2,299 research outputs found
Evidence for erbium-erbium energy migration in erbium(III) bis(perfluoro-p-tolyl)phosphinate
Copyright 2008 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. This article appeared in Applied Physics Letters 92, 103303 (2008) and may be found at
Expression of Ki-67 and Bcl-2 in gastric epithelial cells: role of antralization in gastric carcinogenesis
published_or_final_versio
Debris Disks: Probing Planet Formation
Debris disks are the dust disks found around ~20% of nearby main sequence
stars in far-IR surveys. They can be considered as descendants of
protoplanetary disks or components of planetary systems, providing valuable
information on circumstellar disk evolution and the outcome of planet
formation. The debris disk population can be explained by the steady
collisional erosion of planetesimal belts; population models constrain where
(10-100au) and in what quantity (>1Mearth) planetesimals (>10km in size)
typically form in protoplanetary disks. Gas is now seen long into the debris
disk phase. Some of this is secondary implying planetesimals have a Solar
System comet-like composition, but some systems may retain primordial gas.
Ongoing planet formation processes are invoked for some debris disks, such as
the continued growth of dwarf planets in an unstirred disk, or the growth of
terrestrial planets through giant impacts. Planets imprint structure on debris
disks in many ways; images of gaps, clumps, warps, eccentricities and other
disk asymmetries, are readily explained by planets at >>5au. Hot dust in the
region planets are commonly found (<5au) is seen for a growing number of stars.
This dust usually originates in an outer belt (e.g., from exocomets), although
an asteroid belt or recent collision is sometimes inferred.Comment: Invited review, accepted for publication in the 'Handbook of
Exoplanets', eds. H.J. Deeg and J.A. Belmonte, Springer (2018
Unlocking the secrets of the midplane gas and dust distribution in the young hybrid disc HD 141569
Context. HD 141569 is a pre-main sequence star with a disc uniquely placed between protoplanetary and debris discs, similar to the older "hybrid" type discs.
Aims: This work aims to place the mass and spatial structure of the disc midplane in the context of the debris, hybrid and protoplanetary discs.
Methods: We observed HD 141569 with ALMA in 1.3 mm continuum and 13CO (2-1). This is the first detection and image of the optically thin gas emission from the midplane of this disc.
Results: In continuum emission, we detect a combination of an unresolved central peak and a ring of millimetre emission at 220 ± 10 au, slightly interior to one of the rings discovered in scattered light. The minimum dust mass of the ring is 0.13 ± 0.02 M⊕ while the unresolved millimetre peak at the stellar location is predominantly thermal emission due to a minimum of 1.2 ± 0.2 M⊕ of dust. 13CO is distributed asymmetrically around the stellar position with a peak at 1ʺ&dotbelow;1 distance and a PA of -33°. The gas is detected as far as 220 ± 10 au, a radial separation the same as that of the mm ring. Assuming optically thin emission and standard ISM abundances, we used our 13CO data to derive the gas mass in the disc of (6.0 ± 0.9) × 10-4M⊙. Comparison to published 12CO data shows that 12CO is optically thick, explaining why estimates based on 12CO underestimated the gas mass
Dusty Planetary Systems
Extensive photometric stellar surveys show that many main sequence stars show
emission at infrared and longer wavelengths that is in excess of the stellar
photosphere; this emission is thought to arise from circumstellar dust. The
presence of dust disks is confirmed by spatially resolved imaging at infrared
to millimeter wavelengths (tracing the dust thermal emission), and at optical
to near infrared wavelengths (tracing the dust scattered light). Because the
expected lifetime of these dust particles is much shorter than the age of the
stars (>10 Myr), it is inferred that this solid material not primordial, i.e.
the remaining from the placental cloud of gas and dust where the star was born,
but instead is replenished by dust-producing planetesimals. These planetesimals
are analogous to the asteroids, comets and Kuiper Belt objects (KBOs) in our
Solar system that produce the interplanetary dust that gives rise to the
zodiacal light (tracing the inner component of the Solar system debris disk).
The presence of these "debris disks" around stars with a wide range of masses,
luminosities, and metallicities, with and without binary companions, is
evidence that planetesimal formation is a robust process that can take place
under a wide range of conditions. This chapter is divided in two parts. Part I
discusses how the study of the Solar system debris disk and the study of debris
disks around other stars can help us learn about the formation, evolution and
diversity of planetary systems by shedding light on the frequency and timing of
planetesimal formation, the location and physical properties of the
planetesimals, the presence of long-period planets, and the dynamical and
collisional evolution of the system. Part II reviews the physical processes
that affect dust particles in the gas-free environment of a debris disk and
their effect on the dust particle size and spatial distribution.Comment: 68 pages, 25 figures. To be published in "Solar and Planetary
Systems" (P. Kalas and L. French, Eds.), Volume 3 of the series "Planets,
Stars and Stellar Systems" (T.D. Oswalt, Editor-in-chief), Springer 201
Inkjet printed circuits with two-dimensional semiconductor inks for high-performance electronics
Air-stable semiconducting inks suitable for complementary logic are key to create low-power printed integrated circuits (ICs). High-performance printable electronic inks with two-dimensional materials have the potential to enable the next generation of high performance, low-cost printed digital electronics. Here we demonstrate air-stable, low voltage (< 5 V) operation of inkjet-printed n-type molybdenum disulfide (MoS2) and p-type indacenodithiophene-co-benzothiadiazole (IDT-BT) field-effect transistors (FETs), estimating a switching time of {\tau} ~ 3.3 {\mu}s for the MoS2 FETs. We achieve this by engineering high-quality MoS2 and air-stable IDT-BT inks suitable for inkjet-printing complementary pairs of n-type MoS2 and p-type IDT-BT FETs. We then integrate MoS2 and IDT-BT FETs to realise inkjet-printed complementary logic inverters with a voltage gain |Av| ~ 4 when in resistive load configuration and |Av| ~ 1.36 in complementary configuration. These results represent a key enabling step towards ubiquitous long-term stable, low-cost printed digital ICs
Asymmetric mid-plane gas in ALMA images of HD 100546
In this paper we present new ALMA observations towards the proto-planet
hosting transitional disc of Herbig Ae/Be star HD 100546. This includes
resolved 1.3 mm continuum, CO and the first detection of CO in
this disc, which displays azimuthal asymmetry in regions spatially coincident
with structures previously identified in HST images related to spiral arms. The
lower limit on the mass of the dust disc is calculated to be
9.6x10M. A firm lower-limit on the total gas mass calculated
from optically thin, mid-plane tracing CO (2-1) emission is
0.018M assuming ISM abundances. These mass estimates provide an
estimate of gas-to-dust ratio in the disc of 19, the ratio will increase if
CO is relatively under-abundant in the disc compared to CO and H2.
Through deprojection and azimuthal averaging of the image plane we detect 1.3
mm continuum emission out to 290+/-10 au,CO to 390+/-10 au and CO
to 300+/-10au. We measure a radially increasing millimetre spectral index
between wavelengths of 867m and 1.3 mm, which shows that grain sizes
increase towards the star, with solid particles growing to cm scales in the
inner disc
The Relationship Between HR Practices and Firm Performance: Examining Causal Order
Significant research attention has been devoted to examining the relationship between HR practices and firm performance, and the research support has assumed HR as the causal variable. Using data from 45 business units (with 62 data points), this study examines how measures of HR practices correlate with past, concurrent, and future operational performance measures. The results indicate that correlations with performance measures at all three times are both high and invariant, and that controlling for past or concurrent performance virtually eliminates the correlation of HR with future performance. Implications are discussed
Reliability and Validity of the Telephone-Based eHealth Literacy Scale Among Older Adults: Cross-Sectional Survey
Background: Only a handful of studies have examined reliability and validity evidence of scores produced by the 8-item eHealth literacy Scale (eHEALS) among older adults. Older adults are generally more comfortable responding to survey items when asked by a real person rather than by completing self-administered paper-and-pencil or online questionnaires. However, no studies have explored the psychometrics of this scale when administered to older adults over the telephone.
Objective: The objective of our study was to examine the reliability and internal structure of eHEALS data collected from older adults aged 50 years or older responding to items over the telephone.
Methods: Respondents (N=283) completed eHEALS as part of a cross-sectional landline telephone survey. Exploratory structural equation modeling (E-SEM) analyses examined model fit of eHEALS scores with 1-, 2-, and 3-factor structures. Subsequent analyses based on the partial credit model explored the internal structure of eHEALS data.
Results: Compared with 1- and 2-factor models, the 3-factor eHEALS structure showed the best global E-SEM model fit indices (root mean square error of approximation=.07; comparative fit index=1.0; Tucker-Lewis index=1.0). Nonetheless, the 3 factors were highly correlated (r range .36 to .65). Item analyses revealed that eHEALS items 2 through 5 were overfit to a minor degree (mean square infit/outfit values <1.0; t statistics less than –2.0), but the internal structure of Likert scale response options functioned as expected. Overfitting eHEALS items (2-5) displayed a similar degree of information for respondents at similar points on the latent continuum. Test information curves suggested that eHEALS may capture more information about older adults at the higher end of the latent continuum (ie, those with high eHealth literacy) than at the lower end of the continuum (ie, those with low eHealth literacy). Item reliability (value=.92) and item separation (value=11.31) estimates indicated that eHEALS responses were reliable and stable.
Conclusions: Results support administering eHEALS over the telephone when surveying older adults regarding their use of the Internet for health information. eHEALS scores best captured 3 factors (or subscales) to measure eHealth literacy in older adults; however, statistically significant correlations between these 3 factors suggest an overarching unidimensional structure with 3 underlying dimensions. As older adults continue to use the Internet more frequently to find and evaluate health information, it will be important to consider modifying the original eHEALS to adequately measure societal shifts in online health information seeking among aging populations.Open Access Fundin
Assessing public perception of a sand fly biting study on the pathway to a controlled 2 human infection model for cutaneous leishmaniasis
BACKGROUND: A controlled human infection model (CHIM) involves deliberate exposure of volunteers to pathogens to assess their response to new therapies at an early stage of development. We show here how we used public involvement to help shape the design of a CHIM to support future testing of candidate vaccines for the neglected tropical disease cutaneous leishmaniasis, a disease transmitted by the bite of infected sand flies in tropical regions. METHODS: We undertook a public involvement (PI) consultation exercise to inform development of a study to test the safety and effectiveness of a sand fly biting protocol using uninfected sand flies (FLYBITE: ClinicalTrials.gov ID NCT03999970 ) and a CHIM using Leishmania major-infected sand flies (LEISH_Challenge: ClinicalTrials.gov ID NCT04512742 ), both taking place in York, UK. We involved 10 members of the public including a patient research ambassador and a previous CHIM volunteer. The session took place at The University of York, UK and examined draft study volunteer-facing material and included the CHIM study design, potential adverse events and therapeutic interventions at study endpoints. A discussion of the scientific, ethical, humanitarian and economic basis for the project was presented to the participants to provoke discourse. An inductive, thematic analysis was used to identify the participants' key concerns. RESULTS: Themes were identified relating to i) quality of volunteer-facing written information, ii) improving study design, and iii) factors to motivate involvement in the research. Group participants responded positively to the overall study aims. Initial concerns were expressed about potential risks of study involvement, but further explanation of the science and mitigations of risk secured participant support. Participants provided advice and identified improved terminology to inform the volunteer-facing material. Lastly, treatment options were discussed, and excision of any cutaneous lesion was favoured over alternatives as a treatment. CONCLUSION: The consultation exercise provided invaluable information which led to improved study design and enhanced clarity in the volunteer-facing material. The session also reinforced the need to maintain public trust in scientific rigour prior to initiation of any study. The investigators hope that this description strengthens understanding of PI in clinical research, and encourages its use within other studies
- …