Polyploidy levels of Chinese large-flower chrysanthemum determined by flow cytometry

Flow cytometry was used to determine the ploidy level of 405 Chinese large-flower chrysanthemum (Chrysanthemum morifolium Ramat.) cultivars. Sixty-three cultivars are triploid, 175 cultivars tetraploid, 32 cultivars pentaploid, 46 cultivars hexaploid and 1 cultivar heptaploid. Forty-eight cultivars were then randomly selected for confirmation by chromosome-counting; the results are in agreement with the classification of ploidy level by flow cytometry. Most cultivars are aneuploid. The high percentage of tetraploid and triploid, instead of hexaploid in previous studies, represents the first evidence of low ploidy in large-flower chrysanthemum, which indicated a wider range of ploidy variation in this population. The results also offer further insights to the possible evolution and the regulation of flower size of this large-flower population. Additionally, the combination of flow cytometry and chromosome-counting is proved to be efficient and necessary for large-scale ploidy screening of chrysanthemum.Keywords: Chrysanthemum, ploidy level, flow cytometr

Differential Features of Culprit Intracranial Atherosclerotic Lesions: A Whole-Brain Vessel Wall Imaging Study in Patients With Acute Ischemic Stroke.

BackgroundIntracranial atherosclerotic disease tends to affect multiple arterial segments. Using whole-brain vessel wall imaging, we sought to study the differences in plaque features among various types of plaques in patients with a recent unilateral anterior circulation ischemic stroke.Methods and resultsSixty-one patients with unilateral anterior circulation ischemic stroke were referred to undergo whole-brain vessel wall imaging (before and after contrast) within 1 month of symptom onset for intracranial atherosclerotic disease evaluations. Each plaque was classified as a culprit, probably culprit, or nonculprit lesion, according to its likelihood of causing the stroke. The associations between plaque features (thickening pattern, plaque-wall contrast ratio, high signal on T1-weighted images, plaque contrast enhancement ratio, enhancement grade, and enhancement pattern) and culprit lesions were estimated using mixed multivariable logistic regression after adjustment for maximum wall thickness. In 52 patients without motion corruption in whole-brain vessel wall imaging, a total of 178 intracranial plaques in the anterior circulation were identified, including 52 culprit lesions (29.2%), 51 probably culprit lesions (28.7%), and 75 nonculprit lesions (42.1%). High signal on T1-weighted images (adjusted odds ratio, 9.1; 95% confidence interval, 1.9-44.1; P=0.006), grade 2 (enhancement ratio of plaque ≥ enhancement ratio of pituitary) contrast enhancement (adjusted odds ratio, 17.4; 95% confidence interval, 1.8-164.9; P=0.013), and type 2 (≥50% cross-sectional wall involvement) enhancement pattern (adjusted odds ratio, 10.1; 95% confidence interval, 1.3-82.2; P=0.030) were independently associated with culprit lesions.ConclusionsHigh signal on T1-weighted images, grade 2 contrast enhancement, and type 2 enhancement pattern are associated with cerebrovascular ischemic events, which may provide valuable insights into risk stratification

Helpful to Live Healthier? Intermittent Hypoxic/Ischemic Training Benefits Vascular Homeostasis and Lipid Metabolism with Activating SIRT1 Pathways in Overweight/Obese Individuals

Introduction: The present study aimed to investigate whether and how normobaric intermittent hypoxic training (IHT) or remote ischemic preconditioning (RIPC) plus normoxic training (RNT) has a synergistic protective effect on lipid metabolism and vascular function compared with normoxic training (NT) in overweight or obese adults. Methods: A total of 37 overweight or obese adults (36.03 ± 10.48 years) were randomly assigned to 3 groups: NT group (exercise intervention in normoxia), IHT group (exercise intervention in normobaric hypoxic chamber), and RNT group (exercise intervention in normoxia + RIPC twice daily). All participants carried out the same 1-h exercise intervention for a total of 4 weeks, 5 days per week. Physical fitness parameters were evaluated at pre- and postexercise intervention. Results: After training, all three groups had a significantly decreased body mass index (p < 0.05). The IHT group had reduced body fat percentage, visceral fat mass (p < 0.05), blood pressure (p < 0.01), left ankle-brachial index (ABI), maximal heart rate (HRmax) (p < 0.05), expression of peroxisome proliferator-activated receptor-γ (PPARγ) (p < 0.01) and increased expression of SIRT1 (p < 0.05), VEGF (p < 0.01). The RNT group had lowered waist-to-hip ratio, visceral fat mass, blood pressure (p < 0.05), and HRmax (p < 0.01). Conclusion: IHT could effectively reduce visceral fat mass and improve vascular elasticity in overweight or obese individuals than pure NT with the activation of SIRT1-related pathways. And RNT also produced similar benefits on body composition and vascular function, which were weaker than those of IHT but stronger than NT. Given the convenience and economy of RNT, both intermittent hypoxic and ischemic training have the potential to be successful health promotion strategies for the overweight/obese population

Interfacial Embedding of Laser-Manufactured Fluorinated Gold Clusters Enabling Stable Perovskite Solar Cells with Efficiency Over 24%

Abstract Tackling the interfacial loss in emerged perovskite-based solar cells (PSCs) to address synchronously the carrier dynamics and the environmental stability, has been of fundamental and viable importance, while technological hurdles remain in not only creating such interfacial mediator, but the subsequent interfacial embedding in the active layer. This article reports a strategy of interfacial embedding of hydrophobic fluorinated-gold-clusters (FGCs) for highly efficient and stable PSCs. The p-type semiconducting feature enables the FGC efficient interfacial mediator to improve the carrier dynamics by reducing the interfacial carrier transfer barrier and boosting the charge extraction at grain boundaries. The hydrophobic tails of the gold clusters and the hydrogen bonding between fluorine groups and perovskite favor the enhancement of environmental stability. Benefiting from these merits, highly efficient formamidinium lead iodide PSCs (champion efficiency up to 24.02%) with enhanced phase stability under varied relative humidity (RH) from 40% to 95%, as well as highly efficient mixed-cation PSCs with moisture stability (RH of 75%) over 10 000 h are achieved. It is thus inspiring to advance the development of highly efficient and stable PSCs via interfacial embedding laser-generated additives for improved charge transfer/extraction and environmental stability

Estimation for running time and energy losses due to unproductive stops at bus stations in urban-rural traffic corridors.

To provide data support for developing fixed-route DRT based on FRT to reduce operating costs inside base routes in urban-rural traffic corridors, this paper estimated running time and energy losses due to unproductive stops at bus stations in urban-rural traffic corridors. Firstly, 14 urban-rural bus routes without ticket sellers in Xi'an are selected to demonstrate the universality of unproductive stops at bus stations. Secondly, a model for estimating running time and energy losses based on the VT-CPFM model is developed. Finally, running time and energy losses due to unproductive stops in two representative urban-rural traffic corridors are estimated. Estimated results show that the average running time loss ratios of different rounds in Routes 332, 333, 335, 338 and G1 range from 8.30% to 17.52% and that average fuel loss ratios range from 9.16% to 13.30%. In addition, the monetary loss in energy consumption of Route G1 in 2019 is estimated to be up to 193213 yuan. This study proves that unproductive stops at bus stations generally exist in urban-rural bus routes and can result in significant running time and energy losses and that developing fixed-route DRT based on FRT leveraging V2I with mobile APP in representative urban-rural traffic corridors is very necessary, which is expected to reduce energy consumption and running time

The Optimizing Effect of Nitrogen Flow Ratio on the Homoepitaxial Growth of 4H-SiC Layers

In this study, a 4H-SiC homoepitaxial layer was grown on a 150 mm 4° off-axis substrate using a horizontal hot-wall CVD reactor. The research aimed to investigate the impact of varying the C/Si ratio and temperature while also changing the N2 flow rate and N2 flow ratio on the growth rate (thickness), doping, surface roughness, and uniformity of the large-size 4H-SiC epitaxial layer. The results indicate that the growth rate and thickness uniformity of the film increases with an increase in the C/Si ratio. Additionally, adjusting the N2 flow rate in a timely manner based on the change in the C/Si ratio is crucial to achieving the best epitaxial layer doping concentration and uniformity. The study found that, as the temperature increases, the film thickness and thickness uniformity also increase. The maximum thickness recorded was 6.2 μm, while the minimum thickness uniformity was 1.44% at 1570 °C. Additionally, the surface roughness reached its lowest point at 0.81 nm at 1570 °C. To compensate for the difference in thickness and doping concentration caused by temperature distribution and uneven airflow, the N2 flow ratio was altered. In particular, at a growth temperature of 1570 °C, a N2 flow ratio of 1.78 can improve the uniformity of doping by 4.12%

Influence of Growth Process on Suppression of Surface Morphological Defects in 4H-SiC Homoepitaxial Layers

To address surface morphological defects that have a destructive effect on the epitaxial wafer from the aspect of 4H-SiC epitaxial growth, this study thoroughly examined many key factors that affect the density of defects in 4H-SiC epitaxial wafer, including the ratio of carbon to silicon, growth time, application of a buffer layer, hydrogen etching and other process parameters. Through systematic experimental verification and data analysis, it was verified that when the carbon–silicon ratio was accurately controlled at 0.72, the density of defects in the epitaxial wafer was the lowest, and its surface flatness showed the best state. In addition, it was found that the growth of the buffer layer under specific conditions could effectively reduce defects, especially surface morphology defects. This provides a new idea and method for improving the surface quality of epitaxial wafers. At the same time, we also studied the influence of hydrogen etching on the quality of epitaxial wafers. The experimental results show that proper hydrogen etching can optimize surface quality, but excessive etching may lead to the exposure of substrate defects. Therefore, it is necessary to carefully control the conditions of hydrogen etching in practical applications to avoid adverse effects. These findings have important guiding significance for optimizing the quality of epitaxial wafers