1,568 research outputs found

    Lunar and Martian hardware commonality

    Get PDF
    A number of different hardware elements were examined for possible Moon/Mars program commonality. These include manned landers; cargo landers, a trans-Mars injection (TMI) stage, traverse vehicles, unmanned surface rovers, habitation modules, and power supplies. Preliminary analysis indicates that it is possible to build a common two-stage manned lander. A single-stage, reusable lander may be practical for the lunar cast, but much less so for the Martian case, and commonality may therefore exist only at the subsystem level. A modified orbit transfer vehicle was examined as a potential cargo lander. Potential cargoes to various destinations were calculated for a Shuttle external tank sized TMI stage. A nuclear powered, long range traverse vehicle was conceptually designed and commonality is considered feasible. Short range, unmanned rovers can be made common without great effort. A surface habitation module may be difficult to make common due to difficulties in landing certain shapes on the Martian surface with aerobraking landers. Common nuclear power sources appear feasible. High temperature radiators appear easy to make common. Low temperature radiators may be difficult to make common. In most of these cases, Martian requirements determine the design

    Global water cycle

    Get PDF
    This research is the MSFC component of a joint MSFC/Pennsylvania State University Eos Interdisciplinary Investigation on the global water cycle extension across the earth sciences. The primary long-term objective of this investigation is to determine the scope and interactions of the global water cycle with all components of the Earth system and to understand how it stimulates and regulates change on both global and regional scales. Significant accomplishments in the past year are presented and include the following: (1) water vapor variability; (2) multi-phase water analysis; (3) global modeling; and (4) optimal precipitation and stream flow analysis and hydrologic processes

    PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 4: Maintenance document (version 3.0)

    Get PDF
    The Maintenance Document Version 3.0 is a guide to the PAN AIR software system, a system which computes the subsonic or supersonic linear potential flow about a body of nearly arbitrary shape, using a higher order panel method. The document describes the overall system and each program module of the system. Sufficient detail is given for program maintenance, updating, and modification. It is assumed that the reader is familiar with programming and CRAY computer systems. The PAN AIR system was written in FORTRAN 4 language except for a few CAL language subroutines which exist in the PAN AIR library. Structured programming techniques were used to provide code documentation and maintainability. The operating systems accommodated are COS 1.11, COS 1.12, COS 1.13, and COS 1.14 on the CRAY 1S, 1M, and X-MP computing systems. The system is comprised of a data base management system, a program library, an execution control module, and nine separate FORTRAN technical modules. Each module calculates part of the posed PAN AIR problem. The data base manager is used to communicate between modules and within modules. The technical modules must be run in a prescribed fashion for each PAN AIR problem. In order to ease the problem of supplying the many JCL cards required to execute the modules, a set of CRAY procedures (PAPROCS) was created to automatically supply most of the JCL cards. Most of this document has not changed for Version 3.0. It now, however, strictly applies only to PAN AIR version 3.0. The major changes are: (1) additional sections covering the new FDP module (which calculates streamlines and offbody points); (2) a complete rewrite of the section on the MAG module; and (3) strict applicability to CRAY computing systems

    Increased tolerance of Anopheles gambiae s.s. to chemical insecticides after exposure to agrochemical mixture

    Get PDF
    Resistance of mosquitoes to insecticides is mainly attributed to their adaptation to insecticide-based vector control interventions. Although pesticides used in agriculture have been frequently mentioned as an additional force driving the selection of resistance, only a few studies were dedicated to validate this hypothesis. The objective of this study was to investigate the effect of exposure of the malaria mosquito, Anopheles gambiae s.s. larvae for 72h to sub-lethal concentrations of the agrochemical mixture (pesticides, herbicides and fungicides). Their subsequent tolerances were measured to deltamethrin (pyrethroid), DDT (organochlorine) and bendiocarb (carbamate) currently used for vector control. The mean LC50 was determined and tolerance ratios for larvae exposed to agrochemical comparatively with unexposed larvae were calculated and expressed as fold increased tolerance. Bioassays revealed a significant increase in larval tolerance to detamethrin (1.83-2.86 fold), DDT (1.31-1.53 fold) and bendiocarb (1.14-1.19 fold) following exposure to 0.1 µM and 1µM agrochemical mixture. The observed increased tolerance in this study is likely to be based on metabolic resistance mechanisms. Overall, this study reveals the potential of agrochemicals to increase the tolerance of mosquito larvae to chemical insecticides

    Unlocking biomarker discovery: Large scale application of aptamer proteomic technology for early detection of lung cancer

    Get PDF
    Lung cancer is the leading cause of cancer deaths, because ~84% of cases are diagnosed at an advanced stage. Worldwide in 2008, ~1.5 million people were diagnosed and ~1.3 million died – a survival rate unchanged since 1960. However, patients diagnosed at an early stage and have surgery experience an 86% overall 5-year survival. New diagnostics are therefore needed to identify lung cancer at this stage. Here we present the first large scale clinical use of aptamers to discover blood protein biomarkers in disease with our breakthrough proteomic technology. This multi-center case-control study was conducted in archived samples from 1,326 subjects from four independent studies of non-small cell lung cancer (NSCLC) in long-term tobacco-exposed populations. We measured >800 proteins in 15uL of serum, identified 44 candidate biomarkers, and developed a 12-protein panel that distinguished NSCLC from controls with 91% sensitivity and 84% specificity in a training set and 89% sensitivity and 83% specificity in a blinded, independent verification set. Performance was similar for early and late stage NSCLC. This is a significant advance in proteomics in an area of high clinical need

    Association between community-level social risk and spending among Medicare beneficiaries: Implications for social risk adjustment and health equity

    Get PDF
    IMPORTANCE: Payers are increasingly using approaches to risk adjustment that incorporate community-level measures of social risk with the goal of better aligning value-based payment models with improvements in health equity. OBJECTIVE: To examine the association between community-level social risk and health care spending and explore how incorporating community-level social risk influences risk adjustment for Medicare beneficiaries. DESIGN, SETTING, AND PARTICIPANTS: Using data from a Medicare Advantage plan linked with survey data on self-reported social needs, this cross-sectional study estimated health care spending health care spending was estimated as a function of demographics and clinical characteristics, with and without the inclusion of Area Deprivation Index (ADI), a measure of community-level social risk. The study period was January to December 2019. All analyses were conducted from December 2021 to August 2022. EXPOSURES: Census block group-level ADI. MAIN OUTCOMES AND MEASURES: Regression models estimated total health care spending in 2019 and approximated different approaches to social risk adjustment. Model performance was assessed with overall model calibration (adjusted R2) and predictive accuracy (ratio of predicted to actual spending) for subgroups of potentially vulnerable beneficiaries. RESULTS: Among a final study population of 61 469 beneficiaries (mean [SD] age, 70.7 [8.9] years; 35 801 [58.2%] female; 48 514 [78.9%] White; 6680 [10.9%] with Medicare-Medicaid dual eligibility; median [IQR] ADI, 61 [42-79]), ADI was weakly correlated with self-reported social needs (r = 0.16) and explained only 0.02% of the observed variation in spending. Conditional on demographic and clinical characteristics, every percentile increase in the ADI (ie, more disadvantage) was associated with a $11.08 decrease in annual spending. Directly incorporating ADI into a risk-adjustment model that used demographics and clinical characteristics did not meaningfully improve model calibration (adjusted R2 = 7.90% vs 7.93%) and did not significantly reduce payment inequities for rural beneficiaries and those with a high burden of self-reported social needs. A postestimation adjustment of predicted spending for dual-eligible beneficiaries residing in high ADI areas also did not significantly reduce payment inequities for rural beneficiaries or beneficiaries with self-reported social needs. CONCLUSIONS AND RELEVANCE: In this cross-sectional study of Medicare beneficiaries, the ADI explained little variation in health care spending, was negatively correlated with spending conditional on demographic and clinical characteristics, and was poorly correlated with self-reported social risk factors. This prompts caution and nuance when using community-level measures of social risk such as the ADI for social risk adjustment within Medicare value-based payment programs
    • …
    corecore