54,327 research outputs found

    Fluidic hydrogen detector production prototype development

    Get PDF
    A hydrogen gas sensor that can replace catalytic combustion sensors used to detect leaks in the liquid hydrogen transfer systems at Kennedy Space Center was developed. A fluidic sensor concept, based on the principle that the frequency of a fluidic oscillator is proportional to the square root of the molecular weight of its operating fluid, was utilized. To minimize sensitivity to pressure and temperature fluctuations, and to make the sensor specific for hydrogen, two oscillators are used. One oscillator operates on sample gas containing hydrogen, while the other operates on sample gas with the hydrogen converted to steam. The conversion is accomplished with a small catalytic converter. The frequency difference is taken, and the hydrogen concentration computed with a simple digital processing circuit. The output from the sensor is an analog signal proportional to hydrogen content. The sensor is shown to be accurate and insensitive to severe environmental disturbances. It is also specific for hydrogen, even with large helium concentrations in the sample gas

    Multiplex evaluation of influenza neutralizing antibodies with potential applicability to in-field serological studies

    Get PDF
    The increased number of outbreaks of H5 and H7 LPAI and HPAI viruses in poultry has major public and animal health implications. The continuous rapid evolution of these subtypes and the emergence of new variants influence the ability to undertake effective surveillance. Retroviral pseudotypes bearing influenza haemagglutinin (HA) and neuraminidase (NA) envelope glycoproteins represent a flexible platform for sensitive, readily standardized influenza serological assays. We describe a multiplex assay for the study of neutralizing antibodies that are directed against both influenza H5 and H7 HA. This assay permits the measurement of neutralizing antibody responses against two antigenically distinct HAs in the same serum/plasma sample thus increasing the amount and quality of serological data that can be acquired from valuable sera. Sera obtained from chickens vaccinated with a monovalent H5N2 vaccine, chickens vaccinated with a bivalent H7N1/H5N9 vaccine, or turkeys naturally infected with an H7N3 virus were evaluated in this assay and the results correlated strongly with data obtained by HI assay. We show that pseudotypes are highly stable under basic cold-chain storage conditions and following multiple rounds of freeze-thaw. We propose that this robust assay may have practical utility for in-field sero-surveillance and vaccine studies in resource-limited regions worldwide

    People and guns involved in denied and completed handgun sales

    Get PDF
    Objective: Denial of handgun purchases by prohibited people and knowledge of the structure of gun commerce have helped to deter and prevent firearm violence. The authors hypothesize that handguns involved in a denied purchase would more closely resemble those used in crime compared with handguns sold. Design: Cross sectional. Setting: Denied and completed handgun sales in California, 1998 -- 2000. Main outcome measures: Handgun and purchaser characteristics of denied and completed sales were compared. In particular, handgun characteristics most closely associated with crime guns (type, caliber, barrel length, price) were examined. Results: Compared with handguns sold, handguns in denied sales were somewhat more likely to be semiautomatic pistols (74.6% v 69.4%), to have short barrels (25.9% v 22.2%), and be of medium caliber (48.9% v 37.3%). Ten percent of the handguns in denied sales and 3.4% of handguns sold were identified as inexpensive. Conclusions: The characteristics of denied handguns are similar to those seen among crime guns. Both groups of guns may reflect the desirability for criminal purposes of pistols, which have larger ammunition capacities than other handguns, and short barrels, which increase their ability to be concealed

    Control of unstable steady states by time-delayed feedback methods

    Full text link
    We show that time-delayed feedback methods, which have successfully been used to control unstable periodic ortbits, provide a tool to stabilize unstable steady states. We present an analytical investigation of the feedback scheme using the Lambert function and discuss effects of both a low-pass filter included in the control loop and non-zero latency times associated with the generation and injection of the feedback signal.Comment: 8 pages, 11 figure

    Trapping of light beams and formation of spatial solitary waves in quadratic nonlinear media

    Get PDF
    Summary form only given. In this paper we report the outcome of our comprehensive investigations to study the dynamics of the beam trapping in both bulk crystals and optical planar waveguides made of quadratic nonlinear media in second-harmonic generation configurations. We address and discuss the suitable experimental conditions required to form spatial solitary waves in critical phase-matching and quasi-phase-matching settings.Peer ReviewedPostprint (published version

    A balloon-borne 1 meter telescope for far-infrared astronomy

    Get PDF
    The flight of a balloon-borne one-meter telescope for infrared astronomy in the wavelength interval of 40 to 240 microns is discussed. The gyro-stabilized telescope mapped the intensity of the far infrared radiation from NGC 7538, Mars, the Orion Nebula, and W3 with a resolution of one minute and from selected regions of these sources with a resolution of 30 seconds. The infrared detection is described and its capabilities are analyzed. The instrumentation, orientation system, and modes of observation of the telescope are defined

    Radiometric responsivity determination for Feature Identification and Location Experiment (FILE) flown on space shuttle mission

    Get PDF
    A procedure was developed to obtain the radiometric (radiance) responsivity of the Feature Identification and Local Experiment (FILE) instrument in preparation for its flight on Space Shuttle Mission 41-G (November 1984). This instrument was designed to obtain Earth feature radiance data in spectral bands centered at 0.65 and 0.85 microns, along with corroborative color and color-infrared photographs, and to collect data to evaluate a technique for in-orbit autonomous classification of the Earth's primary features. The calibration process incorporated both solar radiance measurements and radiative transfer model predictions in estimating expected radiance inputs to the FILE on the Shuttle. The measured data are compared with the model predictions, and the differences observed are discussed. Application of the calibration procedure to the FILE over an 18-month period indicated a constant responsivity characteristic. This report documents the calibration procedure and the associated radiometric measurements and predictions that were part of the instrument preparation for flight
    • …
    corecore