Generalized pairwise z-complementary codes

An approach to generate generalized pairwise Z-complementary (GPZ) codes, which works in pairs in order to offer a zero correlation zone (ZCZ) in the vicinity of zero phase shift and fit extremely well in power efficient quadrature carrier modems, is introduced in this letter. Each GPZ code has MK sequences, each of length 4NK, whereMis the number of Z-complementary mates, K is a factor to perform Walsh–Hadamard expansions, and N is the sequence length of the Z-complementary code. The proposed GPZ codes include the generalized pairwise complementary (GPC)codes as special cases

Effect factors of part-load performance for various Organic Rankine cycles using in engine waste heat recovery

The Organic Rankine Cycle (ORC) is regarded as one of the most promising waste heat recovery technologies for electricity generation engines. Since the engine usually operates under different working conditions, it is important to research the part-load performance of the ORC. In order to reveal the effect factors of part-load performance, four different forms of ORCs are compared in the study with dynamic math models established in SIMULINK. They are the ORC applying low temperature working fluid R245fa with a medium heat transfer cycle, the ORCs with high temperature working fluid toluene heated directly by exhaust condensing at low pressure and high pressure, and the double-stage ORC. It is regarded that the more slowly the system output power decreases, the better part-load performance it has. Based on a comparison among the four systems, the effects of evaporating pressure, condensing condition, working fluid, and system structure on part-load performance are revealed in the work. Further, it is found that the system which best matches with the heat source not only performs well under the design conditions, but also has excellent part-load performance

Temporal and Spectral Correlations of Cyg X-1

Temporal and spectral properties of X-ray rapid variability of Cyg X-1 are studied by an approach of correlation analysis in the time domain on different time scales. The correlation coefficients between the total intensity in 2-60 keV and the hardness ratio of 13-60 keV to 2-6 keV band on the time scale of about 1 ms are always negative in all states. For soft states, the correlation coefficients are positive on all the time scales from about 0.01 s to 100 s, which is significantly different with that for transition and low states. Temporal structures in high energy band are narrower than that in low energy band in quite a few cases. The delay of high energy photons relative to low energy ones in the X-ray variations has also been revealed by the correlation analysis. The implication of observed temporal and spectral characteristics to the production region and mechanism of Cyg X-1 X-ray variations is discussed.Comment: 17 pages, 6 figures included, to appear in Ap

Experimental study on transcritical Rankine cycle (TRC) using CO2/R134a mixtures with various composition ratios for waste heat recovery from diesel engines

A carbon dioxide (CO2) based mixture was investigated as a promising solution to improve system performance and expand the condensation temperature range of a CO2 transcritical Rankine cycle (C-TRC). An experimental study of TRC using CO2/R134a mixtures was performed to recover waste heat of engine coolant and exhaust gas from a heavy-duty diesel engine. The main purpose of this study was to investigate experimentally the effect of the composition ratio of CO2/R134a mixtures on system performance. Four CO2/R134a mixtures with mass composition ratios of 0.85/0.15, 0.7/0.3, 0.6/0.4 and 0.4/0.6 were selected. The high temperature working fluid was expanded through an expansion valve and then no power was produced. Thus, current research focused on the analysis of measured operating parameters and heat exchanger performance. Heat transfer coefficients of various heat exchangers using supercritical CO2/R134a mixtures were provided and discussed. These data may provide useful reference for cycle optimization and heat exchanger design in application of CO2 mixtures. Finally, the potential of power output was estimated numerically. Assuming an expander efficiency of 0.7, the maximum estimations of net power output using CO2/R134a (0.85/0.15), CO2/R134a (0.7/0.3), CO2/R134a (0.6/0.4) and CO2/R134a (0.4/0.6) are 5.07 kW, 5.45 kW, 5.30 kW, and 4.41 kW, respectively. Along with the increase of R134a composition, the estimation of net power output, thermal efficiency and exergy efficiency increased at first and then decreased. CO2/R134a (0.7/0.3) achieved the maximum net power output at a high expansion inlet pressure, while CO2/R134a (0.6/0.4) behaves better at low pressure

Escherichia coli of sequence type 3835 carrying blaNDM-1, blaCTX-M-15, blaCMY-42 and blaSHV-12

New Delhi metallo-β-lactamase (NDM) represents a serious challenge for treatment and public health. A carbapenem-resistant Escherichia coli clinical strain WCHEC13-8 was subjected to antimicrobial susceptibility tests, whole genome sequencing and conjugation experiments. It was resistant to imipenem (MIC, >256 μg/ml) and meropenem (MIC, 128 μg/ml) and belonged to ST3835. blaNDM-1 was the only carbapenemase gene detected. Strain WCHEC13-8 also had a plasmid-borne AmpC gene (blaCMY-42) and two extended-spectrum β-lactamase genes (blaCTX-M-15 and blaSHV-12). blaNDM-1 and blaSHV-12 were carried by a 54-kb IncX3 self-transmissible plasmid, which is identical to plasmid pNDM-HF727 from Enterobacter cloacae. blaCMY-42 was carried by a 64-kb IncI1 plasmid and blaCTX-M-15 was located on a 141-kb plasmid with multiple F replicons (replicon type: F36:A4:B1). blaCMY-42 was in a complicated context and the mobilisation of blaCMY-42 was due to the transposition of IS Ecp1 by misidentifying its right-end boundary. Genetic context of blaNDM-1 in strain WCHEC13-8 was closely related to those on IncX3 plasmids in various Enterobacteriaceae species in China. In conclusion, a multidrug-resistant ST3835 E. coli clinical strain carrying blaNDM-1, blaCTX-M-15, blaCMY-42 and blaSHV-12 was identified. IncX3 plasmids may be making a significant contribution to the dissemination of blaNDM among Enterobacteriaceae in China