5 research outputs found
Pilot-scale ceramic membrane filtration of skim milk for the production of a 'humanised' protein base ingredient for infant milk formula
The protein composition of bovine skim milk was modified using pilot scale membrane filtration to produce a whey protein-dominant ingredient with a casein profile closer to human milk. Bovine skim milk was processed at low (8.9 °C) or high (50 °C) temperature using ceramic microfiltration (MF) membranes (0.1 μm mean pore diameter). The resulting permeate stream was concentrated using polyethersulfone ultrafiltration (UF) membranes (10 kDa cut-off). The protein profile of MF and UF retentate streams were determined using reversed phase-high performance liquid chromatography and polyacrylamide gel electrophoresis. Permeate from the cold MF process (8.9 °C) had a casein:whey protein ratio of ∼35:65 with no αS- or κ-casein present, compared with a casein:whey protein ratio of ∼10:90 at 50 °C. This study has demonstrated the application of cold membrane filtration (8.9 °C) at pilot scale to produce a dairy ingredient with a protein profile closer to that of human milk
Rehydration behaviour of spray-dried micellar casein concentrates produced using microfiltration of skim milk at cold or warm temperatures
peer-reviewedMicrofiltration (MF) of skim milk, when combined with diafiltration (DF), facilitates the manufacture of liquid micellar casein concentrate (MCC), which can be spray-dried into high-protein (≥80% protein, dry-basis) powders. MCC powders rehydrate slowly, which is typically considered a defect by end-users. This study compared the impact of cold (<10 °C) or warm (50 °C) MF/DF on the rehydration characteristics of MCC powders (MCCcold and MCCwarm, respectively). The wetting properties of the MCC powders, measured using optical tensiometry, were found to be equivalent. However, pronounced differences in dispersion characteristics were measured, and, after 90 min rehydration at 50 °C, liberated casein micelles accounted for only 7.5% of total particle volume in MCCwarm compared with 48% in MCCcold. Due to its superior dispersion characteristics, MCCcold yielded 50–60% less sediment during analytical centrifugation experiments. Cold MF/DF may improve the solubility of MCC powders by accelerating the release of casein micelles from powder particles during rehydration
Stability of Whey Proteins during Thermal Processing: A Review
Whey proteins have many benefits due to their high nutritional value and their various applications in food products. A drawback of whey proteins is their instability to thermal processing, which leads to their denaturation, aggregation, and, under some conditions, gelation. As thermal processing is a major treatment in the processing of milk and milk products, its influence on whey proteins has been extensively studied. Understanding the mechanisms involved during each stage of denaturation and aggregation of whey proteins is critical to devising ways of improving their stability. These aspects are reviewed in this paper. Also covered are approaches to preventing or reducing heat-induced aggregation of whey proteins. Inhibition of aggregate formation has considerable potential for alleviating the problems that arise from the instability of whey proteins
Rehydration behaviour of spray-dried micellar casein concentrates produced using microfiltration of skim milk at cold or warm temperatures
Microfiltration (MF) of skim milk, when combined with diafiltration (DF), facilitates the manufacture of liquid micellar casein concentrate (MCC), which can be spray-dried into high-protein (≥80% protein, dry-basis) powders. MCC powders rehydrate slowly, which is typically considered a defect by end-users. This study compared the impact of cold (<10 °C) or warm (50 °C) MF/DF on the rehydration characteristics of MCC powders (MCCcold and MCCwarm, respectively). The wetting properties of the MCC powders, measured using optical tensiometry, were found to be equivalent. However, pronounced differences in dispersion characteristics were measured, and, after 90 min rehydration at 50 °C, liberated casein micelles accounted for only 7.5% of total particle volume in MCCwarm compared with 48% in MCCcold. Due to its superior dispersion characteristics, MCCcold yielded 50–60% less sediment during analytical centrifugation experiments. Cold MF/DF may improve the solubility of MCC powders by accelerating the release of casein micelles from powder particles during rehydration