54,435 research outputs found
Recommended from our members
TDLAS Detection of propane and butane gas over the near-infrared wavelength range from 1678nm to 1686nm
It is important in the petrochemical industry that there are high sensitivity, high accuracy, low-power consumption and intrinsically safe methods for the detection of propane, butane and their gas mixtures, to provide early warning of potential explosion hazards during both storage and transportation of oil and gas. This paper proposes a 'proof of principle' method for the detection of propane and butane using a Tunable Diode Laser Absorption Spectroscopy (TDLAS) technique over the near-infrared wavelength range from 1678nm to 1686nm. This method is relatively inexpensive to implement and is thus more practical, compared with detection methods using wavelengths further into the infra-red, near 3.3μm. The minimum detectable concentration was found to be low as 300ppm for propane or butane. Importantly, the relative measurement errors were all below 3% LEL, which meets the requirements from the petrochemical and oil-gas storage and transportation industries for a field-based system for monitoring of combustible gases
Recommended from our members
A Sensitive and Reliable Carbon Monoxide Monitor for Safety-Focused Applications in Coal Mine Using a 2.33- m Laser Diode
In this paper, a stable and reliable carbon monoxide (CO) monitoring system with high sensitivity (at sub-ppm level) was designed and demonstrated with particular reference to use in the mining industry, tailoring the design specifically for forecasting spontaneous combustion, a major hazard to miners. An appropriate strong CO absorption line was used to minimize the interferences expected from gases present in ambient air, with several preferred CO absorption lines selected and investigated, therefore choosing a distributed feedback (DFB) laser operating at a wavelength of 2330.18 nm as the excitation source. Through a detailed investigation, a minimum detection limit of ~0.2 ppm and a measurement precision of <50 ppb were achieved with a 1 s averaging time. Further in tests, a long-term continuous monitoring evaluation was carried out, demonstrated the excellent stability and reliability of the developed CO monitor. The results obtained have validated the potential of this design of a CO monitoring system for practical monitoring applications underground to enhance safety in the mining industry
Recommended from our members
Study of quasi-distributed optical fiber methane sensors based on laser absorption spectrometry
The coal industry plays an important role in the economic development of China. With the increase of coal mining year by year, coal mine accidents caused by gas explosion also occur frequently, which poses a serious threat to the life safety of absenteeism and national property safety. Therefore, high-precision methane fiber sensor is of great significance to ensure coal mine safety. This paper mainly introduces two kinds of quasi-distributed gas optical fiber sensing systems based on laser absorption spectroscopy. The gas fiber optic sensor based on absorption spectrum has high measurement accuracy, fast response and long service life. One is quasi-distributed optical fiber sensing system based on spatial division multiplexing (SDM) technology and the other is quasi-distributed optical fiber sensing system based on optical time domain reflection and time division multiplexing(TDM) technology
A two component jet model for the X-ray afterglow flat segment in short GRB 051221A
In the double neutron star merger or neutron star-black hole merger model for
short GRBs, the outflow launched might be mildly magnetized and neutron rich.
The magnetized neutron-rich outflow will be accelerated by the magnetic and
thermal pressure and may form a two component jet finally, as suggested by
Vlahakis, Peng & K\"{o}nigl (2003). We show in this work that such a two
component jet model could well reproduce the multi-wavelength afterglow
lightcurves, in particular the X-ray flat segment, of short GRB 051221A. In
this model, the central engine need not to be active much longer than the
prompt ray emission.Comment: 11 pages, 2 figure; Accepted for publication by ApJ
- …