18,288 research outputs found
Zinc depolarized electrochemical CO2 concentration
Two zinc depolarized electrochemical carbon dioxide concentrator concepts were analytically and experimentally evaluated for portable life support system carbon dioxide (CO2) removal application. The first concept, referred to as the zinc hydrogen generator electrochemical depolarized CO2 concentrator, uses a ZHG to generate hydrogen for direct use in an EDC. The second concept, referred to as the zinc/electrochemical depolarized concentrator, uses a standard EDC cell construction modified for use with the Zn anode. The Zn anode is consumed and subsequently regenerated, thereby eliminating the need to supply H2 to the EDC for the CO2 removal process. The evaluation was based primarily on an analytical evaluation of the two ZnDCs at projected end item performance and hardware design levels. Both ZnDC concepts for PLSS CO2 removal application were found to be noncompetitive in both total equivalent launch weight and individual extravehicular activity mission volume when compared to other candidate regenerable PLSS CO2 scrubbers
Launch vehicle effluent measurements during the August 20, 1977, Titan 3 launch at Air Force Eastern Test Range
Airborne effluent measurements within the launch cloud and visible and infrared measurements of cloud physical behavior are discussed. Airborne effluent measurements include concentrations of HCl, Cl2, NO, NOX, and particulates as a function of time during each sampling pass through the exhaust cloud. The particle size distribution was measured for each pass through the cloud. Mass concentration as a function of particle diameter was measured over the size range of 0.05- to 25 micron diameter, and particle number density was measured as a function of diameter over a size range of 0.5 to 7.5 micron. Effluent concentrations in the cloud ranged from about 30 ppm several minutes after launch to about 1 to 2 ppm at 100 minutes. Maximum Cl2 concentrations were about 40 to 55 ppb and by 20 minutes were less than 1.0 ppb. A tabulated listing of the airborne data is given in the appendix. Usable cloud imaging data were limited to the first 16 minutes after launch
Regenerative CO2 removal for PLSS application
Various concepts for the design of the nonelectrochemical absorber were defined and evaluated. A preliminary design based on the use of hollow fiber membranes was developed. Small scale bench testing demonstrated the carbon dioxide removal capability and provided design data for scale-up to the one person level. A full scale conceptual design of the absorbent regeneration hardware using six electrochemical cells was also completed. The design was supported by single cell testing and showed that a full scale regeneration system, operating continuously over 24 hours, can regenerate the absorbent from one extravehicular activity mission. The single cell regeneration hardware was operated for over 800 hours
Science after a century at Rhodes University
Rhodes Centenary issueThe small University of Rhodes (6142 students), in the rural city of Grahamstown, was established in 1904 as a result of a £50 000 grant from the Rhodes Trust in Oxford. It grew out of St Andrew’s College, which provided the first four professors and 41 students. The first paper from Rhodes in the South African Journal of Science (then called the Report of the South African Association for the Advancement of Science) was by Selmar Schonland, one of the university’s founding fathers. Entitled: ‘Biological and ethnological observations on a trip to the N.E. Kalahari’, it appeared in 1904. The following pages provide a glimpse into the growth and achievements of various departments in the faculties of Science and Pharmacy and associated institutes a century after the university was born
Field and Laboratory Determination of Soil Properties at Low and High Strains
Over the past quarter century many testing methods have been used to determine soil properties for dynamic analysis. Most methods had been established by the time of the writer\u27s review (Woods, 1978), and since then, changes have been mostly evolutionary. Many field and laboratory techniques are represented in papers submitted to this conference and these are reviewed, but additional citations from literature in the intervening years has been included for completeness. No claim is made that all pertinent literature is included, but that most methods of field and laboratory testing methods are covered with representative citations
Instrument for measuring potentials on two dimensional electric field plots Patent
Instrument for measuring potentials on two dimensional electric field plo
National Geotechnical Experimentation Sites (NGES)
The cost of and time required for site characterization in preparation for field experimentation often exceeds the cost and time of performing the experiment. For this reason alone, there is a need for well characterized field experimentation sites. The additional advantage of being able to compare measurements of so1l and rock parameters by new methods with measurements of the same parameters by other methods in well-known materials is very beneficial to the geotechnical community. Finally, the need to perform full scale earth structure experiments dictates a need for well characterized and user friendly sites where large experiments can be performed. Through the sponsorship of NSF and FHWA, well characterized experimentation fields of this kind now exist at the National Geotechnical Experimentation Sites
One-man electrochemical air revitalization system evaluation
A program to evaluate the performance of a one man capacity, self contained electrochemical air revitalization system was successfully completed. The technology readiness of this concept was demonstrated by characterizing the performance of this one man system over wide ranges in cabin atmospheric conditions. The electrochemical air revitalization system consists of a water vapor electrolysis module to generate oxygen from water vapor in the cabin air, and an electrochemical depolarized carbon dioxide concentrator module to remove carbon dioxide from the cabin air. A control/monitor instrumentation package that uses the electrochemical depolarized concentrator module power generated to partially offset the water vapor electrolysis module power requirements and various structural fluid routing components are also part of the system. The system was designed to meet the one man metabolic oxygen generation and carbon dioxide removal requirements, thereby controlling cabin partial pressure of oxygen at 22 kN/sq m and cabin pressure of carbon dioxide at 400 N/sq m over a wide range in cabin air relative humidity conditions
Launch vehicle effluent measurements during the May 12, 1977, Titan 3 launch at Air Force Eastern Test Range
Airborne effluent measurements and cloud physical behavior for the May 21, 1977, Titan 3 launch from the Air Force Eastern Test Range, Fla. are presented. The monitoring program included airborne effluent measurements in situ in the launch cloud, visible and infrared photography of cloud growth and physical behavior, and limited surface collection of rain samples. Airborne effluent measurements included concentrations of HCl, NO, NOx, and aerosols as a function of time in the exhaust cloud. For the first time in situ particulate mass concentration and aerosol number density were measured as a function of time and size in the size range of 0.05 to 25 micro meters diameter. Measurement results were similar to those of earlier launch monitorings. Maximum HCl and NOx concentrations ranged from 10 ppm and 500 ppb, respectively, several minutes after launch to about 1 ppm and 100 ppb at 45 minutes after launch
- …