformation of the initial all-trans conformation into trans-gauche-gauche-trans conformation, and ultimately the PTT molecular chain could favorably adopt the trans-gauche-gauche-trans conformation. SAXS pattern immediately after the necking revealed an X-shape; the scattering intensity concentrated on meridian directions due to individual crystal development, and at 2 ms two-pointed scattering started to appear. Past 8 ms, the typical two-pointed scattering pattern was prominent and its intensity increased with elapsed time. Long period decreased with increasing elapsed time, but the crystallite size of meridian (002) plane hardly changed. The decrease in long period might be caused by chain relaxation in the amorphous region.ArticlePolymer. 49(26):5705-5713 (2008)journal articl

JAXA EARTH OBSERVATION DASHBOARD WITH COG AND WMS/WMTSS

JAXA has developed and implemented earth observation (EO) dashboard jointly with ESA and NASA. The development of the JAXA dashboard, along with the "Earth-graphy" website and the newly developed "JAXA Earth API" service, demonstrate JAXA's commitment to providing climate change and earth science information to users worldwide. The EO dashboard serves as a platform to deliver valuable data and information related to climate change. The WMS/WMTS technology allows users to visualize and interact with geospatial information by providing web-based mapping services. This technology enhances the user experience by enabling the display of satellite imagery, overlays, and other geospatial data layers within the EO dashboard. To further facilitate the efficient use of satellite data, JAXA has developed the JAXA Earth API service. This service offers a user-friendly interface for accessing and utilizing JAXA's Earth observation satellite image data. By providing an easy-to-use format, JAXA aims to promote the effective utilization of satellite data and encourage its widespread use. Overall, the development and operation of the JAXA dashboard, with its integration of COG format data, WMS/WMTS technology, Python-based API. This paper introduces the status of development of JAXA Earth Observation dashboard with COG format data, WMS/WMTS technology, phyton based API and JAXA Earth Observation missions

Initial structure development in the CO2 laser-heated drawing of poly(trimethylene terephthalate) fiber

Because rapid and uniform laser heating can fix the neck-drawing point in continuous drawing of PTT fiber, we have successfully analyzed the fiber structure development in the continuous drawing process by in-situ measurement with a time resolution of less than 1 ms. In this study, we investigated fiber structure development for PTT around the neck point controlled with a CO2 laser-heated apparatus during continuous drawing, through on-line measurements of WAXD, SAXS, and fiber temperature. Fiber temperature attained by laser radiation initiated a rise around −3 mm in relation to the neck point at 0 mm, and increased to about 90 °C, which is past the 45 °C Tg for PTT. The instantaneous increase in fiber temperature continued with a vertical ascent, with plastic deformation around the neck point. The crystalline diffraction pattern was revealed initially at the elapsed time of 0.415 ms immediately after necking, and remained fairly constant with elapsed time. The ultimate crystalline diffraction pattern for a completely drawn fiber showed little difference from that at the initial stage. In PET a two-dimensionally ordered structure in the form of a mesophase was detected immediately after the necking, whereas in PTT the phenomenon was not observed. With elapsed time, the d spacing of (002) plane decreased gradually due to transformation of the initial all-trans conformation into trans-gauche-gauche-trans conformation, and ultimately the PTT molecular chain could favorably adopt the trans-gauche-gauche-trans conformation. SAXS pattern immediately after the necking revealed an X-shape; the scattering intensity concentrated on meridian directions due to individual crystal development, and at 2 ms two-pointed scattering started to appear. Past 8 ms, the typical two-pointed scattering pattern was prominent and its intensity increased with elapsed time. Long period decreased with increasing elapsed time, but the crystallite size of meridian (002) plane hardly changed. The decrease in long period might be caused by chain relaxation in the amorphous region

Polarimetric Multi-View Inverse Rendering

A polarization camera has great potential for 3D reconstruction since the angle of polarization (AoP) of reflected light is related to an object's surface normal. In this paper, we propose a novel 3D reconstruction method called Polarimetric Multi-View Inverse Rendering (Polarimetric MVIR) that effectively exploits geometric, photometric, and polarimetric cues extracted from input multi-view color polarization images. We first estimate camera poses and an initial 3D model by geometric reconstruction with a standard structure-from-motion and multi-view stereo pipeline. We then refine the initial model by optimizing photometric and polarimetric rendering errors using multi-view RGB and AoP images, where we propose a novel polarimetric rendering cost function that enables us to effectively constrain each estimated surface vertex's normal while considering four possible ambiguous azimuth angles revealed from the AoP measurement. Experimental results using both synthetic and real data demonstrate that our Polarimetric MVIR can reconstruct a detailed 3D shape without assuming a specific polarized reflection depending on the material.Comment: Paper accepted in ECCV 202

Chlamydia trachomatis infection in early neonatal period

BACKGROUND: The clinical characteristics of Chlamydia trachomatis respiratory tract infections in Japanese neonates were investigated. METHODS: Clinical, laboratory and microbiological characteristics of five infants with pneumonia due to C. trachomatis in early neonatal period were analyzed. RESULTS: Only C. trachomatis was identified in 4 infants. Both C. trachomatis and cytomegalovirus was identified in one. Wheezing, tachypnea and cyanosis were common in infants. Mothers of five infants had negative chlamydial EIAs at 20 weeks of gestation. CONCLUSIONS: We identified five cases of C. trachomatis respiratory tract infections in early neonatal period with the possibility of intrauterine infection. Targeted screening, early diagnosis, and effective treatment of perinatal and neonatal chlamydial infections seems to be necessar

Genes Involved in the Metabolism of Poly-Unsaturated Fatty-Acids (PUFA) and Risk for Crohn's Disease in Children & Young Adults

Epidemiological evidence for the role of polyunsaturated fatty-acids (PUFA) in Crohn's disease (CD) is unclear, although the key metabolite leucotriene B4 (LTB(4)) is closely linked to the inflammatory process. We hypothesized that inherited variation in key PUFA metabolic enzymes may modify susceptibility for CD.A case-control design was implemented at three pediatric gastroenterology clinics in Canada. Children ≤20 yrs diagnosed with CD and controls were recruited. 19 single nucleotide polymorphisms (SNPs) across the ALOX5 (4) CYP4F3 (5) and CYP4F2 (10) genes, were genotyped. Associations between SNPs/haplotypes and CD were examined. A total of 431 cases and 507 controls were studied. The mean (±SD) age of the cases was 12.4 (±3.3) years. Most cases were male (56.4%), had ileo-colonic disease (L3±L4, 52.7%) and inflammatory behavior (B1±p, 87%) at diagnosis. One genotyped CYP4F3 SNP (rs2683037) not in Hardy-Weinberg Equilibrium was excluded. No associations with the remaining 4 CYP4F3 SNPs with CD were evident. However haplotype analysis revealed associations with a two-marker haplotype (TG) (rs3794987 & rs1290617) (p = 0.02; permuted p = 0.08). CYP4F2 SNPs, rs3093158 (OR (recessive) = 0.56, 95% CI = 0.35-0.89; p = 0.01), rs2074902 (OR (trend) = 1.26, 95% CI = 1.00-1.60; p = 0.05), and rs2108622 (OR (recessive) = 1.6, 95% CI = 1.00-2.57; p = 0.05) were significantly associated whereas rs1272 (OR (recessive) = 0.58, 95% CI = 0.30-1.13; p = 0.10) showed suggestions for associations with CD. A haplotype comprising these 4 SNPs was significantly associated (p = 0.007, permuted p = 0.02) with CD. Associations with SNP rs3780901 in the ALOX5 gene were borderline non-significant (OR (dominant) = 1.29, 95% CI = 0.99-1.67; p = 0.056). A haplotype comprising the 4 ALOX5 SNPs (TCAA, p = 0.036) was associated with CD, but did not withstand corrections for multiple comparisons (permuted p = 0.14).Inherited variation in enzymes involved in the synthesis/metabolism of LTB(4) may be associated with CD. These findings implicate PUFA metabolism as a important pathway in the CD pathogenesis