Predicting the cost of a 24 V soluble lead flow battery optimised for PV applications

Providing reliable electricity from small-scale renewable power is an important challenge for emerging economies. The soluble lead flow battery (SLFB) is a promising battery for this application, as it has a simple architecture making it relatively robust, and a lifetime of 2000 cycles demonstrated at the cell level. Also, the electrolyte is manufacturable directly from spent lead acid batteries. There is a need for techno-economic models to allow the cost/performance of a complete system to be defined and optimised. Such a model is defined here for the first time and used in a multi-objective optimisation to design a 24 V system for a charging hub in Sierra Leone. A 4 h duration was found to be optimal, and electrolyte for a 3.5 kW/14 kWh system would fit in a 1000 L IBC. Methanesulfonic acid was found to be the largest cost component of the 4 h system, with graphitic bipolar plates next. Both have low raw material costs, and in an optimistic scenario a total component cost of <£50/kWh would be achieved, half that of current NMC Li-ion cells. The greatest technical risk to achieving low cost is deposit thickness of lead dioxide. This important research gap should be addressed

Strawberry fruit resistance to simulated handling

Harvest operations are currently the main source of mechanical injury of strawberry (Fragaria x ananassa Duch.). Experiments were designed to simulate conditions encountered during commercial handling. Individual fruits were subjected to impact or compression forces with similar energy to determine the sensitivity to mechanical injury. Bruise volume was used as the measurement of injury. Bruise severity increased as a function of impact energy for both impact types. However, dropped fruits had larger bruise volume than fruits submitted to pendulum impactor at the same energy level. Doubling the impact energy (0.040 to 0.083 J) increased bruise volume by 7 times (13 to 91 mm³). Fruits dropped from 380 mm (0.075 J) showed 71% greater bruise volume than those dropped from either 130 mm (0.025 J) or 200 mm (0.040 J). Compressed fruits showed higher bruise volume than other tests. Some cultivars are more susceptible to compression forces than others. 'Sweet Charlie' berries showed bruise volume 40% higher than the others cultivars when subjected to compression. Fruits subjected to impact showed bruise volume lower than the compressed fruits, indicating the possibility to be handled and graded in a packing line.A etapa de colheita é a principal fonte de danos físicos ao morango (Fragaria x ananassa Duch.). Experimentos foram realizados para simular condições encontradas durante manuseio. Frutos foram submetidos individualmente às forças de impacto e compressão em energias similares para determinar sensibilidade dos frutos a danos físicos. Volume da injúria física foi utilizado para mensurar a incidência do dano físico ocorrido. Severidade da lesão aumenta, com incremento da energia, tanto para força de impacto como para compressão. Todavia, frutos submetidos à queda livre demonstraram maiores volumes de danos físicos do que frutos submetidos a danos ocasionados por pendulo no mesmo nível de energia. Dobrando a energia de impacto (0,040 para 0,083 J) ocorreu aumento no volume da injúria em sete vezes (13 para 91 mm³). Frutos submetidos à queda de 380 mm (0,075 J) demonstraram volumes de danos físicos 71% superiores do que aqueles ocasionados em queda de 130 mm (0,025 J) ou 200 mm (0,040 J). Frutos em teste de compressão mostraram maiores volumes de injúrias físicas do que outros testes. Alguns cultivares são mais sensíveis à força de compressão do que outros. Frutos cultivar 'Sweet Charlie' apresentaram volume de injúria 40% superiores do que outros quando submetidos à força de compressão. Morangos submetidos à força de impacto demonstraram volume de injúria inferior do que aqueles comprimidos, indicando a possibilidade dos morangos serem classificados e manuseados em uma linha de beneficiamento

Susceptibility and dilution effects of the kagome bi-layer geometrically frustrated network. A Ga-NMR study of SrCr_(9p)Ga_(12-9p)O_(19)

We present an extensive gallium NMR study of the geometrically frustrated kagome bi-layer compound SrCr_(9p)Ga_(12-9p)O_(19) (Cr^3+, S=3/2) over a broad Cr-concentration range (.72<p<.95). This allows us to probe locally the kagome bi-layer susceptibility and separate the intrinsic properties due to the geometric frustration from those related to the site dilution. Our major findings are: 1) The intrinsic kagome bi-layer susceptibility exhibits a maximum in temperature at 40-50 K and is robust to a dilution as high as ~20%. The maximum reveals the development of short range antiferromagnetic correlations; 2) At low-T, a highly dynamical state induces a strong wipe-out of the NMR intensity, regardless of dilution; 3) The low-T upturn observed in the macroscopic susceptibility is associated to paramagnetic defects which stem from the dilution of the kagome bi-layer. The low-T analysis of the NMR lineshape suggests that the defect can be associated with a staggered spin-response to the vacancies on the kagome bi-layer. This, altogether with the maximum in the kagome bi-layer susceptibility, is very similar to what is observed in most low-dimensional antiferromagnetic correlated systems; 4) The spin glass-like freezing observed at T_g=2-4 K is not driven by the dilution-induced defects.Comment: 19 pages, 19 figures, revised version resubmitted to PRB Minor modifications: Fig.11 and discussion in Sec.V on the NMR shif

Impact of Chlamydia trachomatis in the reproductive setting: British Fertility Society Guidelines for practice

Chlamydia trachomatis infection of the genital tract is the most common sexually transmitted infection and has a world-wide distribution. The consequences of infection have an adverse effect on the reproductive health of women and are a common cause of infertility. Recent evidence also suggests an adverse effect on male reproduction. There is a need to standardise the approach in managing the impact of C. trachomatis infection on reproductive health. We have surveyed current UK practice towards screening and management of Chlamydia infections in the fertility setting. We found that at least 90% of clinicians surveyed offered screening. The literature on this topic was examined and revealed a paucity of solid evidence for estimating the risks of long-term reproductive sequelae following lower genital tract infection with C. trachomatis. The mechanism for the damage that occurs after Chlamydial infections is uncertain. However, instrumentation of the uterus in women with C. trachomatis infection is associated with a high risk of pelvic inflammatory disease, which can be prevented by appropriate antibiotic treatment and may prevent infected women from being at increased risk of the adverse sequelae, such as ectopic pregnancy and tubal factor infertility. Recommendations for practice have been proposed and the need for further studies is identified

Whole-genome sequencing reveals host factors underlying critical COVID-19

Critical COVID-19 is caused by immune-mediated inflammatory lung injury. Host genetic variation influences the development of illness requiring critical care1 or hospitalization2,3,4 after infection with SARS-CoV-2. The GenOMICC (Genetics of Mortality in Critical Care) study enables the comparison of genomes from individuals who are critically ill with those of population controls to find underlying disease mechanisms. Here we use whole-genome sequencing in 7,491 critically ill individuals compared with 48,400 controls to discover and replicate 23 independent variants that significantly predispose to critical COVID-19. We identify 16 new independent associations, including variants within genes that are involved in interferon signalling (IL10RB and PLSCR1), leucocyte differentiation (BCL11A) and blood-type antigen secretor status (FUT2). Using transcriptome-wide association and colocalization to infer the effect of gene expression on disease severity, we find evidence that implicates multiple genes—including reduced expression of a membrane flippase (ATP11A), and increased expression of a mucin (MUC1)—in critical disease. Mendelian randomization provides evidence in support of causal roles for myeloid cell adhesion molecules (SELE, ICAM5 and CD209) and the coagulation factor F8, all of which are potentially druggable targets. Our results are broadly consistent with a multi-component model of COVID-19 pathophysiology, in which at least two distinct mechanisms can predispose to life-threatening disease: failure to control viral replication; or an enhanced tendency towards pulmonary inflammation and intravascular coagulation. We show that comparison between cases of critical illness and population controls is highly efficient for the detection of therapeutically relevant mechanisms of disease

Developments in soluble lead flow batteries and remaining challenges: An illustrated review

The soluble-lead flow battery (SLFB) utilises methanesulfonic acid, an electrolyte in which Pb(II) ions are highly soluble. During charge, solid lead and lead dioxide layers are electrodeposited at the negative and positive electrodes respectively. During discharge, the deposits are electrochemically dissolved back into the recirculating electrolyte. The cell is normally undivided, which greatly reduces design complexity and cost, whilst also reducing the flow pumping requirements. Typical SLFB electrolytes offer up to 40 W h kg-1 of storage, with performance on the 100 cm2 electrode scale reaching 90% charge and 80% voltage efficiencies across 100 cycles; however the SLFB has also been tested on the 1000 cm2 electrode, four-cell stack scale. This review considers the SLFB, highlighting important developments and discussing remaining problems. In particular, methods to achieve effective stripping of lead dioxide at the positive electrode and to prevent lead dendrites at the negative electrode in order to prevent contact between the deposits, and thus shorting, are explored. A detailed understanding of the effect of Pb(II) and methanesulfonic acid concentration on the physical electrolyte properties is presented, and possible improvements to the electrodes and electrolyte composition in terms of additives are discussed in order to improve cell efficiency and longevity. Also, the importance of cell design in preventing the failure mechanisms and therefore achieving a high performance is highlighted. Studies on mathematical modelling and cycling simulation are also reviewed. Continuing research needs are listed and a forward look to future developments is taken