58 research outputs found
Oxidation kinetics of hercynite spinels for solar thermochemical fuel production
The development of an economically viable solar thermochemical fuel production process relies largely on identifying redox active materials with optimized thermodynamic and kinetic properties. Iron aluminate (FeAl2O4, hercynite) and cobalt-iron aluminate (CoxFe1-xAl2O4) have both been demonstrated as viable redox-active materials for this process. However, doping with cobalt creates a tradeoff between the thermodynamics and kinetics of H2 production mediated by hercynite in which the kinetics are improved at the expense of lowering the yield. In this work, we evaluate four spinel aluminate materials with varying cobalt contents (FeAl2O4, Co0.05Fe0.95Al2O4, Co0.25Fe0.75Al2O4, and Co0.40Fe0.60Al2O4) to better understand the role of cobalt in the redox mediating properties of these materials and to quantify its effect on the thermodynamic and kinetic properties for CO2 reduction. A solid-state kinetic analysis was performed on each sample to model its CO2 reduction kinetics at temperatures ranging from 1200 °C to 1350 °C. An F1 model representative of first-order reaction kinetics was found to most accurately represent the experimental data for all materials evaluated. The computed rate constants, activation energies, and pre-exponential factors all increase with increasing cobalt content. High temperature in-situ XPS was utilized to characterize the spinel surfaces and indicated the presence of metallic states of the reduced cobalt-iron spinel, which are not present in un-doped hercynite. These species provide a new site for the CO2 reduction reaction and enhance its rate through an increased pre-exponential factor
Synthesis and Photoluminescence Property of Silicon Carbide Nanowires Via Carbothermic Reduction of Silica
Silicon carbide nanowires have been synthesized at 1400 °C by carbothermic reduction of silica with bamboo carbon under normal atmosphere pressure without metallic catalyst. X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy and Fourier transformed infrared spectroscopy were used to characterize the silicon carbide nanowires. The results show that the silicon carbide nanowires have a core–shell structure and grow along <111> direction. The diameter of silicon carbide nanowires is about 50–200 nm and the length from tens to hundreds of micrometers. The vapor–solid mechanism is proposed to elucidate the growth process. The photoluminescence of the synthesized silicon carbide nanowires shows significant blueshifts, which is resulted from the existence of oxygen defects in amorphous layer and the special rough core–shell interface
Enhancement of Rydberg-mediated single-photon nonlinearities by electrically tuned Förster resonances
We demonstrate experimentally that Stark-tuned Förster resonances can be used to substantially increase the interaction between individual photons mediated by Rydberg interaction inside an optical medium. This technique is employed to boost the gain of a Rydberg-mediated single-photon transistor and to enhance the non-destructive detection of single Rydberg atoms. Furthermore, our all-optical detection scheme enables high-resolution spectroscopy of two-state Förster resonances, revealing the fine structure splitting of high-n Rydberg states and the non-degeneracy of Rydberg Zeeman substates in finite fields. We show that the ∣50S1/2,48S1/2⟩↔∣49P1/2,48P1/2⟩ pair state resonance in 87Rb enables simultaneously a transistor gain G>100 and all-optical detection fidelity of single Rydberg atoms F>0.8. We demonstrate for the first time the coherent operation of the Rydberg transistor with G>2 by reading out the gate photon after scattering source photons. Comparison of the observed readout efficiency to a theoretical model for the projection of the stored spin wave yields excellent agreement and thus successfully identifies the main decoherence mechanism of the Rydberg transistor
Gauge Theories with Ultracold Atoms
We discuss and review in this chapter the developing field of research of
quantum simulation of gauge theories with ultracold atoms.Comment: Contribution for the proceedings of the Advanced School and Workshop
on "Strongly Coupled Field Theories for Condensed Matter and Quantum
Information Theory" held in Natal from 2-21/8 of 2015. Published in "Springer
Proceedings in Physics" (ISBN 978-3-030-35473-2), with material from the PhD
Thesis of Jo\~ao C. Pinto Barros, available at
https://iris.sissa.it/handle/20.500.11767/57731#.XcQtPk6YWh
Recommended from our members
Helium interactions with alumina formed by atomic layer deposition show potential for mitigating problems with excess helium in spent nuclear fuel
Helium gas accumulation from alpha decay during extended storage of spent fuel has potential to compromise the structural integrity the fuel. Here we report results obtained with surrogate nickel particles which suggest that alumina formed by atomic layer deposition can serve as a low volume-fraction, uniformly-distributed phase for retention of helium generated in fuel particles such as uranium oxide. Thin alumina layers may also form transport paths for helium in the fuel rod, which would otherwise be impermeable. Micron-scale nickel particles, representative of uranium oxide particles in their low helium solubility and compatibility with the alumina synthesis process, were homogeneously coated with alumina approximately 3–20 nm by particle atomic layer deposition (ALD) using a fluidized bed reactor. Particles were then loaded with helium at 800 °C in a tube furnace. Subsequent helium spectroscopy measurements showed that the alumina phase, or more likely a related nickel/alumina interface structure, retains helium at a density of at least 10 atoms/cm . High resolution transmission electron microscopy revealed that the thermal treatment increased the alumina thickness and generated additional porosity. Results from Monte Carlo simulations on amorphous alumina predict the helium retention concentration at room temperature could reach 10 atoms/cm at 400 MPa, a pressure predicted by others to be developed in uranium oxide without an alumina secondary phase. This concentration is sufficient to eliminate bubble formation in the nuclear fuel for long-term storage scenarios, for example. Measurements by others of the diffusion coefficient in polycrystalline alumina indicate values several orders of magnitude higher than in uranium oxide, which then can also allow for helium transport out of the spent fuel. 17 3 21
Recommended from our members
Helium interactions with alumina formed by atomic layer deposition show potential for mitigating problems with excess helium in spent nuclear fuel
Helium gas accumulation from alpha decay during extended storage of spent fuel has potential to compromise the structural integrity the fuel. Here we report results obtained with surrogate nickel particles which suggest that alumina formed by atomic layer deposition can serve as a low volume-fraction, uniformly-distributed phase for retention of helium generated in fuel particles such as uranium oxide. Thin alumina layers may also form transport paths for helium in the fuel rod, which would otherwise be impermeable. Micron-scale nickel particles, representative of uranium oxide particles in their low helium solubility and compatibility with the alumina synthesis process, were homogeneously coated with alumina approximately 3–20 nm by particle atomic layer deposition (ALD) using a fluidized bed reactor. Particles were then loaded with helium at 800 °C in a tube furnace. Subsequent helium spectroscopy measurements showed that the alumina phase, or more likely a related nickel/alumina interface structure, retains helium at a density of at least 1017 atoms/cm3. High resolution transmission electron microscopy revealed that the thermal treatment increased the alumina thickness and generated additional porosity. Results from Monte Carlo simulations on amorphous alumina predict the helium retention concentration at room temperature could reach 1021 atoms/cm3 at 400 MPa, a pressure predicted by others to be developed in uranium oxide without an alumina secondary phase. This concentration is sufficient to eliminate bubble formation in the nuclear fuel for long-term storage scenarios, for example. Measurements by others of the diffusion coefficient in polycrystalline alumina indicate values several orders of magnitude higher than in uranium oxide, which then can also allow for helium transport out of the spent fuel
- …