712 research outputs found
Analysis of Rotary Bayonets and Piping
This report quantifies certain characteristics of the rotary bayonets and associated platform piping on the DO detector. The Vacuum Jacketed 4-inch x 6-inch and 1.5-inch x 3-inch and the 4-inch and 6-inch vacuum pipe articulating jumpers are considered here. The values of greatest importance are the forces required at the bayonet moment arms given in Table II and the stresses summarized in Table III. The forces required should be noted and checked that they are acceptable to the problem. The maximum bending stresses of the vacuum pipes do not exceed 1000 psi and are essentially negligible. The 4-inch x 6-inch vacuum jacketed line experiences the maximum bending stress of 10,300 psi. According to code B31.1, the maximum allowable bending stress is 25,500 psi. The major sources of error in these calculations should be summarized. First, all weights used were approximations and all lengths used were scaled from drawings. Second, while the FRAME MAC{trademark} models resemble the vacuum pipe articulating jumpers, they are definitely simplified. For instance, they do not account for the different stiffnesses of the unions. Finally, the bayonets in the ANSYS models consist of an outer jacket and an inner pipe fixed together at the end of the male sleeve. The actual bayonets are more complex and are composed of various sizes of tubes and pipes which affect the stiffness of the section
Discrete Routh Reduction
This paper develops the theory of abelian Routh reduction for discrete
mechanical systems and applies it to the variational integration of mechanical
systems with abelian symmetry. The reduction of variational Runge-Kutta
discretizations is considered, as well as the extent to which symmetry
reduction and discretization commute. These reduced methods allow the direct
simulation of dynamical features such as relative equilibria and relative
periodic orbits that can be obscured or difficult to identify in the unreduced
dynamics. The methods are demonstrated for the dynamics of an Earth orbiting
satellite with a non-spherical correction, as well as the double
spherical pendulum. The problem is interesting because in the unreduced
picture, geometric phases inherent in the model and those due to numerical
discretization can be hard to distinguish, but this issue does not appear in
the reduced algorithm, where one can directly observe interesting dynamical
structures in the reduced phase space (the cotangent bundle of shape space), in
which the geometric phases have been removed. The main feature of the double
spherical pendulum example is that it has a nontrivial magnetic term in its
reduced symplectic form. Our method is still efficient as it can directly
handle the essential non-canonical nature of the symplectic structure. In
contrast, a traditional symplectic method for canonical systems could require
repeated coordinate changes if one is evoking Darboux' theorem to transform the
symplectic structure into canonical form, thereby incurring additional
computational cost. Our method allows one to design reduced symplectic
integrators in a natural way, despite the noncanonical nature of the symplectic
structure.Comment: 24 pages, 7 figures, numerous minor improvements, references added,
fixed typo
Formulation and performance of variational integrators for rotating bodies
Variational integrators are obtained for two mechanical systems whose configuration spaces are, respectively, the rotation group and the unit sphere. In the first case, an integration algorithm is presented for Eulerās equations of the free rigid body, following the ideas of Marsden et al. (Nonlinearity 12:1647ā1662, 1999). In the second example, a variational time integrator is formulated for the rigid dumbbell. Both methods are formulated directly on their nonlinear configuration spaces, without using Lagrange multipliers. They are one-step, second order methods which show exact conservation of a discrete angular momentum which is identified in each case. Numerical examples illustrate their properties and compare them with existing integrators of the literature
Recommended from our members
Recurrent mutualism breakdown events in a legume rhizobia metapopulation.
Bacterial mutualists generate major fitness benefits for eukaryotes, reshaping the host phenotype and its interactions with the environment. Yet, microbial mutualist populations are predicted to generate mutants that defect from providing costly services to hosts while maintaining the capacity to exploit host resources. Here, we examined the mutualist service of symbiotic nitrogen fixation in a metapopulation of root-nodulating Bradyrhizobium spp. that associate with the native legume Acmispon strigosus. We quantified mutualism traits of 85 Bradyrhizobium isolates gathered from a 700 km transect in California spanning 10 sampled A. strigosus populations. We clonally inoculated each Bradyrhizobium isolate onto A. strigosus hosts and quantified nodulation capacity and net effects of infection, including host growth and isotopic nitrogen concentration. Six Bradyrhizobium isolates from five populations were categorized as ineffective because they formed nodules but did not enhance host growth via nitrogen fixation. Six additional isolates from three populations failed to form root nodules. Phylogenetic reconstruction inferred two types of mutualism breakdown, including three to four independent losses of effectiveness and five losses of nodulation capacity on A. strigosus. The evolutionary and genomic drivers of these mutualism breakdown events remain poorly understood
Biomechanical analysis of a synthetic femoral spiral fracture model: Do end caps improve retrograde flexible intramedullary nail fixation?
<p>Abstract</p> <p>Background</p> <p>Elastic Stable intramedullary Nailing (ESIN) of dislocated diaphyseal femur fractures has become an accepted method for the treatment in children and adolescents with open physis. Studies focused on complications of this technique showed problems regarding stability, usually in complex fracture types such as spiral fractures and in older children weighing > 40 kg. Biomechanical in vitro testing was performed to evaluate the stability of simulated spiral femoral fractures after retrograde flexible titanium intramedullary nail fixation with and without End caps.</p> <p>Methods</p> <p>Eight synthetic adolescent-size femoral bone models (Sawbones<sup>Ā® </sup>with a medullar canal of 10 mm and a spiral fracture of 100 mm length identically sawn by the manufacturer) were used for each group. Both groups underwent retrograde fixation with two 3.5 mm Titanium C-shaped nails inserted from medial and lateral entry portals. In the End Cap group the ends of the nails of the eight specimens were covered with End Caps (Synthes Company, Oberdorf, Switzerland) at the distal entry.</p> <p>Results</p> <p>Beside posterior-anterior stress (4.11 Nm/mm vs. 1.78 Nm/mm, p < 0.001), the use of End Caps demonstrated no higher stability in 4-point bending compared to the group without End Caps (anterior-posterior bending 0.27 Nm/mm vs. 0.77 Nm/mm, p < 0.001; medial-lateral bending 0.8 Nm/mm vs. 1.10 Nm/mm, p < 0.01; lateral-medial bending 0.53 Nm/mm vs. 0.86 Nm/mm, p < 0.001) as well as during internal rotation (0.11 Nm/Ā° vs. 0.14 Nm/Ā°, p < 0.05). During compression in 9Ā°- position and external rotation there was no statistical significant difference (0.37 Nm/Ā° vs. 0.32 Nm/Ā°, p = 0.13 and 1.29 mm vs. 2.18 mm, p = 0.20, respectively) compared to the "classic" 2-C-shaped osteosynthesis without End Caps.</p> <p>Conclusion</p> <p>In this biomechanical study the use of End Caps did not improve the stability of the intramedullary flexible nail osteosynthesis.</p
Review of Student-Built Spectroscopy Instrumentation Projects
Copyright Ā© 2020 American Chemical Society and Division of Chemical Education, Inc. One challenge of teaching chemical analysis is the proliferation of sophisticated, but often impenetrable, instrumentation in the modern laboratory. Complex instruments, and the software that runs them, distance students from the physical and chemical processes that generate the analytical signal. A solution to this challenge is the introduction of a student-driven instrument-building project. Visible absorbance spectroscopy is well-suited to such a project due to its relative simplicity and the ubiquity of absorbance measurements. This Article reviews simple instructor- A nd student-built instruments for spectroscopy, providing an overview of common designs, components, and applications. This comprehensive summary includes options that are suitable for in-person or remote learning with K-12 students and undergraduates in general chemistry, analytical chemistry, instrumental analysis, and electronics courses
Integrable discretizations of some cases of the rigid body dynamics
A heavy top with a fixed point and a rigid body in an ideal fluid are
important examples of Hamiltonian systems on a dual to the semidirect product
Lie algebra . We give a Lagrangian derivation of
the corresponding equations of motion, and introduce discrete time analogs of
two integrable cases of these systems: the Lagrange top and the Clebsch case,
respectively. The construction of discretizations is based on the discrete time
Lagrangian mechanics on Lie groups, accompanied by the discrete time Lagrangian
reduction. The resulting explicit maps on are Poisson with respect to
the Lie--Poisson bracket, and are also completely integrable. Lax
representations of these maps are also found.Comment: arXiv version is already officia
Mechanical Systems with Symmetry, Variational Principles, and Integration Algorithms
This paper studies variational principles for mechanical systems with symmetry and their applications to integration algorithms. We recall some general features of how to reduce variational principles in the presence of a symmetry group along with general features of integration algorithms for mechanical systems. Then we describe some integration algorithms based directly on variational principles using a
discretization technique of Veselov. The general idea for these variational integrators is to directly discretize Hamiltonās principle rather than the equations of motion in a way that preserves the original systems invariants, notably the symplectic form and, via a discrete version of Noetherās theorem, the momentum map. The resulting mechanical integrators are second-order accurate, implicit, symplectic-momentum algorithms. We apply these integrators to the rigid body and the double spherical pendulum to show that the techniques are competitive with existing integrators
BMD-based assessment of local porosity in human femoral cortical bone
Cortical pores are determinants of the elastic properties and of the ultimate strength of bone tissue. An increase of the overall cortical porosity (Ct.Po) as well as the local coalescence of large pores cause an impairment of the mechanical competence of bone Therefore, Ct Po represents a relevant target for identifying patients with high fracture risk. However, given their small size, the in vivo imaging of cortical pores remains challenging. The advent of modern high-resolution peripheral quantitative computed tomography (HR-pQCT) triggered new methods for the clinical assessment of Ct Po at the peripheral skeleton, either by pore segmentation or by exploiting local bone mineral density (BMD) In this work, we compared BMD-based Ct.Po estimates with highresolution reference values measured by scanning acoustic microscopy. A calibration rule to estimate local Ct.Po from BMD as assessed by HR-pQCT was derived experimentally. Within areas of interest smaller than 0.5 mm(2), our model was able to estimate the local Ct.Po with an error of 3.4%. The incorporation of the BMD mhomogeneity and of one parameter from the BMD distribution of the entire scan volume led to a relative reduction of the estimate error of 30%, if compared to an estimate based on the average BMD. When applied to the assessment of Ct.Po within entire cortical bone cross-sections, the proposed BMD-based method had better accuracy than measurements performed with a conventional threshold-based approach.</p
Bereavement in critical care: A narrative review and practice exploration of current provision of support services and future challenges
Ā© The Intensive Care Society 2020. This is the accepted manuscript version of an article which has been published in final form at https://doi.org/10.1177%2F1751143720928898This special article outlines the background to bereavement in critical care and scopes the current provision and evidence for bereavement support following death in critical care. Co-authored by a family member and former critical care patient, we aim to draw out the current challenges and think about how and where support can be implemented along the bereavement pathway. We draw on the literature to examine different trajectories of dying in critical care and explore how these might impact bereavement, highlighting important points and risk factors for complicated grief. We present graphic representation of the critical junctures for bereavement in critical care. Adjustment disorders around grief are explored and the consequences for families, including the existing evidence base. Finally, we propose new areas for research in this field.Peer reviewedFinal Accepted Versio
- ā¦