169 research outputs found

    Limited development as a tool for agricultural preservation in Massachusetts

    Get PDF
    Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Architecture; and, (M.C.P.)--Massachusetts Institute of Technology, Dept. of Urban Studies and Planning, 1988.Includes bibliographical references (leaves 192-197).Limited development offers the hope of turning market development pressure which threatens open land into a means for financing its protection. In theory, the profit from developing a small portion of a parcel can be used to subsidize the protection of the remainder. This thesis critically examines the financial, institutional, and agricultural effectiveness of limited development as a tool for protecting farmland. An alternative accounting methodology is proposed which expresses cash flows as sources and uses of subsidies for the support of non-market land uses, allowing comparison of limited development and traditional tools for financing land conservation. The model also attempts to determine the extent to which limited development profits are due to enhancement of development land value by the restriction of adjacent open space, market appreciation in real estate prices, and deal-making and subdivision of land. The model assumes the perspective of a non-profit limited developer. The model is then applied to three Massachusetts case studies of farmland preservation through limited development. The agricultural viability of the protected farmland is briefly examined in each case study. The thesis concludes that limited development often provides only a minor supplement to public subsidy programs and private contributions in the protection of farmland, although it can supply significant subsidies in some cases. Furthermore, limited development can put a non-profit into the awkward and risky role of a for-profit developer. Agriculturally, limited development leaves small farm parcels adjacent to residential use. While not ideal, such a pattern is typical of metropolitan areas, and one to which some farmers have successfully adapted.by William D. Tuttle, III.M.C.P.M.S

    Assignment of the vibrations of the S0, S1, and D+0 states of perhydrogenated and perdeuterated isotopologues of chlorobenzene

    Get PDF
    We report vibrationally resolved spectra of the S1 ← S0 transition of chlorobenzene using resonance-enhanced multiphoton ionization spectroscopy. We study chlorobenzene-h5 as well as its perdeuterated isotopologue, chlorobenzene-d5. Changes in the form of the vibrational modes between the isotopologues and also between the S0 and S1 electronic states are discussed for each species. Vibrational bands are assigned utilizing quantum chemical calculations, previous experimental results, and isotopic shifts, including those between the 35Cl and 37Cl isotopologues. Previous work and assignments of the S1 spectra are discussed. Additionally, the vibrations in the ground state cation, D+0, are considered, since these have also been used by previous workers in assigning the excited neutral state spectra

    Theoretical study of Si+(2PJ)-RG complexes and transport of Si+(2PJ) in RG (RG = He – Ar)

    Get PDF
    We calculate accurate interatomic potentials for the interaction of a singly-charged silicon cation with a rare gas atom of helium, neon or argon. We employ the RCCSD(T) method, and basis sets of quadruple- and quintuple- quality; each point is counterpoise corrected and extrapolated to the basis set limit. We consider the lowest electronic state of the silicon atomic cation, Si+(2P), and calculate the interatomic potentials for the terms that arise from this: 2and 2+. We additionally calculate the interatomic potentials for the respective spin-orbit levels, and examine the effect on the spectroscopic parameters; we also derive effective ionic radii for C+ and Si+. Finally, we employ each set of potentials to calculate transport coefficients, and compare these to available data for Si+ in He

    Unravelling overlaps and torsion-facilitated coupling using two-dimensional laser-induced fluorescence

    Get PDF
    Two-dimensional laser-induced fluorescence (2D-LIF) spectroscopy is employed to identify contributions to fluorescence excitation spectra that arise from both overlapping bands and coupling between zero-order states (ZOSs). Evidence is found for the role of torsional motion in facilitating the coupling between vibrations that particularly involves the lowest-wavenumber out-of-plane vibrational modes. The experiments are carried out on jet-cooled p-fluorotoluene, where the molecules are initially in the lowest two torsional levels. Here we concentrate on the 390–420 cm−1 features in the S1 ← S0 excitation spectrum, assigning the features seen in the 2D-LIF spectrum, aided by separate dispersed fluorescence spectra. The 2D-LIF spectra allow the overlapping contributions to be cleanly separated, including some that arise from vibrational-torsional coupling. Various coupling routes open up because of the different symmetries of the lowest two torsional modes; these combine with the vibrational symmetry to provide new symmetry-allowed vibration-torsion (‘vibtor’) interactions, and the role of the excited m = 1 torsional level is found to be significant

    Resonance-enhanced multiphoton ionization (REMPI) spectroscopy of p-chlorofluorobenzene

    Get PDF
    The S1 ← S0 (A ~ 1B2 ← X~ 1A1) electronic transition of para-chlorofluorobenzene has been investigated using resonance-enhanced multiphoton ionization (REMPI) spectroscopy. Assignment of the vibrational structure has been achieved by comparison with corresponding spectra of related molecules, via quantum chemical calculations, and via shifts in bands between the spectra of the 35Cl and 37Cl isotopologues. In addition, we have also partially reassigned a previously-published spectrum of para-dichlorobenzene

    Interaction potentials, spectroscopy and transport properties of C+(2PJ) and C+(4PJ) with helium

    Get PDF
    We calculate accurate interatomic potentials for the interaction of a singly-charged carbon cation with a helium atom. We employ the RCCSD(T) method, and basis sets of quadruple-zeta and quintuple-zeta quality; each point is counterpoise corrected and extrapolated to the basis set limit. We consider the two lowest C+(2P) and C+(4P) electronic states of the carbon cation, and calculate the interatomic potentials for the terms that arise from these: 2-PI and 2-SIG+, and 4-PI and 4-SIG- , respectively. We additionally calculate the interatomic potentials for the respective spin-orbit levels, and examine the effect on the spectroscopic parameters. Finally, we employ each set of potentials to calculate transport coefficients, and compare these to available data. Critical comments are made in the cases where there are discrepancies between the calculated values and measured data

    Vibrational and vibrational-torsional interactions in the 0–600 cm-1 region of the S1 ← S0 spectrum of p-xylene investigated with resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy

    Get PDF
    We assign the 0–600 cm-1 region of the S1 ← S0 transition in p-xylene using resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy. In the 0–300 cm-1 range, as well as the intense origin band there are a number of torsional and vibration-torsion (vibtor) features. The latter are discussed in more detail in an accompanying paper [Gardner et al. J. Chem. Phys. XXX, xxxxxx (2016)]. Here we focus on the origin and the 300–650 cm-1 region, where vibrational bands and some vibtor activity is observed. From the origin ZEKE spectrum we derive the ionization energy of p-xylene as 68200 ± 5 cm-1. The assignment of the REMPI spectrum is based on the activity observed in the ZEKE spectra coupled with knowledge of the vibrational wavenumbers obtained from quantum chemical calculations. We assign several isolated vibrations, and a complex Fermi resonance that is found to comprise contributions from both vibrations and vibtor levels, and we examine this via a two-dimensional ZEKE (2D-ZEKE) spectrum. A number of the vibrational features in the REMPI and ZEKE spectra of p-xylene that have been reported previously are reassigned and now largely consist of totally-symmetric contributions. We briefly discuss the appearance of non-Franck-Condon allowed transitions. Finally, we find remarkably similar spectral activity to that in the related disubstituted benzenes, para-difluorobenzene and para-fluorotoluene

    Vibrations of the S1 state of fluorobenzene-h5 and fluorobenzene-d5 via resonance-enhanced multiphoton ionization (REMPI) spectroscopy

    Get PDF
    We report resonance-enhanced multiphoton ionization spectra of the isotopologues fluorobenzeneh5 and fluorobenzene-d5. By making use of quantum chemical calculations, the changes in the wavenumber of the vibrational modes upon deuteration are examined. Additionally, the mixing of vibrational modes both between isotopologues and also between the two electronic states is discussed. The isotopic shifts lead to dramatic changes in the appearance of the spectrum as vibrations shift in and out of Fermi resonance. Assignments of the majority of the fluorobenzene-d5 observed bands are provided, aided by previous results on fluorobenzene-h5

    Molecular symmetry group analysis of the low-wavenumber torsions and vibration-torsions in the S1 state and ground state cation of p-xylene: an investigation using resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy

    Get PDF
    For the first time, a molecular symmetry group (MSG) analysis has been undertaken in the investigation of the electronic spectroscopy of p-xylene (p-dimethylbenzene). Torsional and vibration-torsional (vibtor) levels in the S1 state and ground state of the cation of p-xylene (p-dimethylbenzene) are investigated using resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy. In the present work, we concentrate on the 0–350 cm 1 region, where there are a number of torsional and vibtor bands and we discuss the assignment of this region. In an accompanying paper [Tuttle et al. J. Chem. Phys. XXX, xxxxxx (2016)], we examine the 350–600 cm 1 region where vibtor levels are observed as part of a Fermi resonance. The similarity of much of the observed spectral activity to that in the related substituted benzenes, toluene and para-fluorotoluene, is striking, despite the different symmetries. The discussion necessitates a consideration of the MSG of p-xylene, which has been designated G72, but we shall also designate [3,3]D2h and we include the symmetry operations, character table and direct product table for this. We also discuss the symmetries of the internal rotor (torsional) levels and the selection rules for the particular electronic transition of p-xylene investigated here

    Direct observation of vibrational energy dispersal via methyl torsions

    Get PDF
    Explicit evidence for the role of methyl rotor levels in promoting energy dispersal is reported. A set of coupled zero-order vibration/vibration-torsion (vibtor) levels in the S1 state of para-fluorotoluene (pFT) are investigated. Two-dimensional laser-induced fluorescence (2D-LIF) and two-dimensional zero-kinetic-energy (2D-ZEKE) spectra are reported, and the assignment of the main features in both sets of spectra reveals that the methyl torsion is instrumental in providing a route for coupling between vibrational levels of different symmetry classes. We find that there is very localized, and selective, dissipation of energy via doorway states, and that, in addition to an increase in the density of states, a critical role of the methyl group is a relaxation of symmetry constraints compared to direct vibrational coupling
    corecore