18,561 research outputs found

    Bored pile design in stiff clay II:Mechanisms and uncertainty

    Get PDF
    The soil mechanics related to pile design in clay has been the subject of substantial engineering research. In a companion paper, various codes of practice were reviewed showing the effect on pile capacity of the different global factors of safety that emerge from the various partial factor combinations for the ultimate limit state. Factors of safety are generally specified based on the opinions of experts. In this paper an assessment will be made of various objective procedures that can be used to reduce uncertainty in the design process, especially regarding the adoption of a pile resistance model and the selection of a soil strength profile as part of a ultimate limit state check, and the estimation of pile head settlement in the context of a serviceability limit state check. It is shown that both total stress and effective stress calculation methods are applicable in London Clay. Estimates of settlement using a non-linear soil stress–strain relationship are made and compared with published data. It is shown that the compression of the concrete dominates the settlement of long piles. Given the low settlements observed, recommendations are made for a reduction in standard factors of safety for bored pile design in stiff clays. </jats:p

    On gravity from SST, geoid from Seasat, and plate age and fracture zones in the Pacific

    Get PDF
    A composite map produced by combining 90 passes of SST data show good agreement with conventional GEM models. The SEASAT altimeter data were deduced and found to agree with both the SST and GEM fields. The maps are dominated (especially in the east) by a pattern of roughly east-west anomalies with a transverse wavelength of about 2000 km. Comparison with regional bathymetric data shows a remarkedly close correlation with plate age. Most anomalies in the east half of the Pacific could be partly caused by regional differences in plate age. The amplitude of these geoid or gravity anomalies caused by age differences should decrease with absolute plate age, and large anomalies (approximately 3 m) over old, smooth sea floor may indicate a further deeper source within or perhaps below the lithosphere. The possible plume size and ascent velocity necessary to supply deep mantle material to the upper mantle without complete thermal equilibration was considered. A plume emanating from a buoyant layer 100 km thick and 10,000 times less viscous than the surrounding mantle should have a diameter of about 400 km and must ascend at about 10 cm/yr to arrive still anomalously hot in the uppermost mantle

    Health Risks, Past Usage, and Intention to Use Weight Loss Products in Normal Weight Women with High and Low Body Dysphoria

    Get PDF
    Objective: There are many health risks involved with the use of weight loss products by normal weight women. The mass media may compound this problem through the promotion of weight loss products and a thin body size. This study tested women\u27s perceptions of different weight loss product ads to determine if body dysphoria (i.e., an over concern with body size and shape in normal weight people) was associated with risk beliefs, past behaviors, and intention toward using weight loss products. Method: Normal weight women (age range = 18-41 yr), who were classified as either high (n=45) or low (n=43) on a measure of body dysphoria, rated different weight loss products according to their perception of health risks, past behavior, and their intention to consume the products. These products were a dietary fat substitute (olestra), a prescription obesity medication (sibutramine), and an over-the-counter appetite suppressant (phenylpropanolamine). Results: High body dysphoric women reported higher intentions to use the products as well as increased prior use of two of the three weight loss products. High body dysphoric women did not believe that these weight loss products were harmless. They recognized potential health risks associated with using such products, but nonetheless, expressed intention to use these weight loss products at a higher frequency. Also, several variables related to body image were found to effectively discriminate normal weight women at risk for abusing weight loss products. Discussion: This study found that women who do not need to lose weight but have significant body image concerns were willing to use potentially harmful weight loss products despite the knowledge that such products might pose significant health risks. Techniques utilized by advertising regulatory agencies such as warning labels did not have a strong deterrent effect for stated intentions to use the products. Implications of these findings for public health policy issues were discussed

    Electron Emission from Diamondoids: A Diffusion Quantum Monte Carlo Study

    Get PDF
    We present density-functional theory (DFT) and quantum Monte Carlo (QMC) calculations designed to resolve experimental and theoretical controversies over the optical properties of H-terminated C nanoparticles (diamondoids). The QMC results follow the trends of well-converged plane-wave DFT calculations for the size dependence of the optical gap, but they predict gaps that are 1-2 eV higher. They confirm that quantum confinement effects disappear in diamondoids larger than 1 nm, which have gaps below that of bulk diamond. Our QMC calculations predict a small exciton binding energy and a negative electron affinity (NEA) for diamondoids up to 1 nm, resulting from the delocalized nature of the lowest unoccupied molecular orbital. The NEA suggests a range of possible applications of diamondoids as low-voltage electron emitters

    Student experiences of virtual reality - a case study in learning special relativity

    Full text link
    We present a study of student learning through the use of virtual reality. A software package is used to introduce concepts of special relativity to students in a game-like environment where users experience the effects of travelling at near light speeds. From this new perspective, space and time are significantly different to that experienced in everyday life. The study explores how students have worked with this environment and how these students have used this experience in their study of special relativity. A mixed method approach has been taken to evaluate the outcomes of separate implementations of the package at two universities. Students found the simulation to be a positive learning experience and described the subject area as being less abstract after its use. Also, students were more capable of correctly answering concept questions relating to special relativity, and a small but measurable improvement was observed in the final exam

    Effect of wetting layers on the strain and electronic structure of InAs self-assembled quantum dots

    Get PDF
    The effect of wetting layers on the strain and electronic structure of InAs self-assembled quantum dots grown on GaAs is investigated with an atomistic valence-force-field model and an empirical tight-binding model. By comparing a dot with and without a wetting layer, we find that the inclusion of the wetting layer weakens the strain inside the dot by only 1% relative change, while it reduces the energy gap between a confined electron and hole level by as much as 10%. The small change in the strain distribution indicates that strain relaxes only little through the thin wetting layer. The large reduction of the energy gap is attributed to the increase of the confining-potential width rather than the change of the potential height. First-order perturbation calculations or, alternatively, the addition of an InAs disk below the quantum dot confirm this conclusion. The effect of the wetting layer on the wave function is qualitatively different for the weakly confined electron state and the strongly confined hole state. The electron wave function shifts from the buffer to the wetting layer, while the hole shifts from the dot to the wetting layer.Comment: 14 pages, 3 figures, and 3 table

    Engineering model 8-cm thruster subsystem

    Get PDF
    An Engineering Model (EM) 8 cm Ion Thruster Propulsion Subsystem was developed for operation at a thrust level 5 mN (1.1 mlb) at a specific impulse 1 sub sp = 2667 sec with a total system input power P sub in = 165 W. The system dry mass is 15 kg with a mercury-propellant-reservoir capacity of 8.75 kg permitting uninterrupted operation for about 12,500 hr. The subsystem can be started from a dormant condition in a time less than or equal to 15 min. The thruster has a design lifetime of 20,000 hr with 10,000 startup cycles. A gimbal unit is included to provide a thrust vector deflection capability of + or - 10 degrees in any direction from the zero position. The EM subsystem development program included thruster optimization, power-supply circuit optimization and flight packaging, subsystem integration, and subsystem acceptance testing including a cyclic test of the total propulsion package

    Empathy Gaps Between Helpers and Help-Seekers: Implications for Cooperation

    Get PDF
    Help-seekers and potential helpers often experience an “empathy gap” – an inability to understand each other’s unique perspectives. Both parties are concerned about their reputation, self-esteem, and relationships, but these concerns differ in ways that lead to misinterpretation of the other party’s actions, and, in turn, missed opportunities for cooperation. In this article, we review research that describes the role-specific concerns of helpers and help-seekers. We then review studies of emotional perspective-taking, which can help explain why help-seekers and helpers often experience empathy gaps. We go on to discuss recent work that illustrates the consequences of empathy gaps between helpers and help-seekers—social prediction errors that prevent helping and misguided intentions that can lead to unhelpful help. Finally, we discuss some promising directions for future research

    Anomalous scattering of highly dispersed pulsars

    Get PDF
    We report multifrequency measurements of scatter broadening times for nine highly dispersed pulsars over a wide frequency range (0.6 -- 4.9 GHz). We find the scatter broadening times to be larger than expected and to scale with frequency with an average power-law index of 3.44±0.133.44\pm 0.13, i.e. significantly less than that expected from standard theories. Such possible discrepancies have been predicted very recently by Cordes & Lazio.Comment: 7 pages, 4 figures, accepted for publication in ApJ Letter
    • …
    corecore