Environmental, Thermal, and Electrical Susceptibility of Black Phosphorus Field Effect Transistors

Atomic layers of black phosphorus (P) isolated from its layered bulk make a new two-dimensional (2D) semiconducting crystal with sizable direct bandgap, high carrier mobility, and promises for 2D electronics and optoelectronics. However, the integrity of black P crystal could be susceptible to a number of environmental variables and processes, resulting in degradation in device performance even before the device optical image suggests so. Here, we perform a systematic study of the environmental effects on black P electronic devices through continued measurements over a month under a number of controlled conditions, including ambient light, air, and humidity, and identify evolution of device performance under each condition. We further examine effects of thermal and electrical treatments on inducing morphology and, performance changes and failure modes in black P devices. The results suggest that procedures well established for nanodevices in other 2D materials may not directly apply to black P devices, and improved procedures need to be devised to attain stable device operation.Comment: in Journal of Vacuum Science & Technology B (2015

Resolving and Tuning Mechanical Anisotropy in Black Phosphorus via Nanomechanical Multimode Resonance Spectromicroscopy

Black phosphorus (P) has emerged as a layered semiconductor with a unique crystal structure featuring corrugated atomic layers and strong in-plane anisotropy in its physical properties. Here, we demonstrate that the crystal orientation and mechanical anisotropy in free-standing black P thin layers can be precisely determined by spatially resolved multimode nanomechanical resonances. This offers a new means for resolving important crystal orientation and anisotropy in black P device platforms in situ beyond conventional optical and electrical calibration techniques. Furthermore, we show that electrostatic-gating-induced straining can continuously tune the mechanical anisotropic effects on multimode resonances in black P electromechanical devices. Combined with finite element modeling (FEM), we also determine the Young's moduli of multilayer black P to be 116.1 and 46.5 GPa in the zigzag and armchair directions, respectively.Comment: Main Text: 13 Pages, 4 Figures; Supplementary Information: 5 Pages, 2 Figures, 2 Table

Impact of hypertension and smoking on the rupture of intracranial aneurysms and their joint effect

Background In general population, the prevalence of intracranial aneurysm reaches as high as three percent. The goal of the study was to analyze retrospectively the independent risk factors for the rupture of intracranial aneurysms and their joint effect. Methods The records and angiographies of continuous 519 intracranial aneurysm patients treated at our center between February 2013 and July 2014 were retrospectively analyzed. Ruptured group and unruptured group were included in the study according to their clinical and imaging information. Univariate analysis and multivariate logistic regression analysis was used to identified independent risk factors for the rupture of intracranial aneurysms. We assessed the joint effect of independent risk factors for the rupture of intracranial aneurysms with an additional logistic regression analysis. Results The results of multivariate analysis show that hypertension (odds ratio [OR], 1.51; 95% confidence interval [CI], 1.05–2.18) and smoking (odds ratio [OR], 1.57; 95% confidence interval [CI], 1.06–2.33) were independent risk factors for rupture of intracranial aneurysms. The joint risk of hypertension and smoking was higher (OR, 2.28; 95% CI, 1.29–4.02) than the risks of hypertension (OR, 1.74; 95% CI, 1.11–2.72) and smoking (OR, 1.86; 95% CI, 1.05–3.29) independently. Conclusions Hypertension and smoking increase of the rupture risk of intracranial aneurysms. And the joint risk of hypertension and smoking was higher than the risks of hypertension and smoking independently

Combination of handgrip strength and high-sensitivity modified Glasgow prognostic score predicts survival outcomes in patients with colon cancer

ObjectiveHandgrip strength (HGS) and the high-sensitivity modified Glasgow prognostic score (HS-mGPS) are associated with the survival of patients with cancer. However, no studies have investigated the combined effect of HGS and HS-mGPS on the overall survival (OS) of patients with colon cancer.MethodsProspective follow-up data of colon cancer patients undergoing radical resection from April, 2016 to September, 2019 were retrospectively collected. We combined the HGS and HS-mGPS to create a new composite index, HGS-HS-mGPS. The hazard ratio (HR) and 95% confidence interval (CI) were calculated using Cox regression models to assess the association between variables and OS. Risk factors on OS rates were investigated by Cox analyses and the nomogram was constructed using significant predictors and HGS-HS-mGPS. The predictive performance of the nomogram was evaluated by receiver operating characteristic curve and calibration curve.ResultsThis study included a total of 811 patients, of which 446 (55.0%) were male. The HGS optimal cut-off values of male and female patients were 28.8 and 19.72 kg, respectively. Multivariate analysis revealed that low HGS and high HS-mGPS were independent risk factors of colon cancer after adjusting confounders (adjusted HR = 3.20; 95% CI: 2.27–4.50; p < 0.001 and adjusted HR = 1.55; 95% CI: 1.12–2.14; p = 0.008 respectively). Patients with low HGS and high HS-mGPS had a 10.76-fold higher mortality risk than those with neither (adjusted HR = 10.76; 95% CI: 5.38–21.54; p < 0.001). A nomogram predicting 1-, 3-, and 5 year OS was constructed based on three clinicopathologic prognostic factors. Importantly, incorporating HGS-HS-mGPS into the nomogram model meaningfully improved the predictive performance. The decision curve analyses demonstrated the application value of the HGS-HS-mGPS nomogram for predicting OS of patients with colon cancer.ConclusionHGS-HS-mGPS is associated with the survival of patients with colon cancer. These findings indicate the usefulness of HGS and HS-mGPS measurements in clinical practice for improving patient assessment, cancer prognosis, and precise intervention

Modeling of the Rating of Perceived Exertion Based on Heart Rate Using Machine Learning Methods

Abstract Rating of perceived exertion (RPE) can serve as a more convenient and economical alternative to heart rate (HR) for exercise intensity control. This study aims to explore the influence of factors, such as indicators of demographic, anthropometric, body composition, cardiovascular function and basic exercise ability on the relationship between HR and RPE, and to develop the model predicting RPE from HR. 48 healthy participants were recruited to perform an incrementally 6-stage pedaling test. HR and RPE were collected during each stage. The influencing factors were identified with the forward selection method to train Gaussian Process regression (GPR), support vector machine (SVM) and linear regression models. Metrics of R2, adjusted R2 and RMSE were calculated to evaluate the performance of the models. The GPR model outperformed the SVM and linear regression models, and achieved an R2 of 0.95, adjusted R2 of 0.89 and RMSE of 0.52. Indicators of age, resting heart rate (RHR), Central arterial pressure (CAP), body fat rate (BFR) and body mass index (BMI) were identified as factors that best predicted the relationship between RPE and HR. It is possible to use GPR model to estimate RPE from HR accurately, after adjusting for age, RHR, CAP, BFR and BMI

Stent-assisted coiling of very small wide-necked intracranial aneurysms: Complications, anatomical results and clinical outcomes

Background and objective Treatment of very small (≤3mm) wide-necked intracranial aneurysms remains controversial, we investigated the efficacy and safety of stent-assisted coiling of such aneurysms. Methods From September 2008 to December 2012, 112 very small wide-necked intracranial aneurysms in 108 patients were embolized with stent-assisted coiling. We assessed the initial neurological conditions, complications and anatomic results. The follow-up results were evaluated with DSA and mRS. Results Stent deployment was successful in 104 of 108 procedures (96.3%). 11 complications (10.2%) occurred during procedures, including 5 events of aneurysm rupture, 3 events of thromboembolism. The rate of complication, rupture and thromboembolism was not statistically different between the ruptured and unruptured patients (P=0.452, P=0.369, P=1.000, respectively). The initial aneurysmal occlusion was Raymond scale (RS) 1 in 34 patients (31.5%), RS2 in 53 patients (49.1%), and RS3 in 21 patients (19.4%). 79 aneurysms were available for anatomic follow-up of 12–47 months, stable occlusion in 45 aneurysms (57.0%), progressive complete occlusion in 34 aneurysms (43.0%). 95 patients(88.0%) were available for a clinical follow-up of 12–52 months, 92 patients (96.8%) had favorable clinical outcomes (mRS ≤2), 3 patients (3.2%) had morbidity (mRS: 3–5). The morbidity was not statistically different between the ruptured and unruptured patients (P=1.000). Conclusions Stent-assisted coiling of very small wide-necked intracranial aneurysms may be effective and safe. Because of low risk of rupture in such aneurysms, the coiling of unruptured such aneurysms must be selective. The long-term efficacy and safety of coiling such aneurysms remains to be determined in larger prospective series

Detecting and phenotyping of aneuploid circulating tumor cells in patients with various malignancies

Circulating tumor cells (CTCs) have been exclusively studied and served to assess the clinical outcomes of treatments and progression of cancer. Most CTC data have mainly been derived from distinct cohorts or selected tumor types. In the present study, a total of 594 blood samples from 479 cases with 19 different carcinomas and 30 healthy samples were collected and analyzed by Subtraction enrichment method combined with immunostaining-fluorescence in situ hybridization (iFISH). Non-hematopoietic cells with aneuploid chromosome 8 (more than 2 copies) were regarded as positive CTCs. The results showed that none of CTCs was found in all 30 healthy samples. The overall positive rate of CTCs was 89.0% in diagnosed cancer patients (ranging from 75.0% to 100.0%). Average number of 11, 5, 8 and 4 CTCs per 7.5 mL was observed in lung cancer, liver cancer, renal cancer and colorectal cancer, respectively. Among 19 different carcinomas, the total number of CTCs, tetraploid chromosome 8, polyploid chromosome 8, CTM (Circulating tumor microemboli) and large CTCs in patients with stage Ⅲ and Ⅳ were statistically higher than patients with stage Ⅰ and Ⅱ (P < 0.05). Furthermore, EpCAM expression was more frequently found in most CTCs than vimentin expression, confirming that these CTCs were of epithelial origin. In addition, small and large CTCs were also classified, and the expression of vimentin was mostly observed in small CTCs and CTM. Our results revealed that there are higher numbers of CTCs, tetraploid, polyploid and large CTCs in patients with stage Ⅲ and Ⅳ, indicating that the quantification of chromosome ploidy performed by SE-iFISH for CTCs might be a useful tool to predict and evaluate therapeutic efficacy as well as to monitoring disease progression

Nanomechanical Resonators: Toward Atomic Scale

The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to new grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking features out of bulk materials such as silicon. With the flourishing multidisciplinary field of low-dimensional nanomaterials, including one-dimensional (1D) nanowires/nanotubes, and two-dimensional (2D) atomic layers such as graphene/phosphorene, growing interests and sustained efforts have been devoted to creating mechanical devices toward the ultimate limit of miniaturization— genuinely down to the molecular or even atomic scale. These ultrasmall movable structures, particularly nanomechanical resonators that exploit the vibratory motion in these 1D and 2D nano-to-atomic-scale structures, offer exceptional device-level attributes, such as ultralow mass, ultrawide frequency tuning range, broad dynamic range, and ultralow power consumption, thus holding strong promises for both fundamental studies and engineering applications. In this Review, we offer a comprehensive overview and summary of this vibrant field, present the state-of-the-art devices and evaluate their specifications and performance, outline important achievements, and postulate future directions for studying these miniscule yet intriguing molecular-scale machines

Nanomechanical Resonators: Toward Atomic Scale

The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to previously unexplored grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking features out of bulk materials such as silicon. With the flourishing multidisciplinary field of low-dimensional nanomaterials, including one-dimensional (1D) nanowires/nanotubes and two-dimensional (2D) atomic layers such as graphene/ phosphorene, growing interests and sustained effort have been devoted to creating mechanical devices toward the ultimate limit of miniaturization--genuinely down to the molecular or even atomic scale. These ultrasmall movable structures, particularly nanomechanical resonators that exploit the vibratory motion in these 1D and 2D nano-to-atomic-scale structures, offer exceptional device-level attributes, such as ultralow mass, ultrawide frequency tuning range, broad dynamic range, and ultralow power consumption, thus holding strong promises for both fundamental studies and engineering applications. In this Review, we offer a comprehensive overview and summary of this vibrant field, present the state-of-the-art devices and evaluate their specifications and performance, outline important achievements, and postulate future directions for studying these miniscule yet intriguing molecular-scale machines

Classification and regionalization of the forming environment of windblown sand disasters along the Tarim Desert Highway

Through the systematic field survey and observations, the factor quantification as well as setting the criteria, the sand disaster-forming environment along the Tarim Desert Highway can be divided into four grades by the classification and regionalization based on fuzzy mathematics. The length of the regions with significant sand disaster accounted for 37.1% of the total highway length. Particularly, the area along the Tarim Desert Highway, based on the sand disaster-forming environment classification as well as the difference in the five basic landform units along the highway, combined with the difference of wind regime, can be divided into five regions, in which the length of the regions suffering severe sand damage occupied 64.3% of the total highway length. In addition, the index of disaster formation grade along the highway decreased from north to south, showing a repeated spatial pattern in small length scales