Nearwork-induced transient myopia in preadolescent Hong Kong Chinese

PURPOSE. To compare the magnitude and time course of nearwork-induced transient myopia (NITM) in preadolescent Hong Kong Chinese myopes and emmetropes. METHOD. Forty-five Hong Kong Chinese children, 35 myopes and 10 emmetropes aged 6 to 12 years (median, 7.5), monocularly viewed a letter target through a Badal lens for 5 minutes at either 5.00- or 2.50-D accommodative demand, followed by 3 minutes of viewing the equivalent target at optical infinity. Accommodative responses were measured continuously with a modified, infrared, objective open-field autorefractor. Accommodative responses were also measured for a countercondition: viewing of a letter target for 5 minutes at optical infinity, followed by 3 minutes of viewing the target at a 5.00-D accommodative demand. The results were compared with tonic accommodation and both subject and family history of refractive error. RESULTS. Retinal-blur-driven NITM was significantly greater in Hong Kong Chinese children with myopic vision than in the emmetropes after both near tasks, but showed no significant dose effect. The NITM was still evident 3 minutes after viewing the 5.00-D near task for 5 minutes. The magnitude of NITM correlated with the accommodative drift after viewing a distant target for more than 4 minutes, but was unrelated to the subjects' or family history of refractive error. CONCLUSIONS. In a preadolescent ethnic population with known predisposition to myopia, there is a significant posttask blur-driven accommodative NITM, which is sustained for longer than has previously been found in white adults

Three-dimensional printing of patient-specific surgical plates in head and neck reconstruction: A prospective pilot study

Background Surgical plates have been extensively used in head and neck reconstruction and conventional plates are mass-produced with universal configurations. To overcome disadvantages of conventional surgical plates, we have been exploring patient-specific surgical plates using the three-dimensional (3D) printing technology. We hypothesized that the application of 3D-printed patient-specific surgical plates in head and neck reconstruction is feasible, safe and precise. Methods We are conducting a prospective clinical trial to assess the feasibility, safety and accuracy of applying 3D-printed patient-specific surgical plates in head and neck reconstruction. The primary endpoint was the intraoperative success rate. Secondary endpoints included the incidence and severity of postoperative adverse events within six months postoperatively. The accuracy of surgical outcomes was also explored by comparing the planned and final positions of the maxilla, mandible and grafted bone segments. Results From December 2016 to October 2017, ten patients were enrolled and underwent head and neck reconstruction using 3D-printed patient-specific surgical plates. The patient-specific surgical plates adapted to bone surface precisely and no plate-bending was performed. The intraoperative success rate was 100%. The average follow-up period was 6.5 months. No major adverse events were observed. The mean absolute distance deviation of integral mandible or maxilla was 1.40 ± 0.63 mm, which showed a high accuracy of reconstruction. Conclusions The 3D printing of patient-specific surgical plates could be effective in head and neck reconstruction. Surgical procedures were simplified. The precise jaw reconstruction was achieved with high accuracy. Long-term results with a larger sample size are warranted to support a final conclusion. The study protocol has been registered in ClinicalTrials.gov with a No. of NCT03057223

A Systematic Approach for Making 3D-Printed Patient-Specific Implants for Craniomaxillofacial Reconstruction

Craniomaxillofacial reconstruction implants, which are extensively used in head and neck surgery, are conventionally made in standardized forms. During surgery, the implant must be bended manually to match the anatomy of the individual bones. The bending process is time-consuming, especially for inexperienced surgeons. Moreover, repetitive bending may induce undesirable internal stress concentration, resulting in fatigue under masticatory loading in vivo and causing various complications such as implant fracture, screw loosening, and bone resorption. There have been reports on the use of patient-specific 3D-printed implants for craniomaxillofacial reconstruction, although few reports have considered implant quality. In this paper, we present a systematic approach for making 3D-printed patient-specific surgical implants for craniomaxillofacial reconstruction. The approach consists of three parts: First, an easy-to-use design module is developed using Solidworks® software, which helps surgeons to design the implants and the axillary fixtures for surgery. Design engineers can then carry out the detailed design and use finite-element modeling (FEM) to optimize the design. Second, the fabrication process is carried out in three steps: ① testing the quality of the powder; ② setting up the appropriate process parameters and running the 3D printing process; and ③ conducting post-processing treatments (i.e., heat and surface treatments) to ensure the quality and performance of the implant. Third, the operation begins after the final checking of the implant and sterilization. After the surgery, postoperative rehabilitation follow-up can be carried out using our patient tracking software. Following this systematic approach, we have successfully conducted a total of 41 surgical cases. 3D-printed patient-specific implants have a number of advantages; in particular, their use reduces surgery time and shortens patient recovery time. Moreover, the presented approach helps to ensure implant quality

Malaysian brown macroalga Padina australis mitigates lipopolysaccharide-stimulated neuroinflammation in BV2 microglial cells

Objective(s): Neuroinflammation and microglial activation are pathological features in central nervous system disorders. Excess levels of reactive oxygen species (ROS) and pro-inflammatory cytokines have been implicated in exacerbation of neuronal damage during chronic activation of microglial cells. Padina australis, a brown macroalga, has been demonstrated to have various pharmacological properties such as anti-neuroinflammatory activity. However, the underlying mechanism mediating the anti-neuroinflammatory potential of P. australis remains poorly understood. We explored the use of Malaysian P. australis in attenuating lipopolysaccharide (LPS)-stimulated neuroinflammation in BV2 microglial cells. Materials and Methods: Fresh specimens of P. australis were freeze-dried and subjected to ethanol extraction. The ethanol extract (PAEE) was evaluated for its protective effects against 1 µg/ml LPS-stimulated neuroinflammation in BV2 microglial cells. Results: LPS reduced the viability of BV2 microglia cells and increased the levels of nitric oxide (NO), prostaglandin E2 (PGE2), intracellular reactive oxygen species (ROS), inducible nitric oxide synthase (iNOS), cyclooxygenase-2 (COX-2), tumor necrosis factor-alpha (TNF-α), and interleukin-6 (IL-6). However, the neuroinflammatory response was reversed by 0.5–2.0 mg/ml PAEE in a dose-dependent manner. Analysis of liquid chromatography-mass spectrometry (LC-MS) of PAEE subfractions revealed five compounds; methyl α-eleostearate, ethyl α-eleostearate, niacinamide, stearamide, and linoleic acid. Conclusion: The protective effects of PAEE against LPS-stimulated neuroinflammation in BV2 microglial cells were found to be mediated by the suppression of excess levels of intracellular ROS and pro-inflammatory mediators and cytokines, denoting the protective role of P. australis in combating continuous neuroinflammation. Our findings support the use of P. australis as a possible therapeutic for neuroinflammatory and neurodegenerative diseases

Handgrip strength assessment at baseline in addition to bone parameters could potentially predict the risk of curve progression in adolescent idiopathic scoliosis

IntroductionAdolescent idiopathic scoliosis (AIS) is characterized by deranged bone and muscle qualities, which are important prognostic factors for curve progression. This retrospective case–control study aims to investigate whether the baseline muscle parameters, in addition to the bone parameters, could predict curve progression in AIS.MethodsThe study included a cohort of 126 female patients diagnosed with AIS who were between the ages of 12 and 14 years old at their initial clinical visit. These patients were longitudinally followed up every 6 months (average 4.08 years) until they reached skeletal maturity. The records of these patients were thoroughly reviewed as part of the study. The participants were categorized into two sub-groups: the progressive AIS group (increase in Cobb angle of ≥6°) and the stable AIS group (increase in Cobb angle <6°). Clinical and radiological assessments were conducted on each group.ResultsCobb angle increase of ≥6° was observed in 44 AIS patients (34.9%) prior to skeletal maturity. A progressive AIS was associated with decreased skeletal maturity and weight, lower trunk lean mass (5.7%, p = 0.027) and arm lean mass (8.9%, p < 0.050), weaker dominant handgrip strength (8.8%, p = 0.027), deranged cortical compartment [lower volumetric bone mineral density (vBMD) by 6.5%, p = 0.002], and lower bone mechanical properties [stiffness and estimated failure load lowered by 13.2% (p = 0.005) and 12.5% (p = 0.004)]. The best cut-off threshold of maximum dominant handgrip strength is 19.75 kg for distinguishing progressive AIS from stable AIS (75% sensitivity and 52.4% specificity, p = 0.011).DiscussionPatients with progressive AIS had poorer muscle and bone parameters than patients with stable AIS. The implementation of a cut-off threshold in the baseline dominant handgrip strength could potentially be used as an additional predictor, in addition to bone parameters, for identifying individuals with AIS who are at higher risk of experiencing curve progression

Surveillance of febrile patients in a district and evaluation of their spatiotemporal associations: a pilot study

<p>Abstract</p> <p>Background</p> <p>Fever is an undifferentiated clinical feature that may enhance the sensitivity of syndromic surveillance systems. By studying the spatiotemporal associations of febrile patients, it may allow early detection of case clustering that indicates imminent threat of infectious disease outbreaks in the community.</p> <p>Methods</p> <p>We captured consecutive emergency department visits that led to hospitalization in a district hospital in Hong Kong during the period of 12 Sep 2005 to 14 Oct 2005. We recorded demographic data, provisional diagnoses, temperature on presentation and residential location for each patient-episode, and geocoded the residential addresses. We applied Geographical Information System technology to study the geographical distribution these cases, and their associations within a 50-m buffer zone spatially. A case cluster was defined by three or more spatially associated febrile patients within each three consecutive days.</p> <p>Results</p> <p>One thousand and sixty six patient-episodes were eligible for analysis; 42% of them had fever (>37°C; oral temperature) on presentation. Two hundred and four patient-episodes (19.1%) came from residential care homes for elderly (RCHE). We detected a total of 40 case clusters during the study period. Clustered cases were of older age; 57 (33.3%) were residents of RCHE. We found a median of 3 patients (range: 3 - 8) and time span of 3 days (range: 2 - 8 days) in each cluster. Twenty five clusters had 2 or more patients living in the same building block; 18 of them were from RCHE.</p> <p>Conclusions</p> <p>It is technically feasible to perform surveillance on febrile patients and studying their spatiotemporal associations. The information is potentially useful for early detection of impending infectious disease threats.</p

US Cosmic Visions: New Ideas in Dark Matter 2017: Community Report

This white paper summarizes the workshop "U.S. Cosmic Visions: New Ideas in Dark Matter" held at University of Maryland on March 23-25, 2017.Comment: 102 pages + reference

Effect of Anti-Obesity Drug on Cardiovascular Risk Factors: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

BACKGROUND: Anti-obesity drugs are widely used to prevent the complications of obesity, however, the effects of anti-obesity drugs on cardiovascular risk factors are unclear at the present time. We carried out a comprehensively systematic review and meta-analysis to assess the effects of anti-obesity drugs on cardiovascular risk factors. METHODOLOGY AND PRINCIPAL FINDINGS: We systematically searched Medline, EmBase, the Cochrane Central Register of Controlled Trials, reference lists of articles and proceedings of major meetings for relevant literatures. We included randomized placebo-controlled trials that reported the effects of anti-obesity drugs on cardiovascular risk factors compared to placebo. Overall, orlistat produced a reduction of 2.39 kg (95%CI-3.34 to -1.45) for weight, a reduction of 0.27 mmol/L (95%CI: -0.36 to -0.17) for total cholesterol, a reduction of 0.21 mmol/L (95%CI: -0.30 to -0.12) for LDL, a reduction of 0.12 mmol/L (95%CI: -0.20 to -0.04) for fasting glucose, 1.85 mmHg reduction (95%CI: -3.30 to -0.40) for SBP, and a reduction of 1.49 mmHg (95%CI: -2.39 to -0.58) for DBP. Sibutramine only showed effects on weight loss and triglycerides reduction with statistical significances. Rimonabant was associated with statistically significant effects on weight loss, SBP reduction and DBP reduction. No other significantly different effects were identified between anti-obesity therapy and placebo. CONCLUSION/SIGNIFICANCE: We identified that anti-obesity therapy was associated with a decrease of weight regardless of the type of the drug. Orlistat and rimonabant could lead to an improvement on cardiovascular risk factors. However, Sibutramine may have a direct effect on cardiovascular risk factors

The association of RANTES polymorphism with severe acute respiratory syndrome in Hong Kong and Beijing Chinese

<p>Abstract</p> <p>Background</p> <p>Chemokines play important roles in inflammation and antiviral action. We examined whether polymorphisms of <it>RANTES, IP-10 </it>and <it>Mig </it>affect the susceptibility to and outcome of severe acute respiratory syndrome (SARS).</p> <p>Methods</p> <p>We tested the polymorphisms of <it>RANTES, IP-10 </it>and <it>Mig </it>for their associations with SARS in 495 Hong Kong Chinese SARS patients and 578 controls. Then we tried to confirm the results in 356 Beijing Chinese SARS patients and 367 controls.</p> <p>Results</p> <p><it>RANTES </it>-28 G allele was associated with SARS susceptibility in Hong Kong Chinese (<it>P </it>< 0.0001, OR = 2.80, 95%CI:2.11–3.71). Individuals with <it>RANTES </it>-28 CG and GG genotypes had a 3.28-fold (95%CI:2.32–4.64) and 3.06-fold (95%CI:1.47–6.39) increased risk of developing SARS respectively (<it>P </it>< 0.0001). This -28 G allele conferred risk of death in a gene-dosage dependent manner (<it>P </it>= 0.014) with CG and GG individuals having a 2.12-fold (95% CI: 1.11–4.06) and 4.01-fold (95% CI: 1.30–12.4) increased risk. For the replication of <it>RANTES </it>data in Beijing Chinese, the -28 G allele was not associated with susceptibility to SARS. However, -28 CG (OR = 4.27, 95%CI:1.64–11.1) and GG (OR = 3.34, 95%CI:0.37–30.7) were associated with admission to intensive care units or death due to SARS (<it>P </it>= 0.011).</p> <p>Conclusion</p> <p><it>RANTES </it>-28 G allele plays a role in the pathogenesis of SARS.</p