1,225 research outputs found
Confinement and scaling in deep inelastic scattering
We show that parton confinement in the final state generates large
corrections to Bjorken scaling, thus leaving less room for the logarithmic
corrections. In particular, the -scaling violations at large are
entirely described in terms of power corrections. For treatment of these
non-perturbative effects, we derive a new expansion in powers of for
the structure function that is free of infra-red singularities and which
reduces corrections to the leading term. The leading term represents scattering
from an off-mass-shell parton, which keeps the same virtual mass in the final
state. It is found that this quasi-free term is a function of a new variable
, which coincides with the Bjorken variable for . The
two variables are very different, however, at finite . In particular, the
variable depends on the invariant mass of the spectator particles.
Analysis of the data at large shows excellent scaling in the variable , and determines the value of the diquark mass to be close to zero. -scaling allows us to extract the structure function near the elastic
threshold. It is found to behave as . Predictions for the
structure functions based on -scaling are made.Comment: Discussion of target mass corrections is added. Accepted for
publication in Phys. Rev.
Counting matrices over finite fields with support on skew Young diagrams and complements of Rothe diagrams
We consider the problem of finding the number of matrices over a finite field
with a certain rank and with support that avoids a subset of the entries. These
matrices are a q-analogue of permutations with restricted positions (i.e., rook
placements). For general sets of entries these numbers of matrices are not
polynomials in q (Stembridge 98); however, when the set of entries is a Young
diagram, the numbers, up to a power of q-1, are polynomials with nonnegative
coefficients (Haglund 98).
In this paper, we give a number of conditions under which these numbers are
polynomials in q, or even polynomials with nonnegative integer coefficients. We
extend Haglund's result to complements of skew Young diagrams, and we apply
this result to the case when the set of entries is the Rothe diagram of a
permutation. In particular, we give a necessary and sufficient condition on the
permutation for its Rothe diagram to be the complement of a skew Young diagram
up to rearrangement of rows and columns. We end by giving conjectures
connecting invertible matrices whose support avoids a Rothe diagram and
Poincar\'e polynomials of the strong Bruhat order.Comment: 24 pages, 9 figures, 1 tabl
Patterns of regional lung physiology in cystic fibrosis using ventilation magnetic resonance imaging and multiple-breath washout
Hyperpolarised helium-3 (3He) ventilation magnetic resonance imaging (MRI) and multiple-breath washout (MBW) are sensitive methods for detecting lung disease in cystic fibrosis (CF). We aimed to explore their relationship across a broad range of CF disease severity and patient age, as well as assess the effect of inhaled lung volume on ventilation distribution.32 children and adults with CF underwent MBW and 3He-MRI at a lung volume of end-inspiratory tidal volume (EIVT). In addition, 28 patients performed 3He-MRI at total lung capacity. 3He-MRI scans were quantitatively analysed for ventilation defect percentage (VDP), ventilation heterogeneity index (VHI) and the number and size of individual contiguous ventilation defects. From MBW, the lung clearance index, convection-dependent ventilation heterogeneity (Scond) and convection-diffusion-dependent ventilation heterogeneity (Sacin) were calculated.VDP and VHI at EIVT strongly correlated with lung clearance index (r=0.89 and r=0.88, respectively), Sacin (r=0.84 and r=0.82, respectively) and forced expiratory volume in 1 s (FEV1) (r=-0.79 and r=-0.78, respectively). Two distinct 3He-MRI patterns were highlighted: patients with abnormal FEV1 had significantly (p<0.001) larger, but fewer, contiguous defects than those with normal FEV1, who tended to have numerous small volume defects. These two MRI patterns were delineated by a VDP of ∼10%. At total lung capacity, when compared to EIVT, VDP and VHI reduced in all subjects (p<0.001), demonstrating improved ventilation distribution and regions of volume-reversible and nonreversible ventilation abnormalities
Accurate simulation estimates of phase behaviour in ternary mixtures with prescribed composition
This paper describes an isobaric semi-grand canonical ensemble Monte Carlo
scheme for the accurate study of phase behaviour in ternary fluid mixtures
under the experimentally relevant conditions of prescribed pressure,
temperature and overall composition. It is shown how to tune the relative
chemical potentials of the individual components to target some requisite
overall composition and how, in regions of phase coexistence, to extract
accurate estimates for the compositions and phase fractions of individual
coexisting phases. The method is illustrated by tracking a path through the
composition space of a model ternary Lennard-Jones mixture.Comment: 6 pages, 3 figure
Challenges of open innovation: the paradox of firm investment in open-source software
Open innovation is a powerful framework encompassing the generation, capture, and employment of intellectual property at the firm level. We identify three fundamental challenges for firms in applying the concept of open innovation: finding creative ways to exploit internal innovation, incorporating external innovation into internal development, and motivating outsiders to supply an ongoing stream of external innovations. This latter challenge involves a paradox, why would firms spend money on R&D efforts if the results of these efforts are available to rival firms? To explore these challenges, we examine the activity of firms in opensource software to support their innovation strategies. Firms involved in open-source software often make investments that will be shared with real and potential rivals. We identify four strategies firms employ – pooled R&D/product development, spinouts, selling complements and attracting donated complements – and discuss how they address the three key challenges of open innovation. We conclude with suggestions for how similar strategies may apply in other industries and offer some possible avenues for future research on open innovation
Complex low volume electronics simulation tool to improve yield and reliability
Assembly of Printed Circuit Boards (PCB) in low volumes
and a high-mix requires a level of manual intervention during
product manufacture, which leads to poor first time yield and
increased production costs. Failures at the component-level
and failures that stem from non-component causes (i.e.
system-level), such as defects in design and manufacturing,
can account for this poor yield. These factors have not been
incorporated in prediction models due to the fact that systemfailure
causes are not driven by well-characterised
deterministic processes. A simulation and analysis support
tool being developed that is based on a suite of interacting
modular components with well defined functionalities and
interfaces is presented in this paper. The CLOVES (Complex
Low Volume Electronics Simulation) tool enables the
characterisation and dynamic simulation of complete design;
manufacturing and business processes (throughout the entire
product life cycle) in terms of their propensity to create
defects that could cause product failure. Details of this system
and how it is being developed to fulfill changing business
needs is presented in this paper. Using historical data and
knowledge of previous printed circuit assemblies (PCA)
design specifications and manufacturing experiences, defect
and yield results can be effectively stored and re-applied for
future problem solving. For example, past PCA design
specifications can be used at design stage to amend designs or
define process options to optimise the product yield and
service reliability
Cystic Fibrosis Foundation and European Cystic Fibrosis Society Survey of cystic fibrosis mental health care delivery
Background: Psychological morbidity in individuals with cystic fibrosis (CF) and their caregivers is common. The Cystic Fibrosis Foundation (CFF) and European Cystic Fibrosis Society (ECFS) Guidelines Committee on Mental Health sought the views of CF health care professionals concerning mental health care delivery.
Methods: An online survey which focused on the current provision and barriers to mental health care was distributed to CF health care professionals.
Results: Of the 1454 respondents, many did not have a colleague trained in mental health issues and 20% had no one on their team whose primary role was focused on assessing or treating these issues. Insufficient resources and a lack of competency were reported in relation to mental health referrals. Seventy-three percent of respondents had no experience with mental health screening. Of those who did, they utilized 48 different, validated scales.
Conclusions: These data have informed the decision-making, dissemination and implementation strategies of the Mental Health Guidelines Committee sponsored by the CFF and ECFS
Characterization of printed solder paste excess and bridge related defects
Surface Mount Technology (SMT) involves the
printing of solder paste on to printed circuit board (PCB)
interconnection pads prior to component placement and
reflow soldering. This paper focuses on the solder paste
deposition process. With an approximated cause ratio of
50 – 70% of post assembly defects, solder paste
deposition represents the most significant cause initiator
of the three sub-processes. Paradigmatic cause models,
and associated design rules and effects data are
extrapolated from academic and industrial literature and
formulated into physical models that identify and
integrate the process into three discrete solder paste
deposition events - i.e. (i) stencil / PCB alignment, (ii)
print stroke / aperture filling and (iii) stencil separation /
paste transfer. The project’s industrial partners are
producers of safety-critical products and have recognised
the in-service reliability benefits of electro-mechanical
interface elimination when multiple smaller circuit
designs are assimilated into one larger Printed Circuit
Assembly (PCA). However, increased solder paste
deposition related defect rates have been reported with
larger PCAs and therefore, print process physical models
need to account for size related phenomena
A simulation module for supporting the manufacture of high value added electronics manufacturing
Given the global pressures and demanding
requirements for high value added electronics
manufacturing, it is vital to make the right decisions on
the shop floor. One of the main shop floor level decisions
in the domain is the selection of the most appropriate
scheduling strategy for the available manufacturing
system. Simulation has proved to be a powerful decision
support tool. However, very few studies have used this
potential to support the evaluation of scheduling
strategies in a manufacturing context. A component-based
simulation tool to evaluate the performance of scheduling
strategies on a particular system is presented in this paper.
The component based structure of the simulation tool
allows the main problem requirements to be addressed.
An example, based on a real company, illustrates the
nature of the simulation results and the kind of support
that can be obtaine
- …