Production of Fusaric Acid by Fusarium spp. in Pure Culture and in Solid Medium Co-Cultures.

The ability of fungi isolated from nails of patients suffering from onychomycosis to induce de novo production of bioactive compounds in co-culture was examined. Comparison between the metabolite profiles produced by Sarocladium strictum, by Fusarium oxysporum, and by these two species in co-culture revealed de novo induction of fusaric acid based on HRMS. Structure confirmation of this toxin, using sensitive microflow NMR, required only three 9-cm Petri dishes of fungal culture. A targeted metabolomics study based on UHPLC-HRMS confirmed that the production of fusaric acid was strain-dependent. Furthermore, the detected toxin levels suggested that onychomycosis-associated fungal strains of the F. oxysporum and F. fujikuroi species complexes are much more frequently producing fusaric acid, and in higher amount, than strains of the F. solani species complex. Fusarium strains producing no significant amounts of this compound in pure culture, were shown to de novo produce that compound when grown in co-culture. The role of fusaric acid in fungal virulence and defense is discussed

Metabolomics reveals biomarkers in human urine and plasma to predict cytochrome P450 2D6 (CYP2D6) activity.

Individualized assessment of cytochrome P450 2D6 (CYP2D6) activity is usually performed through phenotyping following administration of a probe drug to measure the enzyme's activity. To avoid any iatrogenic harm (allergic drug reaction, dosing error) related to the probe drug, the development of non-burdensome tools for real-time phenotyping of CYP2D6 could significantly contribute to precision medicine. This study focuses on the identification of markers of the CYP2D6 enzyme in human biofluids using an LC-high-resolution mass spectrometry-based metabolomic approach. Plasma and urine samples from healthy volunteers were analysed before and after intake of a daily dose of paroxetine 20 mg over 7 days. CYP2D6 genotyping and phenotyping, using single oral dose of dextromethorphan 5 mg, were also performed in all participants. We report four metabolites of solanidine and two unknown compounds as possible novel CYP2D6 markers. Mean relative intensities of these features were significantly reduced during the inhibition session compared with the control session (n = 37). Semi-quantitative analysis showed that the largest decrease (-85%) was observed for the ion m/z 432.3108 normalized to solanidine (m/z 398.3417). Mean relative intensities of these ions were significantly higher in the CYP2D6 normal-ultrarapid metabolizer group (n = 37) compared with the poor metabolizer group (n = 6). Solanidine intensity was more than 15 times higher in CYP2D6-deficient individuals compared with other volunteers. The applied untargeted metabolomic strategy identified potential novel markers capable of semi-quantitatively predicting CYP2D6 activity, a promising discovery for personalized medicine

Identification and Mode of Action of a Plant Natural Product Targeting Human Fungal Pathogens.

<i>Candida albicans</i> is a major cause of fungal diseases in humans, and its resistance to available drugs is of concern. In an attempt to identify novel antifungal agents, we initiated a small-scale screening of a library of 199 natural plant compounds (i.e., natural products [NPs]). <i>In vitro</i> susceptibility profiling experiments identified 33 NPs with activity against <i>C. albicans</i> (MIC <sub>50</sub> s ≤ 32 μg/ml). Among the selected NPs, the sterol alkaloid tomatidine was further investigated. Tomatidine originates from the tomato ( <i>Solanum lycopersicum</i> ) and exhibited high levels of fungistatic activity against <i>Candida</i> species (MIC <sub>50</sub> s ≤ 1 μg/ml) but no cytotoxicity against mammalian cells. Genome-wide transcriptional analysis of tomatidine-treated <i>C. albicans</i> cells revealed a major alteration (upregulation) in the expression of ergosterol genes, suggesting that the ergosterol pathway is targeted by this NP. Consistent with this transcriptional response, analysis of the sterol content of tomatidine-treated cells showed not only inhibition of Erg6 (C-24 sterol methyltransferase) activity but also of Erg4 (C-24 sterol reductase) activity. A forward genetic approach in <i>Saccharomyces cerevisiae</i> coupled with whole-genome sequencing identified 2 nonsynonymous mutations in <i>ERG6</i> (amino acids D249G and G132D) responsible for tomatidine resistance. Our results therefore unambiguously identified Erg6, a C-24 sterol methyltransferase absent in mammals, to be the main direct target of tomatidine. We tested the <i>in vivo</i> efficacy of tomatidine in a mouse model of <i>C. albicans</i> systemic infection. Treatment with a nanocrystal pharmacological formulation successfully decreased the fungal burden in infected kidneys compared to the fungal burden achieved by the use of placebo and thus confirmed the potential of tomatidine as a therapeutic agent

Normal phase HPLC profiling of the acetylcholinesterase activity in apolar plant extracts

Among nineteen evaluated Clusiaceous species, one stem bark CH2Cl2 crude extract was selected based on a significant inhibition of acetylcholinesterase (AChE) using the micro-dilution Ellman\u27s method [1]. A normal phase HPLC profiling with micro-fractionation of this extract provided discrete fractions every 20 seconds. In order to obtain a comprehensive profiling of AChE activity all microfractions were tested [2] in dilution assay (Ellman) as well as by bioautography (the Fast Blue B salt method). Furthermore the potency of inhibition was evaluated both by keeping the genuine concentration within the extract and after normalisation to a standard concentration level. From the active fractions five pure compounds were isolated and identified. The different methods of sample preparation and biological evaluation associated with normal-phase micro-fractionation of plant extracts are critically discussed

Determination of trace amounts of ginkgolic acids in Ginkgo biloba L. leaf extracts and phytopharmaceuticals by liquid chromatography-electrospray mass spectrometry.

Ginkgolic acids (GAs) are toxic phenolic compounds present in the fruits and leaves of Ginkgo biloba L. (Ginkgoacae). Their maximum level in phytopharmaceuticals containing ginkgo extracts has been recently restricted to 5 microg/g by the Commission E of the former Federal German Health Authority. In order to detect ginkgolic acids at these low levels, a sensitive and selective analytical method, based on liquid chromatography-electrospray mass spectrometry (LC-ES-MS) has been developed. The three main phenolic acids (1-3) of the chloroform fruit extract were isolated and used as standards for quantification. In the LC-ES-MS negative ion mode, calibration curves with good linearities (r=0.9973, n=6) were obtained in the range of 0.5-10 microg/g for compounds 1, 2 and between 0.1 and 7.5 microg/g (r=0.9949, n=6) for ginkgolic acid 3. The detection limits at a SIN ratio of 3 were 0.1 (3) and 0.25 microg/g (1, 2). Recoveries were around 101% at 5 microg/g for the substances detected in the leaf extracts. Good precision was achieved with relative standard deviations of less than 4% (n=6). The optimised method was applied to verify whether the amount of gingkolic acids was below 5 microg/g in a standardised leaf extract which is a constituent of a phytopreparation

Rapid detection and subsequent isolation of bioactive constituents of crude plant extracts.

Rapid detection of biologically active natural products plays a strategic role in the phytochemical investigation of crude plant extracts. In order to perform an efficient screening of the extracts, both biological assays and HPLC analysis with various detection methods are used. Combined techniques such as HPLC coupled to UV photodiode array detection (LC/UV) and to mass spectrometry (LC/MS or LC/MS/MS) provide useful structural information on the metabolites on-line prior to isolation. The recent introduction of HPLC coupled to nuclear magnetic resonance (LC/NMR) represents a powerful complement to the LC/UV/MS screening. Various plants belonging to the Gentianaceae and Leguminosae families have been analysed by LC/UV, LC/MS, LC/MS/MS, and LC/NMR. The use of all these coupled techniques allows the structural determination of known plant constituents rapidly and with only a minute amount of plant material. With such an approach, the time-consuming isolation of common natural products is avoided and an efficient targeted isolation of compounds presenting interesting chemical or biological features can be performed

Antifungal and antibacterial chalcones from Myrica serrata.

The dichloromethane extract of the leaves of Myrica serrata inhibits growth of Cladosporium cucumerinum, Bacillus subtilis, and Escherichia coli on TLC plates. Activity-guided fractionation led the isolation of 2',4'-dihydroxy-6'-methoxy-3',5'-dimethylchalcone (1), 2',4'-dihydroxy-6'-methoxy-5'-methylchalcone (aurentiacin A) (2), 2',6'-dihydroxy-4'-methoxy-3',5'-dimethyldihydrochalcone (3), 2'-hydroxy-4',6'-dimethoxy-3'-methyldihydrochalcone (4), and 2', 6'-dihydroxy-4'-methoxy-3'-methyldihydrochalcone (5). In addition, the flavanones demethoxymatteucinol (6) and cryptostrobin (7) were also identified

Some solutions to obtain very efficient separations in isocratic and gradient modes using small particles size and ultra-high pressure.

The UHPLC strategy which combines sub-2 microm porous particles and ultra-high pressure (>1000 bar) was investigated considering very high resolution criteria in both isocratic and gradient modes, with mobile phase temperatures between 30 and 90 degrees C. In isocratic mode, experimental conditions to reach the maximal efficiency were determined using the kinetic plot representation for DeltaP(max)=1000 bar. It has been first confirmed that the molecular weight of the compounds (MW) was a critical parameter which should be considered in the construction of such curves. With a MW around 1000 g mol(-1), efficiencies as high as 300,000 plates could be theoretically attained using UHPLC at 30 degrees C. By limiting the column length to 450 mm, the maximal plate count was around 100,000. In gradient mode, the longest column does not provide the maximal peak capacity for a given analysis time in UHPLC. This was attributed to the fact that peak capacity is not only related to the plate number but also to column dead time. Therefore, a compromise should be found and a 150 mm column should be preferentially selected for gradient lengths up to 60 min at 30 degrees C, while the columns coupled in series (3x 150 mm) were attractive only for t(grad)>250 min. Compared to 30 degrees C, peak capacities were increased by about 20-30% for a constant gradient length at 90 degrees C and gradient time decreased by 2-fold for an identical peak capacity