335 research outputs found
Failure Analysis of a Reactor after Explosion Accident
AbstractBurst of a reactor occurred in an explosion accident during the production of antistatic agent process. According to the results of site survey, the current regulations and standards as well as the requirements of the accident investigation group, the reason of burst was discussed by failure analysis of the shell and bolts. The shell strength was analyzed by visual inspection, thickness measurement, and strength verification as well as estimating of bursting pressure. It can be concluded that the tank strength met the requirements of design condition. The bolts of the reactor was broken in the accident, so the failure analysis of bolts was carried out in detail, including visual inspection, fracture examination, chemical composition analysis, mechanical testing and strength verification. According to the results of the measured mechanical properties, the strength of the bolts was verified. It can be concluded that the bolts could bear the proof pressure test safely. Fracture analysis shows that no obvious metallurgical defects were found, the bolts were broken due to extreme overload. According to the technical analysis of the shell and the bolts, it can be concluded that the reactor could service safely under normal operating conditions. The cause of the bursting was transient extreme overpressure
Revisiting the -Meson Production at the Hadronic Colliders
The production of heavy-flavored hadron at the hadronic colliders provides a
challenging opportunity to test the validity of pQCD predictions. There are two
mechanisms for the hadroproduction, i.e. the gluon-gluon fusion
mechanism via the subprocess and the
extrinsic heavy quark mechanism via the subprocesses and , both of which shall have sizable
contributions in proper kinematic region. Different from the
fixed-flavor-number scheme (FFNS) previously adopted in the literature, we
study the hadroproduction under the general-mass
variable-flavor-number scheme (GM-VFNS), in which we can consistently deal with
the double counting problem from the above two mechanisms. Properties for the
hadroproduction are discussed. To be useful reference, a
comparative study of FFNS and GM-VFNS is presented. Both of which can provide
reasonable estimations for the hadroproduction. At the Tevatron,
the difference between these two schemes is small, however such difference is
obvious at the LHC. The forthcoming more precise data on LHC shall provide a
good chance to check which scheme is more appropriate to deal with the
-meson production and to further study the heavy quark components in
hadrons.Comment: 18 pages, 8 figures, 4 tables. To match the published version. To be
published in Eur.Phys.J.
The energy spectrum of all-particle cosmic rays around the knee region observed with the Tibet-III air-shower array
We have already reported the first result on the all-particle spectrum around
the knee region based on data from 2000 November to 2001 October observed by
the Tibet-III air-shower array. In this paper, we present an updated result
using data set collected in the period from 2000 November through 2004 October
in a wide range over 3 decades between eV and eV, in which
the position of the knee is clearly seen at around 4 PeV. The spectral index is
-2.68 0.02(stat.) below 1PeV, while it is -3.12 0.01(stat.) above 4
PeV in the case of QGSJET+HD model, and various systematic errors are under
study now.Comment: 12 pages, 7 figures, accepted by Advances in space researc
Moon Shadow by Cosmic Rays under the Influence of Geomagnetic Field and Search for Antiprotons at Multi-TeV Energies
We have observed the shadowing of galactic cosmic ray flux in the direction
of the moon, the so-called moon shadow, using the Tibet-III air shower array
operating at Yangbajing (4300 m a.s.l.) in Tibet since 1999. Almost all cosmic
rays are positively charged; for that reason, they are bent by the geomagnetic
field, thereby shifting the moon shadow westward. The cosmic rays will also
produce an additional shadow in the eastward direction of the moon if cosmic
rays contain negatively charged particles, such as antiprotons, with some
fraction. We selected 1.5 x10^{10} air shower events with energy beyond about 3
TeV from the dataset observed by the Tibet-III air shower array and detected
the moon shadow at level. The center of the moon was detected
in the direction away from the apparent center of the moon by 0.23 to
the west. Based on these data and a full Monte Carlo simulation, we searched
for the existence of the shadow produced by antiprotons at the multi-TeV energy
region. No evidence of the existence of antiprotons was found in this energy
region. We obtained the 90% confidence level upper limit of the flux ratio of
antiprotons to protons as 7% at multi-TeV energies.Comment: 13pages,4figures; Accepted for publication in Astroparticle Physic
Direct Measurements of the Branching Fractions for and and Determinations of the Form Factors and
The absolute branching fractions for the decays and
are determined using singly
tagged sample from the data collected around 3.773 GeV with the
BES-II detector at the BEPC. In the system recoiling against the singly tagged
meson, events for and events for decays are observed. Those yield
the absolute branching fractions to be and . The
vector form factors are determined to be
and . The ratio of the two form
factors is measured to be .Comment: 6 pages, 5 figure
Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta
Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector,
the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are
measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and
(7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure
BESII Detector Simulation
A Monte Carlo program based on Geant3 has been developed for BESII detector
simulation. The organization of the program is outlined, and the digitization
procedure for simulating the response of various sub-detectors is described.
Comparisons with data show that the performance of the program is generally
satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM
Measurement of branching fractions for the inclusive Cabibbo-favored ~K*0(892) and Cabibbo-suppressed K*0(892) decays of neutral and charged D mesons
The branching fractions for the inclusive Cabibbo-favored ~K*0 and
Cabibbo-suppressed K*0 decays of D mesons are measured based on a data sample
of 33 pb-1 collected at and around the center-of-mass energy of 3.773 GeV with
the BES-II detector at the BEPC collider. The branching fractions for the
decays D+(0) -> ~K*0(892)X and D0 -> K*0(892)X are determined to be BF(D0 ->
\~K*0X) = (8.7 +/- 4.0 +/- 1.2)%, BF(D+ -> ~K*0X) = (23.2 +/- 4.5 +/- 3.0)% and
BF(D0 -> K*0X) = (2.8 +/- 1.2 +/- 0.4)%. An upper limit on the branching
fraction at 90% C.L. for the decay D+ -> K*0(892)X is set to be BF(D+ -> K*0X)
< 6.6%
Search for the Lepton Flavor Violation Processes and
The lepton flavor violation processes and are
searched for using a sample of 5.8 events collected with
the BESII detector. Zero and one candidate events, consistent with the
estimated background, are observed in and
decays, respectively. Upper limits on the branching ratios are determined to be
and at the 90% confidence level (C.L.).Comment: 9 pages, 2 figure
Study of
New data are presented on from a sample of 58M
events in the upgraded BES II detector at the BEPC. There is a
conspicuous signal for and a peak at higher mass which
may be fitted with . From a combined analysis with
data, the branching ratio
is at the 95%
confidence level.Comment: 11 pages, 5 figures. Submitted to Phys. Lett.
- …