4,650 research outputs found
Advanced technologies for perimeter intrusion detection sensors
The development of integrated circuit fabrication techniques and the resulting devices have contributed more to the advancement of exterior intrusion detectors and alarm assessment devices than any other technology. The availability of this technology has led to the improvements in and further development of smaller more powerful computers, microprocessors, solid state memories, solid state cameras, thermal imagers, low-power lasers, and shorter pulse width and higher frequency electronic circuitry. This paper presents information on planning a perimeter intrusion detection system, identifies the site characteristics that affect its performance, and describes improvements to perimeter intrusion detection sensors and assessment devices that have been achieved by using integrated circuit technology
A khintchine decomposition for free probability
Let μ be a probability measure on the real line. In this paper we prove that there exists a decomposition such that is infinitely divisible, and is indecomposable for . Additionally, we prove that the family of all -divisors of a measure is compact up to translation. Analogous results are also proven in the case of multiplicative convolutio
Our Shared Space and Threat Without Exit
Globalization is fraught with dangers due to institutional relationships that threaten humanity. These institutions, acting in unaware-concert, provide a looming danger for everyone in 21st century life. Humanity has created the threatening context; humanity bears the responsibility for its remedy. This is known as “world risk society” (Beck, 2009). The threat is all encompassing, grounded in material limits; no human is exempt from the danger. People can use these two features as fuel to politically engage and create meaningful change. It is this political context that requires generating everybody’s political will all the way from the heads of state to the average citizen.This fictitious slam poetry piece seeks to generate political will within the reader. The “Reflections from 2013” are meant to emphasize the role of “manufactured uncertainties” (2009)—the human-made risky elements of globalization-- which create a pressure within the reader as they travel from the present into the four possible futures. The order of the futures is intentionally designed to increasingly generate a sense of political will as the reader progresses from the most structurally unsustainable future (Future I) to the most sustainable future (Future IV). The movement of the piece is a transition from the possibility of destruction to the possibility of adapting to a life affirming way of organization in the end.Stories do not reveal how the future will go, only how it could go.Stories do not unpack ideas in linear form. Rather, they allow for the reader to encounter embodied ideas.Faculty Sponsor: Sherrie Steine
Decentring and distraction reduce overgeneral autobiographical memory in depression
© Cambridge University Press 2000. Reprinted with permission.Background. Increased recall of categorical autobiographical memories is a phenomenon unique to depression and post-traumatic stress disorder, and is associated with a poor prognosis for depression. Although the elevated recall of categorical memories does not change on remission from depression, recent findings suggest that overgeneral memory may be reduced by cognitive interventions and maintained by rumination. This study tested whether cognitive manipulations could influence the recall of categorical memories in dysphoric participants.
Methods. Forty-eight dysphoric and depressed participants were randomly allocated to rumination or distraction conditions. Before and after the manipulation, participants completed the Autobiographical Memory Test, a standard measure of overgeneral memory. Participants were then randomized to either a ‘decentring’ question (Socratic questions designed to facilitate viewing moods within a wider perspective) or a control question condition, before completing the Autobiographical Memory Test again.
Results. Distraction produced significantly greater decreases in the proportion of memories retrieved that were categorical than rumination. Decentring questions produced significantly greater decreases in the proportion of memories retrieved that were categorical than control questions, with this effect independent of the prior manipulation.
Conclusions. Elevated categorical memory in depression is more modifiable than has been previously assumed; it may reflect the dynamic maintenance of a cognitive style that can be interrupted by brief cognitive interventions
Deployment and recovery of offshore moorings for the MAST3 INDIA Project (INlet Dynamics Initiative - Algarve)
Recommended from our members
Physical protection system design and evaluation
The design of an effective physical protection system includes the determination of physical protection system objectives, initial design of a physical protection system, design evaluation, and probably a redesign or refinement. To develop the objectives, the designer must begin by gathering information about facility operation and conditions, such as a comprehensive description of the facility, operating conditions, and the physical protection requirements. The designer then needs to define the threat. This involves considering factors about potential adversaries: class of adversary, adversary`s capabilities, and range of adversary`s tactics. Next, the designer should identify targets. Determination of whether or not the materials being protected are attractive targets is based mainly on the ease or difficulty of acquisition and desirability of the material. The designer now knows the objectives of the physical protection system, that is, {open_quotes}what to protect against whom.{close_quotes} The next step is to design the system by determining how best to combine such elements as fences, vaults, sensors and assessment devices, entry control elements, procedures, communication devices, and protective forces personnel to meet the objectives of the system. Once a physical protection system is designed, it must be analyzed and evaluated to ensure it meets the physical protection objectives. Evaluation must allow for features working together to ensure protection rather than regarding each feature separately. Due to the complexity of the protection systems, an evaluation usually requires modeling techniques. If any vulnerabilities are found, the initial system must be redesigned to correct the vulnerabilities and a reevaluation conducted. This paper reviews the physical protection system design and methodology mentioned above. Examples of the steps required and a brief introduction to some of the technologies used in modem physical protections system are given
Recommended from our members
Physical protection system design and evaluation
The design of an effective physical protection system (PPS) includes the determination of the PPS objectives, the initial design of a PPS, the evaluation of the design, and probably, the redesign or refinement of the system. To develop the objectives, the designer must begin by gathering information about facility operation and conditions, such as a comprehensive description of the facility, operating conditions, and the physical protection requirements. The designer then needs to define the threat. This involves considering factors about potential adversaries: class of adversary, adversary`s capabilities, and range of adversary`s tactics. Next, the designer should identify targets. Determination of whether or not the materials being protected are attractive targets is based mainly on the ease or difficulty of acquisition and desirability of the material. The designer now knows the objectives of the PPS, that is, ``what to protect against whom.`` The next step is to design the system by determining how best to combine such elements as fences, vaults, sensors and assessment devices, entry control devices, communication devices, procedures, and protective force personnel to meet the objectives of the system. Once a PPS is designed, it must be analyzed and evaluated to ensure it meets the PPS objectives. Evaluation must allow for features working together to ensure protection rather than regarding each feature separately. Due to the complexity of the protection systems, an evaluation usually requires modeling techniques. If any vulnerabilities are found, the initial system must be redesigned to correct the vulnerabilities and a reevaluation conducted. After the system is installed, the threat and system parameters may change with time. If they do, the analysis must be performed periodically to ensure the system objectives are still being met
Two-color resonant four-wave mixing: a tool for double resonance spectroscopy
Two-color resonant four-wave mixing (RFWM) shows great promise in a variety of double-resonance applications in molecular spectroscopy and chemical dynamics. One such application is stimulated emission pumping (SEP), which is a powerful method of characterizing ground-state potential energy surfaces in regions of chemical interest. The authors use time-independent, diagrammatic perturbation theory to identify the resonant terms in the third-order nonlinear susceptibility for each possible scheme by which two-color RFWM can be used for double-resonance spectroscopy. After a spherical tensor analysis they arrive at a signal expression for two-color RFWM that separates the molecular properties from purely laboratory-frame factors. In addition, the spectral response for tuning the DUMP laser in RFWM-SEP is found to be a simple Lorentzian in free-jet experiments. The authors demonstrate the utility of RFWM-SEP and test their theoretical predictions in experiments on jet-cooled transient molecules. In experiments on C{sub 3} they compare the two possible RFWM-SEP processes and show that one is particularly well-suited to the common situation in which the PUMP transition is strong but the DUMP transitions are weak. They obtain RFWM-SEP spectra of the formyl radical, HCO, that probe quasibound vibrational resonances lying above the low threshold for dissociation to H+CO. Varying the polarization of the input beams or PUMP rotational branch produces dramatic effects, in the relative intensities of rotational lines in the RFWM-SEP spectra of HCO; these effects are well-described by their theoretical analysis. Finally, RFWM-SEP spectra of HCO resonances that are homogeneously broadened by dissociation confirm the predicted lineshape and give widths that are in good agreement with those determined via unsaturated fluorescence depletion SEP
- …