A novel multifunctional biomedical material based on polyacrylonitrile:preparation and characterization

Wet spun microfibers have great potential in the design of multifunctional controlled release materials. Curcumin (Cur) and vitamin E acetate (Vit. E Ac) were used as a model drug system to evaluate the potential application of the drug-loaded microfiber system for enhanced delivery. The drugs and polyacrylonitrile (PAN) were blended together and spun to produce the target drug-loaded microfiber using an improved wet-spinning method and then the microfibers were successfully woven into fabrics. Morphological, mechanical properties, thermal behavior, drug release performance characteristics, and cytocompatibility were determined. The drug-loaded microfiber had a lobed “kidney” shape with a height of 50 ~ 100 μm and width of 100 ~ 200 μm. The addition of Cur and Vit. E Ac had a great influence on the surface and cross section structure of the microfiber, leading to a rough surface having microvoids. X-ray diffraction and Fourier transform infrared spectroscopy indicated that the drugs were successfully encapsulated and dispersed evenly in the microfilament fiber. After drug loading, the mechanical performance of the microfilament changed, with the breaking strength improved slightly, but the tensile elongation increased significantly. Thermogravimetric results showed that the drug load had no apparent adverse effect on the thermal properties of the microfibers. However, drug release from the fiber, as determined through in-vitro experiments, is relatively low and this property is maintained over time. Furthermore, in-vitro cytocompatibility testing showed that no cytotoxicty on the L929 cells was found up to 5% and 10% respectively of the theoretical drug loading content (TDLC) of curcumin and vitamin E acetate. This study provides reference data to aid the development of multifunctional textiles and to explore their use in the biomedical material field

Fabrication and investigation of a biocompatible microfilament with high mechanical performance based on regenerated bacterial cellulose and bacterial cellulose

A high-strength regenerated bacterial cellulose (RBC)/bacterial cellulose (BC) microfilament of potential use as a biomaterial was successfully prepared via a wet spinning process. The BC not only consists of a 3-D network composed of nanofibers with a diameter of several hundred nanometers but also has a secondary structure consisting of highly oriented nanofibrils with a diameter ranging from a few nanometers to tens of nanometers which explains the reason for the high mechanical strength of BC. Furthermore, a strategy of partially dissolving BC was used and this greatly enhanced the mechanical performance of spun filament and a method called post-treatment was utilized to remove residual solvents from the RBC/BC filaments. A comparison of structure, properties, as well as cytocompatibility between BC nanofibers and RBC/BC microfilaments was achieved using morphology, mechanical properties, X-ray Diffraction (XRD) and an enzymatic hydrolysis assay. The RBC/BC microfilament has a uniform groove structure with a diameter of 50–60 μm and XRD indicated that the crystal form was transformed from cellulose Iα to cellulose IIII and the degree of crystallinity of RBC/BC (33.22%) was much lower than the original BC (60.29%). The enzymatic hydrolysis assay proved that the RBC/BC material was more easily degraded than BC. ICP detection indicated that the residual amount of lithium was 0.07 mg/g (w/w) and GC–MS analysis showed the residual amount of DMAc to be 8.51 μg/g (w/w) demonstrating that the post-treatment process is necessary and effective for removal of residual materials from the RBC/BC microfilaments. Also, a cell viability assay demonstrated that after post-treatment the RBC/BC filaments had good cytocompatibility

Cholesteryl ester transfer protein TaqIB polymorphism and its association with serum lipid levels and longevity in Chinese Bama Zhuang population

<p>Abstract</p> <p>Background</p> <p><it>Taq</it>IB polymorphism in the cholesteryl ester transfer protein (CETP) gene has been reported to be associated with serum high-density lipoprotein cholesterol (HDL-C) levels and longevity in several populations, but controversial results also arose probably due to racial/ethnic diversity. Bama is a remote and mountainous county located in the northwest of Guangxi, People's Republic of China, which has been well known for its longevity for centuries. The current study was to investigate the possible association of CETP <it>Taq</it>IB polymorphism with serum lipid levels and longevity in the Bama Zhuang population.</p> <p>Methods</p> <p>The CETP <it>Taq</it>IB genotypes were determined by polymerase chain reaction and restriction fragment length polymorphism in 523 long-lived inhabitants (long-lived group, LG; aged 90-107 years) and 498 healthy controls without longevity family history (non-long-lived group, non-LG; aged 40-69 years) residing in Bama County.</p> <p>Results</p> <p>The levels of total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), and low-density lipoprotein cholesterol (LDL-C) were higher but TG, HDL-C/LDL-C ratio and the prevalence of dyslipidemia were lower in LG than in non-LG (<it>P </it>< 0.001 for all). There were no differences in the allelic and genotypic frequencies between the two groups (<it>P </it>> 0.05). Serum HDL-C levels and HDL-C/LDL-C ratio in LG were different among the genotypes (<it>P </it>< 0.01 for each), the subjects with B2B2 and B1B2 genotyes had higher HDL-C levels and HDL-C/LDL-C ratio than the subjects with B1B1genotye, whereas the levels of TC and HDL-C in non-LG were different among/between the genotypes (<it>P </it>< 0.01 for each), the B2 allele carriers had lower TC and higher HDL-C levels than the B2 allele noncarriers. Serum TG and HDL-C levels and HDL-C/LDL-C ratio were correlated with genotypes in LG, whereas serum TC and HDL-C levels were associated with genotypes in non-LG (<it>P </it>< 0.05-0.001).</p> <p>Conclusions</p> <p>The association of CETP <it>Taq</it>IB polymorphism and serum lipid profiles is different between LG and non-LG in the Chinese Bama Zhuang population. CETP <it>Taq</it>IB polymorphism might be one of the longevity-related genetic factors in this population.</p

Phylogenetic and molecular characterization of coxsackievirus A24 variant isolates from a 2010 acute hemorrhagic conjunctivitis outbreak in Guangdong, China

<p>Abstract</p> <p>Background</p> <p>Acute hemorrhagic conjunctivitis is a common disease in China. As a notifiable disease, cases are registered by ophthalmologists on the AHC surveillance system. An AHC outbreak caused by CA24v was observed in Guangdong Province in 2007 by the National Disease Supervision Information Management System. Three years later, a larger outbreak occurred in Guangdong during the August-October period (2010). To characterize the outbreak and compare the genetic diversity of CA24v, which was determined to be the cause of the outbreak, the epidemiology and the molecular characterization of CA24v were analyzed in this study.</p> <p>Results</p> <p>A total of 69,635 cases were reported in the outbreak. 73.5% of index cases originated from students, children in kindergarten and factory workers, with the ≦ 9 age group at the highest risk. The male to female ratio was 1.84:1 among 0-19 years. 56 conjunctival swabs were collected to identify the causative agent from five cities with the AHC outbreak. 30 virus strains were isolated, and two of the genomes had the highest identity values (95.8%) with CA24v genomes. Four CA24v genotypes were identified by phylogenetic analysis for the VP1 and 3C regions. CA24v which caused the outbreak belonged to genotype IV. Furthermore, full nucleotide sequences for four representative isolates in 2010 and 2007 were determined and compared. 20 aa mutations, two nt insertions and one nt deletion were observed in the open reading frame, with 5'- and 3'- UTR respectively between them.</p> <p>Conclusions</p> <p>CA24v was determined to be the pathogen causing the outbreak and belongs to genotype IV. VP1 is more informative than 3C^Profor describing molecular epidemiology and we hypothesize that accumulative mutations may have promoted the outbreak.</p

Modeling Errors in Daily Precipitation Measurements: Additive or Multiplicative?

The definition and quantification of uncertainty depend on the error model used. For uncertainties in precipitation measurements, two types of error models have been widely adopted: the additive error model and the multiplicative error model. This leads to incompatible specifications of uncertainties and impedes intercomparison and application.In this letter, we assess the suitability of both models for satellite-based daily precipitation measurements in an effort to clarify the uncertainty representation. Three criteria were employed to evaluate the applicability of either model: (1) better separation of the systematic and random errors; (2) applicability to the large range of variability in daily precipitation; and (3) better predictive skills. It is found that the multiplicative error model is a much better choice under all three criteria. It extracted the systematic errors more cleanly, was more consistent with the large variability of precipitation measurements, and produced superior predictions of the error characteristics. The additive error model had several weaknesses, such as non constant variance resulting from systematic errors leaking into random errors, and the lack of prediction capability. Therefore, the multiplicative error model is a better choice

An improved system for competent cell preparation and high efficiency plasmid transformation using different Escherichia coli strains

This paper describes an efficient bacterial transformation system that was established for the preparation of competent cells, plasmid preparation, and for the storage in bacterial stocks in our laboratory. Using this method, a number of different plasmids have been amplified for further experiments. Competent cells for bacterial transformation were prepared by the calcium chloride method with an optimum concentration of 75 mM. Three different strains of Escherichia coli that were tested are DH5\u3b1, TG1 and XL1 blue, and the most efficient strain being XL1 blue. The optimal optical density (OD600) range for competent cell preparation varied for each of the strains investigated, and for XL1 blue it was 0.15-0.45; for TG1 it was 0.2-0.5; and for DH5\u3b1 it was 0.145-0.45. The storage time of competent cells and its correlation to transformation efficiency has been studied, and the result showed that competent cells can be stored at -20\ub0C for 7 days and at -70\ub0C for 15 days. Three critical alterations to previous methods have been made, which are the changing of the normal CaCl2 solution to TB solution, the changing of the medium from LB to S.O.C., and addition of DMSO or PEG8000 during transformation of competent cells with plasmids. Changing the medium from LB to S.O.C., resulted in much faster growth of transformants, and the transformation efficiency was increased. Addition of DMSO or PEG8000 raised transformation efficiencies by 100-300 fold. Our improved bacterial transformation system can raise the transformation efficiency about 103 times, making it becoming a highly efficient bacterial transformation system

An Updated Search of Steady TeV γ−\gamma-Ray Point Sources in Northern Hemisphere Using the Tibet Air Shower Array

Using the data taken from Tibet II High Density (HD) Array (1997 February-1999 September) and Tibet-III array (1999 November-2005 November), our previous northern sky survey for TeV $\gamma-$ray point sources has now been updated by a factor of 2.8 improved statistics. From $0.0^{\circ}$ to $60.0^{\circ}$ in declination (Dec) range, no new TeV $\gamma-$ray point sources with sufficiently high significance were identified while the well-known Crab Nebula and Mrk421 remain to be the brightest TeV $\gamma-$ray sources within the field of view of the Tibet air shower array. Based on the currently available data and at the 90% confidence level (C.L.), the flux upper limits for different power law index assumption are re-derived, which are approximately improved by 1.7 times as compared with our previous reported limits.Comment: This paper has been accepted by hepn