Anodic dissolution growth of metal-organic framework HKUST-1 monitored:Via in situ electrochemical atomic force microscopy

In situ electrochemical atomic force microscopy (ec-AFM) is utilised for the first time to probe the initial stages of metal-organic framework (MOF) coating growth via anodic dissolution. Using the example of the Cu MOF HKUST-1, real time surface analysis is obtained that supports and verifies many of the reaction steps in a previously proposed mechanism for this type of coating growth. No evidence is observed however for the presence or formation of Cu2O, which has previously been suggested to be both key for the formation of the coating and a potential explanation for the anomalously high adhesion strength of coatings obtained via this methodology. Supporting in situ electrochemical Raman spectroscopy also fails to detect the presence of any significant amount of Cu2O before or during the coating's growth process

Aqueous biphasic systems based on ethyl lactate: Molecular interactions and modelling

Aqueous biphasic systems (ABS) based on ethyl lactate are novel green solvent systems that are biorenewable and biodegradable with the potential to replace currently used hazardous organic solvents. Models to correlate and predict binodal curves of these systems are crucial for the design of separation processes but are currently nonexistent. Here, we report the development of two empirical models based on Merchuk’s equation and the Effective Excluded Volume model for ABS composed of ethyl lactate, water and a salt (K3PO4, K2HPO4, K2CO3, Na3C6H5O7, Na2C4H4O6, Na2C4H4O4, K2S2O3, Na2S2O3 and (NH4)2S2O3). Additionally, the use of Artificial Neural Networks (ANN) as a tool to predict binodal curves was explored. An ANN composed of tansig transfer function and five neurons was built using three inputs: mole fraction of salt, molar Gibbs energy of hydration of the salt cation and anion. Furthermore, Fourier-transform infrared-attenuated total reflection spectroscopy was used to reveal the molecular interactions which were used to explain binodal data

Electronic structure design for nanoporous, electrically conductive zeolitic imidazolate frameworks

Electronic structure calculations are used to develop design rules for enhanced electrical conductivity in zeolitic imidazolate frameworks. The electrical resistivity of Co2+ based zeolitic imidazolate frameworks has previously been found to be ∼1000 times lower than that of Zn2+ based materials. The electrical conductivity of the frameworks can also be tuned by ligand molecule selection. Using density functional theory calculations, this controllable electrical conductivity is explained in terms of tuneable conduction band edge character, with calculations revealing the improved hybridisation and extended band character of the Co2+ frameworks. The improvements in the methylimidazolate frameworks are understood in terms of improved frontier orbital matching between metal and ligand. The modular tuneability and previously demonstrated facile synthesis provides a route to rational design of stable framework materials for electronic applications. By outlining these design principles we provide a route to the future development of stable, electrically conductive zeolitic imidazolate frameworks

Electrosynthesis of Co-ZIF Using Bio-Derived Solvents: Electrochemical Evaluation of Synthesised MOFs as a Binder-Free Supercapacitor Electrode in Alkaline Electrolyte

Supercapacitors hold promise for energy storage due to their exceptional power density and fast charge/discharge cycles. However, their performance hinges on the electrode material. Zeolitic imidazolate frameworks (ZIFs) are attractive options due to their tailorable structure and high surface area. But traditional ZIF synthesis relies on toxic solvents derived from fossil fuels, hindering their envisioned environmental benefit. This study explores using bio-derived solvents for a greener and potentially superior approach. The researchers employed anodic electrodeposition to synthesise cobalt-based ZIFs (Co-ZIFs) as supercapacitor electrode materials. Two linkers (2-methylimidazole and benzimidazole) and two bio-derived solvents (CyreneTM and γ-valerolactone (GVL)) were investigated. X-ray diffraction analysis revealed that bio-derived solvents enhanced the crystallinity of Co-ZIFs compared to traditional solvents. Notably, CyreneTM promoted better crystallinity for Co-bIM/Co-mIM structures. The Full Width at Half Maximum (FWHM) analysis suggests CyreneTM promotes Co-bIM/Co-mIM crystallinity (lower FWHM). Co-mIM in CyreneTM exhibits the best crystallinity (FWHM = 0.233) compared to other ZIF samples. Scanning electron microscopy confirmed these findings, showing larger and well-defined crystals for bio-derived solvent-synthesised ZIFs. The choice of solvent significantly impacted the final ZIF structure. While 2-methylimidazole consistently formed ZIF-67 regardless of the solvent, benzimidazole exhibited solvent-dependent behaviour. GVL yielded the highly porous Co-ZIF-12 structure, whereas DMF (N,N-dimethylformamide) and CyreneTM produced the less porous ZIF-9. This work reports the first-ever instance of ZIF-12 synthesis via an electrochemical method, highlighting the crucial interplay between solvent and precursor molecule in determining the final ZIF product. The synthesised binder-free Co-ZIF electrodes were evaluated for supercapacitor performance. The capacitance data revealed GVL as the most effective solvent, followed by DMF and then CyreneTM. This suggests GVL is the preferred choice for this reaction due to its superior performance. The ZIF-12-based electrode exhibits an impressive specific capacitance (Csp) of 44 F g⁻1, significantly higher than those achieved by ZIF-9-Cyrene (1.2 F g⁻1), ZIF-9-DMF (2.5 F g⁻1), ZIF-67-GVL (35 F g⁻1), ZIF-67-Cyrene (6 F g⁻1), and ZIF-67-DMF (16 F g⁻1) at 1 A g−1. This surpasses the Csp of all other ZIFs studied, including high-performing ZIF-67(GVL). ZIF-12(GVL) maintained superior Csp even at higher current densities, demonstrating exceptional rate capability. Among the bio-derived solvents, GVL outperformed CyreneTM. Notably, the Co-bIM in the GVL sample exhibited a ZIF-12-like structure, offering potential advantages due to its larger pores and potentially higher surface area compared to traditional ZIF-67 and ZIF-9 structures. This work presents a significant advancement in Co-ZIF synthesis. By utilising bio-derived solvents, it offers a more sustainable and potentially superior alternative. This paves the way for the eco-friendly production of Co-ZIFs with improved properties for supercapacitors, gas separation, catalysis, and other applications

Measured Solid State and Sub-Cooled Liquid Vapour Pressures of Benzaldehydes Using Knudsen Effusion Mass Spectrometry

Benzaldehydes are components of atmospheric aerosol that are poorly represented in current vapour pressure predictive techniques. In this study the solid state ( and sub-cooled liquid saturation vapour pressures ) were measured over a range of temperatures (298–328 K) for a chemically diverse group of benzaldehydes. The selected benzaldehydes allowed for the effects of varied geometric isomers and functionalities on saturation vapour pressure () to be probed. was measured using Knudsen effusion mass spectrometry (KEMS) and was obtained via a sub-cooled correction utilising experimental enthalpy of fusion and melting point values measured using differential scanning calorimetry (DSC). The strength of the hydrogen bond (H-bond) was the most important factor for determining when a H-bond was present and the polarisability of the compound was the most important factor when a H-bond was not present. Typically compounds capable of hydrogen bonding had 1 to 2 orders of magnitude lower than those that could not H-bond. The were compared to estimated values using three different predictive techniques (Nannoolal et al. vapour pressure method, Myrdal and Yalkowsky method, and SIMPOL). The Nannoolal et al. vapour pressure method and the Myrdal and Yalkowsky method require the use of a boiling point method to predict . For the compounds in this study the Nannoolal et al. boiling point method showed the best performance. All three predictive techniques showed less than an order of magnitude error in on average, however more significant errors were within these methods. Such errors will have important implications for studies trying to ascertain the role of these compounds on aerosol growth and human health impacts. SIMPOL predicted the closest to the experimentally determined values

Anticipating and Managing Future Trade-offs and Complementarities between Ecosystem Services

This paper shows how, with the aid of computer models developed in close collaboration with decision makers and other stakeholders, it is possible to quantify and map how policy decisions are likely to affect multiple ecosystem services in future. In this way, potential trade-offs and complementarities between different ecosystem services can be identified, so that policies can be designed to avoid the worst trade-offs, and where possible, enhance multiple services. The paper brings together evidence from across the Rural Economy and Land Use Programme’s Sustainable Uplands project for the first time, with previously unpublished model outputs relating to runoff, agricultural suitability, biomass, heather cover, age, and utility for Red Grouse (Lagopus scotica), grass cover, and accompanying scenario narratives and video. Two contrasting scenarios, based on policies to extensify or intensify land management up to 2030, were developed through a combination of interviews and discussions during site visits with stakeholders, literature review, conceptual modeling, and process-based computer models, using the Dark Peak of the Peak District National Park in the UK as a case study. Where extensification leads to a significant reduction in managed burning and grazing or land abandonment, changes in vegetation type and structure could compromise a range of species that are important for conservation, while compromising provisioning services, amenity value, and increasing wildfire risk. However, where extensification leads to the restoration of peatlands damaged by former intensive management, there would be an increase in carbon sequestration and storage, with a number of cobenefits, which could counter the loss of habitats and species elsewhere in the landscape. In the second scenario, land use and management was significantly intensified to boost UK self-sufficiency in food. This would benefit certain provisioning services but would have negative consequences for carbon storage and water quality and would lead to a reduction in the abundance of certain species of conservation concern. The paper emphasizes the need for spatially explicit models that can track how ecosystem services might change over time, in response to policy or environmental drivers, and in response to the changing demands and preferences of society, which are far harder to anticipate. By developing such models in close collaboration with decision makers and other stakeholders, it is possible to depict scenarios of real concern to those who need to use the research findings. By engaging these collaborators with the research findings through film, it was possible to discuss adaptive options to minimize trade-offs and enhance the provision of multiple ecosystem services under the very different future conditions depicted by each scenario. By preparing for as wide a range of futures as possible in this way, it may be possible for decision makers to act rapidly and effectively to protect and enhance the provision of ecosystem services in the face of unpredictable future change.Additional co-authors: Nanlin Jin, Brian J Irvine, Mike J Kirkby, William E Kunin, Christina Prell, Claire H Quinn, Bill Slee, Sigrid Stagl, Mette Termansen, Simon Thorp, and Fred Worral

Block copolymer synthesis in ionic liquid via polymerisation-induced self-assembly: A convenient route to gel electrolytes

We report for the first time a reversible addition–fragmentation chain transfer polymerisation-induced self-assembly (RAFT-PISA) formulation in ionic liquid (IL) that yields worm gels. A series of poly(2-hydroxyethyl methacrylate)-b-poly(benzyl methacrylate) (PHEMA-b-PBzMA) block copolymer nanoparticles were synthesised via RAFT dispersion polymerisation of benzyl methacrylate in the hydrophilic IL 1-ethyl-3-methyl imidazolium dicyanamide, [EMIM][DCA]. This RAFT-PISA formulation can be controlled to afford spherical, worm-like and vesicular nano-objects, with free-standing gels being obtained over a broad range of PBzMA core-forming degrees of polymerisation (DPs). High monomer conversions (≥96%) were obtained within 2 hours for all PISA syntheses as determined by 1H NMR spectroscopy, and good control over molar mass was confirmed by gel permeation chromatography (GPC). Nanoparticle morphologies were identified using small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM), and further detailed characterisation was conducted to monitor rheological, electrochemical and thermal characteristics of the nanoparticle dispersions to assess their potential in future electronic applications. Most importantly, this new PISA formulation in IL facilitates the in situ formation of worm ionogel electrolyte materials at copolymer concentrations >4% w/w via efficient and convenient synthesis routes without the need for organic co-solvents or post-polymerisation processing/purification. Moreover, we demonstrate that the worm ionogels developed in this work exhibit comparable electrochemical properties and thermal stability to that of the IL alone, showcasing their potential as gel electrolytes

Metal-organic framework templated electrodeposition of functional gold nanostructures

Utilizing a pair of quick, scalable electrochemical processes, the permanently porous MOF HKUST-1 was electrochemically grown on a copper electrode and this HKUST-1-coated electrode was used to template electrodeposition of a gold nanostructure within the pore network of the MOF. Transmission electron microscopy demonstrates that a proportion of the gold nanostructures exhibit structural features replicating the pore space of this ∼1.4 nm maximum pore diameter MOF, as well as regions that are larger in size. Scanning electron microscopy shows that the electrodeposited gold nanostructure, produced under certain conditions of synthesis and template removal, is sufficiently inter-grown and mechanically robust to retain the octahedral morphology of the HKUST-1 template crystals. The functionality of the gold nanostructure within the crystalline HKUST-1 was demonstrated through the surface enhanced Raman spectroscopic (SERS) detection of 4-fluorothiophenol at concentrations as low as 1 μM. The reported process is confirmed as a viable electrodeposition method for obtaining functional, accessible metal nanostructures encapsulated within MOF crystals

Spatial and Temporal Patterns in Atmospheric Deposition of Dissolved Organic Carbon

Atmospheric deposition of dissolved organic carbon (DOC) to terrestrial ecosystems is a small, but rarely studied component of the global carbon (C) cycle. Emissions of volatile organic compounds (VOC) and organic particulates are the sources of atmospheric C and deposition represents a major pathway for the removal of organic C from the atmosphere. Here, we evaluate the spatial and temporal patterns of DOC deposition using 70 data sets at least one year in length ranging from 40° south to 66° north latitude. Globally, the median DOC concentration in bulk deposition was 1.7 mg L−1. The DOC concentrations were significantly higher in tropical (25°) latitudes. DOC deposition was significantly higher in the tropics because of both higher DOC concentrations and precipitation. Using the global median or latitudinal specific DOC concentrations leads to a calculated global deposition of 202 or 295 Tg C yr−1 respectively. Many sites exhibited seasonal variability in DOC concentration. At temperate sites, DOC concentrations were higher during the growing season; at tropical sites, DOC concentrations were higher during the dry season. Thirteen of the thirty-four long-term (>10 years) data sets showed significant declines in DOC concentration over time with the others showing no significant change. Based on the magnitude and timing of the various sources of organic C to the atmosphere, biogenic VOCs likely explain the latitudinal pattern and the seasonal pattern at temperate latitudes while decreases in anthropogenic emissions are the most likely explanation for the declines in DOC concentration.publishedVersio