1,003 research outputs found
Isobar of an ideal Bose gas within the grand canonical ensemble
We investigate the isobar of an ideal Bose gas confined in a cubic box within
the grand canonical ensemble, for a large yet finite number of particles, N.
After solving the equation of the spinodal curve, we derive precise formulae
for the supercooling and the superheating temperatures which reveal an N^{-1/3}
or N^{-1/4} power correction to the known Bose-Einstein condensation
temperature in the thermodynamic limit. Numerical computations confirm the
accuracy of our analytical approximation, and further show that the isobar
zigzags on the temperature-volume plane if N is greater than or equal to 14393.
In particular, for the Avogadro's number of particles, the volume expands
discretely about 10^5 times. Our results quantitatively agree with a previous
study on the canonical ensemble within 0.1% error.Comment: 6 pages, 2 figures; Reference added. Accepted for publication in
Phys. Rev.
Ultrasonication of Bismuth Telluride Nanocrystals Fabricated by Solvothermal Method
The objective of this study is to evaluate the effect of ultrasonication on bismuth telluride nanocrystals prepared by solvothermal method. In this study, a low dimensional nanocrystal of bismuth telluride (Bi2Te3) was synthesized by a solvothermal process in an autoclave at 180 C and 200 psi. During the solvothermal reaction, organic surfactants effectively prevented unwanted aggregation of nanocrystals in a selected solvent while controlling the shape of the nanocrystal. The atomic ratio of bismuth and tellurium was determined by energy dispersive spectroscopy (EDS). The cavitational energy created by the ultrasonic probe was varied by the ultrasonication process time, while power amplitude remained constant. The nanocrystal size and its size distribution were measured by field emission scanning electron microscopy (FESEM) and a dynamic light scattering system. When the ultrasonication time increased, the average size of bismuth telluride nanocrystal gradually increased due to the direct collision of nanocrystals. The polydispersity of the nanocrystals showed a minimum when the ultrasonication was applied for 5 min. Keywords: bismuth telluride, nanocrystal, low-dimensional, ultrasonication, solvotherma
Recommended from our members
Evaluation of simulated O-3 production efficiency during the KORUS-AQ campaign: Implications for anthropogenic NOx emissions in Korea
We examine O3 production and its sensitivity to precursor gases and boundary layer mixing in Korea by using a 3-D global chemistry transport model and extensive observations during the KORea-US cooperative Air Quality field study in Korea, which occurred in May–June 2016. During the campaign, observed aromatic species onboard the NASA DC-8 aircraft, especially toluene, showed high mixing ratios of up to 10 ppbv, emphasizing the importance of aromatic chemistry in O3 production. To examine the role of VOCs and NOx in O3 chemistry, we first implement a detailed aromatic chemistry scheme in the model, which reduces the normalized mean bias of simulated O3 mixing ratios from –26% to –13%. Aromatic chemistry also increases the average net O3 production in Korea by 37%. Corrections of daytime PBL heights, which are overestimated in the model compared to lidar observations, increase the net O3 production rate by ~10%. In addition, increasing NOx emissions by 50% in the model shows best performance in reproducing O3 production characteristics, which implies that NOx emissions are underestimated in the current emissions inventory. Sensitivity tests show that a 30% decrease in anthropogenic NOx emissions in Korea increases the O3 production efficiency throughout the country, making rural regions ~2 times more efficient in producing O3 per NOx consumed. Simulated O3 levels overall decrease in the peninsula except for urban and other industrial areas, with the largest increase (~6 ppbv) in the Seoul Metropolitan Area (SMA). However, with simultaneous reductions in both NOx and VOCs emissions by 30%, O3 decreases in most of the country, including the SMA. This implies the importance of concurrent emission reductions for both NOx and VOCs in order to effectively reduce O3 levels in Korea
High altitude airship configuration and power technology and method for operation of same
A new High Altitude Airship (HAA) capable of various extended applications and mission scenarios utilizing inventive onboard energy harvesting and power distribution systems. The power technology comprises an advanced thermoelectric (ATE) thermal energy conversion system. The high efficiency of multiple stages of ATE materials in a tandem mode, each suited for best performance within a particular temperature range, permits the ATE system to generate a high quantity of harvested energy for the extended mission scenarios. When the figure of merit 5 is considered, the cascaded efficiency of the three-stage ATE system approaches an efficiency greater than 60 percent
UVB Induces HIF-1α-Dependent TSLP Expression via the JNK and ERK Pathways
Thymic stromal lymphopoietin (TSLP) may have a key role in the initiation and maintenance of allergic inflammatory diseases, including atopic dermatitis. The present study revealed that UVB radiation exposure could induce TSLP expression in human keratinocytes and a human skin equivalent model. In addition, we investigated the regulatory mechanism of UVB-induced TSLP expression in keratinocytes. TSLP expression was upregulated by transfection with pcDNA3–hypoxia-inducible factor (HIF)-1α (P402A and P564A), which stably expresses HIF-1α protein. UVB-induced TSLP induction in keratinocytes was suppressed in the treatment of mitogen-activated protein kinase inhibitors or small interfering RNAs against HIF-1α. The results of chromatin immunoprecipitation assays indicate the direct involvement of HIF-1α in UVB-mediated TSLP induction. Taken together, these findings indicate that UVB exposure may increase TSLP expression through a HIF-1α-dependent mechanism via the c-JUN N-terminal kinase and extracellular signal-regulated kinase pathways in human keratinocytes. Our data showed that UVB-induced TSLP might increase secretion of the T-helper type 2–attracting chemokine (c–c motif) ligand 17 by human dendritic cells. The present study suggests an important role of HIF-1α in UVB-mediated immune response in keratinocytes
Thermoelectric Energy Conversion Technology for High-Altitude Airships
The High Altitude Airship (HAA) has various application potential and mission scenarios that require onboard energy harvesting and power distribution systems. The power technology for HAA maneuverability and mission-oriented applications must come from its surroundings, e.g. solar power. The energy harvesting system considered for HAA is based on the advanced thermoelectric (ATE) materials being developed at NASA Langley Research Center. The materials selected for ATE are silicon germanium (SiGe) and bismuth telluride (Bi2Te3), in multiple layers. The layered structure of the advanced TE materials is specifically engineered to provide maximum efficiency for the corresponding range of operational temperatures. For three layers of the advanced TE materials that operate at high, medium, and low temperatures, correspondingly in a tandem mode, the cascaded efficiency is estimated to be greater than 60 percent
Transmission Electron Microscopy (TEM) Sample Preparation of Si(1-x)Gex in c-Plane Sapphire Substrate
The National Aeronautics and Space Administration-invented X-ray diffraction (XRD) methods, including the total defect density measurement method and the spatial wafer mapping method, have confirmed super hetero epitaxy growth for rhombohedral single crystalline silicon germanium (Si1-xGex) on a c-plane sapphire substrate. However, the XRD method cannot observe the surface morphology or roughness because of the method s limited resolution. Therefore the authors used transmission electron microscopy (TEM) with samples prepared in two ways, the focused ion beam (FIB) method and the tripod method to study the structure between Si1-xGex and sapphire substrate and Si1?xGex itself. The sample preparation for TEM should be as fast as possible so that the sample should contain few or no artifacts induced by the preparation. The standard sample preparation method of mechanical polishing often requires a relatively long ion milling time (several hours), which increases the probability of inducing defects into the sample. The TEM sampling of the Si1-xGex on sapphire is also difficult because of the sapphire s high hardness and mechanical instability. The FIB method and the tripod method eliminate both problems when performing a cross-section TEM sampling of Si1-xGex on c-plane sapphire, which shows the surface morphology, the interface between film and substrate, and the crystal structure of the film. This paper explains the FIB sampling method and the tripod sampling method, and why sampling Si1-xGex, on a sapphire substrate with TEM, is necessary
Development and Validation of a Prediction Model for Stroke, Cardiac, and Mortality Risk After Non-Cardiac Surgery.
Background: Commonly used cardiovascular risk calculators do not provide risk estimation of stroke, a major postoperative complication with high morbidity and mortality. We developed and validated an accurate cardiovascular risk prediction tool for stroke, major cardiac complications (myocardial infarction or cardiac arrest), and mortality after non-cardiac surgery.
Methods and Results: This retrospective cohort study included 1 165 750 surgical patients over a 4-year period (2007-2010) from the American College of Surgeons National Surgical Quality Improvement Program Database. A predictive model was developed with the following preoperative conditions: age, history of coronary artery disease, history of stroke, emergency surgery, preoperative serum sodium (≤130 mEq/L, \u3e146 mEq/L), creatinine \u3e1.8 mg/dL, hematocrit ≤27%, American Society of Anesthesiologists physical status class, and type of surgery. The model was trained using American College of Surgeons National Surgical Quality Improvement Program data from 2007 to 2009 (n=809 880) and tested using data from 2010 (n=355 870). Risk models were developed using multivariate logistic regression. The outcomes were postoperative 30-day stroke, major cardiovascular events (myocardial infarction, cardiac arrest, or stroke), and 30-day mortality. Major cardiac complications occurred in 0.66% (n=5332) of patients (myocardial infarction, 0.28%; cardiac arrest, 0.41%), postoperative stroke in 0.25% (n=2005); 30-day mortality was 1.66% (n=13 484). The risk prediction model had high predictive accuracy with area under the receiver operating characteristic curve for stroke (training cohort=0.869, validation cohort=0.876), major cardiovascular events (training cohort=0.871, validation cohort=0.868), and 30-day mortality (training cohort=0.922, validation cohort=0.925). Surgery types, history of stroke, and coronary artery disease are significant risk factors for stroke and major cardiac complications.
Conclusions: Postoperative stroke, major cardiac complications, and 30-day mortality can be predicted with high accuracy using this web-based predictive model
- …