6,541 research outputs found
Distribution of Measuring Points and Piezoelectric Actuators in Flutter Suppression
AbstractSingle input/single output (SISO), single input/multi out put (SIMO) and multi input/multi out put (SIMO) control laws for active flutter suppression are designed and realized in wind tunnel tests. Reasonable agreement between analytical and tested results is achieved. Based on these results, the distribution of response measuring points and piezoelectric actuators is investigated
Sub-daily simulation of mountain flood processes based on the modified soil water assessment tool (SWAT) model
Floods not only provide a large amount of water resources, but they also cause serious disasters. Although there have been numerous hydrological studies on flood processes, most of these investigations were based on rainfall-type floods in plain areas. Few studies have examined high temporal resolution snowmelt floods in high-altitude mountainous areas. The Soil Water Assessment Tool (SWAT) model is a typical semi-distributed, hydrological model widely used in runoff and water quality simulations. The degree-day factor method used in SWAT utilizes only the average daily temperature as the criterion of snow melting and ignores the influence of accumulated temperature. Therefore, the influence of accumulated temperature on snowmelt was added by increasing the discriminating conditions of rain and snow, making that more suitable for the simulation of snowmelt processes in high-altitude mountainous areas. On the basis of the daily scale, the simulation of the flood process was modeled on an hourly scale. This research compared the results before and after the modification and revealed that the peak error decreased by 77% and the time error was reduced from +/- 11 h to +/- 1 h. This study provides an important reference for flood simulation and forecasting in mountainous areas
On the Matrix Element of the Transverse Component of Bilocal Vector Current and its Parton Interpretation
In this paper we study the matrix element of the transverse component of the
bilocal vector current in the context of deep inelastic scattering. BJL limit
of high energy amplitudes together with light-front current algebra imply the
same parton interpretation for its matrix element as that of the plus
component. On the other hand, the transverse component depends explicitly on
the gluon field operator in QCD, appears as "twist three" and hence its matrix
element has no manifest parton interpretation. In this paper we perform
calculations in light-front time-ordering perturbative QCD for a dressed quark
target to order and demonstrate that the matrix element of the
transverse component of the bilocal vector current has the same parton
interpretation as that of the plus component.Comment: 7 pages, REVTE
Phenylboronic acid-diol crosslinked 6-<i>O</i>-vinylazeloyl-d-galactose nanocarriers for insulin delivery
A new block polymer named poly 3-acrylamidophenylboronic acid-b-6-O–vinylazeloyl-d-galactose (p(AAPBA-b-OVZG)) was prepared using 3-acrylamidophenylboronic acid (AAPBA) and 6-O-vinylazeloyl-D-galactose (OVZG) via a two-step procedure involving S-1-dodecyl-S-(α', α'-dimethyl-α″-acetic acid) trithiocarbonate (DDATC) as chain transfer agent, 2,2-azobisisobutyronitrile (AIBN) as initiator and dimethyl formamide (DMF) as solvent. The structures of the polymer were examined by Fourier transform infrared spectroscopy (FT-IR) and 1H NMR and the thermal stability was determined by thermal gravimetric analysis (TG/DTG). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were utilized to evaluate the morphology and properties of the p(AAPBA-b-OVZG) nanoparticles. The cell toxicity, animal toxicity and therapeutic efficacy were also investigated. The results indicate the p(AAPBA-b-OVZG) was successfully synthesized and had excellent thermal stability. Moreover, the p(AAPBA-b-OVZG) nanoparticles were submicron in size and glucose-sensitive in phosphate-buffered saline (PBS). In addition, insulin as a model drug had a high encapsulation efficiency and loading capacity and the release of insulin was increased at higher glucose levels. Furthermore, the nanoparticles showed a low-toxicity in cell and animal studies and they were effective at decreasing blood glucose levels of mice over 96 h. These p(AAPBA-b-OVZG) nanoparticles show promise for applications in diabetes treatment using insulin or other hypoglycemic proteins
Accurate simulation of ice and snow runoff for the mountainous terrain of the Kunlun Mountains, China
While mountain runoff provides great potential for the development and life quality of downstream populations, it also frequently causes seasonal disasters. The accurate modeling of hydrological processes in mountainous areas, as well as the amount of meltwater from ice and snow, is of great significance for the local sustainable development, hydropower regulations, and disaster prevention. In this study, an improved model, the Soil Water Assessment Tool with added ice-melt module (SWATAI) was developed based on the Soil Water Assessment Tool (SWAT), a semi-distributed hydrological model, to simulate ice and snow runoff. A temperature condition used to determine precipitation types has been added in the SWATAI model, along with an elevation threshold and an accumulative daily temperature threshold for ice melt, making it more consistent with the runoff process of ice and snow. As a supplementary reference, the comparison between the normalized difference vegetation index (NDVI) and the quantity of meltwater were conducted to verify the simulation results and assess the impact of meltwater on the ecology. Through these modifications, the accuracy of the daily flow simulation results has been considerably improved, and the contribution rate of ice and snow melt to the river discharge calculated by the model increased by 18.73%. The simulation comparison of the flooding process revealed that the accuracy of the simulated peak flood value by the SWATAI was 77.65% higher than that of the SWAT, and the temporal accuracy was 82.93% higher. The correlation between the meltwater calculated by the SWATAI and the NDVI has also improved significantly. This improved model could simulate the flooding processes with high temporal resolution in alpine regions. The simulation results could provide technical support for economic benefits and reasonable reference for flood prevention
Thermal-Mechanical Properties of Polyurethane-Clay Shape Memory Polymer Nanocomposites
Shape memory nanocomposites of polyurethane (PU)-clay were fabricated by melt mixing of PU and nano-clay. Based on nano-indentation and microhardness tests, the strength of the nanocomposites increased dramatically as a function of clay content, which is attributed to the enhanced nanoclay–polymer interactions. Thermal mechanical experiments demonstrated good mechanical and shape memory effects of the nanocomposites. Full shape memory recovery was displayed by both the pure PU and PU-clay nanocomposites.
Combined effects of permeability and fluid saturation on seismic wave dispersion and attenuation in partially-saturated sandstone
Knowledge of dispersion and attenuation is essential for better reservoir characterization and hydrocarbon identification. However, limited by reliable laboratory data at seismic frequency bands, the roles of rock and fluid properties in inducing dispersion and attenuation are still poorly understood. Here we perform a series of laboratory measurements on Bentheimer and Bandera sandstone under both vacuum-dry and partially water-saturated conditions at frequencies ranging from 2 to 600 Hz. At vacuum-dry conditions, the bulk dispersion and attenuation in Bandera sandstone with more clay contents are distinctly larger than those in Bentheimer sandstone, suggesting clay contents might contribute to the inelasticity of the rock frame. The partially water-saturated results show the combined effects of rock permeability and fluid saturation on bulk dispersion and attenuation. Even a few percent of gas can substantially dominate the pore-fluid relaxation by providing a quick and short communication path for pore pressure gradients. The consequent bulk dispersion and attenuation are negligible. Only as the samples are approaching fully water-saturated conditions, rock permeability begins to play an essential role in the pore-fluid relaxation. For Bandera sandstone with lower permeability, a partially relaxed status of pore fluids is achieved when the gas saturation is lower than 5%, accompanied by significant attenuation and dispersion.Cited as: Wei, Q., Wang, Y., Han, D., Sun, M., Huang, Q. Combined effects of permeability and fluid saturation on seismic wave dispersion and attenuation in partially-saturated sandstone. Advances in Geo-Energy Research, 2021, 5(2): 181-190, doi: 10.46690/ager.2021.02.0
Canonical interpretation of the state within the model
Recently, the LHCb Collaboration has confirmed the state , with a
mass ~MeV, and a much larger width
~MeV than the previous experimental measurements,
which has confused the understanding of its nature. We will investigate the
possibility of the interpretation for the ,
considering the mass spectra predicted in the quark model, and the strong decay
properties within the model. We also predict the strong decay
properties of the charmonium states and . Our
results show that the state with the small width given in PDG can be
explained as the charmonium state in the model, and
high precision measurement of the width of the is crucial to
understand its nature.Comment: 9 pages, 3 figures, the version to be published in EPJ
- …