Paleotectonic control of reservoir facies

The basement structural fabric of the Paradox basin affected sedimentary facies throughout Phanerozoic time. Continental-scale basement wrench-fault zones were rejuvenated repeatedly throughout the Paleozoic. The Paradox pull-apart evaporite basin was formed along the northwest-southeast-trending Paradox-Wichita lineament in Middle Pennsylvanian time, facilitated by basement faults of the northeast-southwest-trending Colorado lineament. Structurally controlled shoaling conditions, formed by reactivation of basement faults, fostered marine sandstone reservoirs in Late Devonian time, crinoidal buildups in the Early Mississippian, and phylloid-algae mounds in Middle Pennsylvanian time. Apparently similar basement wrench-fault zones are present in Kansas. The midcontinent rift system is a north-northeast-south-southwest-trending fault zone that was reactivated during the Paleozoic. Northwest-southeast-trending faults along the Central Kansas-Bourbon arch complex appear to have offset structures of the midcontinent rift. Both trends are interpreted to be continental-scale conjugate wrench-fault zones with sinistral displacement along the midcontinent rift and dextral displacement along the Central Kansas-Bourbon arch complex. Stratigraphic relationships suggest repeated reactivation before Pennsylvanian uplift and erosion along the major structures. In both regions major structural lineaments are associated with smaller-scale fault patterns. Reactivation of these structures through time created paleotectonic trapping conditions at several stratigraphic intervals. Evidence is accumulating in Kansas that tectonically controlled paleotopography and paleobathymetry are major predictable factors in reservoir localization. Recognition of reactivated basement structural fabrics can provide* significant constraints on reservoir characterization and modeling

Paleotectonic control of reservoir facies

The basement structural fabric of the Paradox basin affected sedimentary facies throughout Phanerozoic time. Continental-scale basement wrench-fault zones were rejuvenated repeatedly throughout the Paleozoic. The Paradox pull-apart evaporite basin was formed along the northwest-southeast-trending Paradox-Wichita lineament in Middle Pennsylvanian time, facilitated by basement faults of the northeast-southwest-trending Colorado lineament. Structurally controlled shoaling conditions, formed by reactivation of basement faults, fostered marine sandstone reservoirs in Late Devonian time, crinoidal buildups in the Early Mississippian, and phylloid-algae mounds in Middle Pennsylvanian time. Apparently similar basement wrench-fault zones are present in Kansas. The midcontinent rift system is a north-northeast-south-southwest-trending fault zone that was reactivated during the Paleozoic. Northwest-southeast-trending faults along the Central Kansas-Bourbon arch complex appear to have offset structures of the midcontinent rift. Both trends are interpreted to be continental-scale conjugate wrench-fault zones with sinistral displacement along the midcontinent rift and dextral displacement along the Central Kansas-Bourbon arch complex. Stratigraphic relationships suggest repeated reactivation before Pennsylvanian uplift and erosion along the major structures. In both regions major structural lineaments are associated with smaller-scale fault patterns. Reactivation of these structures through time created paleotectonic trapping conditions at several stratigraphic intervals. Evidence is accumulating in Kansas that tectonically controlled paleotopography and paleobathymetry are major predictable factors in reservoir localization. Recognition of reactivated basement structural fabrics can provide* significant constraints on reservoir characterization and modeling

Computer simulation of Upper Pennsylvanian (Missourian) carbonate-dominated cycles in western Kansas

We describe a personal computer-based one-dimensional process (forward) stratigraphic model that simulates Upper Pennsylvanian marine carbonate-dominated cycles on a ramp shelf in western Kansas. Here we describe the logic and methodology behind the model, key concepts and parameters used in modeling, and three examples. The model parameters include a glacial-eustatic curve, tectonic subsidence, and sedimentation rates. The Pleistocene sea-level curve serves as a proxy to Pennsylvanian sea level, as used in the present model. Pennsylvanian sedimentation is estimated according to potential accumulation rates of Recent sediments. Rapid sea-level rise leads to attenuation of carbonate sedimentation, and the associated increased productivity of organic matter often results in black shale accumulation, a hallmark of the Pennsylvanian cycles. Simulation of cycles could prove useful in predicting petroleum reservoir development as sophistication of the modeling and knowledge of the processes increase. Inverse techniques will be useful to this end so that parameters can be obtained that permit models to depict characteristics of individual cycles more precisely and accurately

Computer simulation of Upper Pennsylvanian (Missourian) carbonate-dominated cycles in western Kansas

We describe a personal computer-based one-dimensional process (forward) stratigraphic model that simulates Upper Pennsylvanian marine carbonate-dominated cycles on a ramp shelf in western Kansas. Here we describe the logic and methodology behind the model, key concepts and parameters used in modeling, and three examples. The model parameters include a glacial-eustatic curve, tectonic subsidence, and sedimentation rates. The Pleistocene sea-level curve serves as a proxy to Pennsylvanian sea level, as used in the present model. Pennsylvanian sedimentation is estimated according to potential accumulation rates of Recent sediments. Rapid sea-level rise leads to attenuation of carbonate sedimentation, and the associated increased productivity of organic matter often results in black shale accumulation, a hallmark of the Pennsylvanian cycles. Simulation of cycles could prove useful in predicting petroleum reservoir development as sophistication of the modeling and knowledge of the processes increase. Inverse techniques will be useful to this end so that parameters can be obtained that permit models to depict characteristics of individual cycles more precisely and accurately

Shear-wave anisotropy reveals pore fluid pressure–induced seismicity in the U.S. midcontinent

Seismicity in the U.S. midcontinent has increased by orders of magnitude over the past decade. Spatiotemporal correlations of seismicity to wastewater injection operations have suggested that injection-related pore fluid pressure increases are inducing the earthquakes. We present direct evidence linking earthquake occurrence to pore pressure increase in the U.S. midcontinent through time-lapse shear-wave (S-wave) anisotropy analysis. Since the onset of the observation period in 2010, the orientation of the fast S-wave polarization has flipped from inline with the maximum horizontal stress to inline with the minimum horizontal stress, a change known to be associated with critical pore pressure buildup. The time delay between fast and slow S-wave arrivals exhibits increased variance through time, which is common in critical pore fluid settings. Near-basement borehole fluid pressure measurements indicate pore pressure increase in the region over the earthquake monitoring period

Suitability of high-resolution seismic method to identifying petroleum reservoirs in Kansas--a geological perspective

Kansas has been a part of a stable craton since at least the beginning of the Paleozoic some 550 m. y. ago. The majority of the sedimentary rocks deposited during the last 550 m. y. are products of numerous inundations by shallow seas. Interspersed with these transgressions were periods of erosion, many coinciding with widespread uplift. The distribution of reservoir-quality rocks has been controlled by the varying structural and depositional settings in both time and space. The identification of these reservoirs begins with a knowledge of the geologic history as detailed by the vast subsurface information base, mainly wire line logs and completion records, that is available for Kansas. Seismic profiling has been and will continue to be used effectively to resolve structural traps. The trend in exploration in the midcontinent has been to strengthen the search for reservoirs associated with more subtle structures and difficult-to-find stratigraphic traps. Stratigraphic traps will become increasingly important, particularly within established production trends. The many unconformities in the midcontinent stratigraphic column afford numerous types of trapping geometry such as truncation beneath an unconformity, traps associated with buried valleys, discontinuous onlap onto erosion surfaces, and porosity pinchouts due to changes in original depositional conditions and diagenetic alteration. The most widespread petroleum accumulations in Kansas occur in structural and stratigraphic traps associated with the pre-Pennsylvanian unconformity. Production associated with the unconformity includes numerous lower Paleozoic pay zones which subcrop directly beneath the unconformity in the Sedgwick, Salina, and Anadarko basins; the Arbuckle production on the Central Kansas uplift; and numerous fields which payout from either conglomerates or weathered zones along the unconformity. Considerable production also occurs farther up-section with the Cherokee and Lansing-Kansas City groups, and down-section in the Viola Formation and Simpson Group. In order to demonstrate the potential use of the seismic method in defining subtle traps, synthetic seismograms were produced for selected strata in central Kansas. Critical attributes of reservoir rock and associated strata conducive to seismic stratigraphic processing include the thickness of a potential reservoir bed and its velocity and density contrast with adjacent strata. Thicker strata such as the Morrow and most lower Paleozoic formations may be more easily defined by seismic-stratigraphic methods. In contrast, the stratigraphy of the Pennsylvanian and Permian cyclothems may not be amenable to definition by seismic methods because these units contain heterogenous reservoirs interbedded with other thin strata of similar composition

Suitability of high-resolution seismic method to identifying petroleum reservoirs in Kansas--a geological perspective

Kansas has been a part of a stable craton since at least the beginning of the Paleozoic some 550 m. y. ago. The majority of the sedimentary rocks deposited during the last 550 m. y. are products of numerous inundations by shallow seas. Interspersed with these transgressions were periods of erosion, many coinciding with widespread uplift. The distribution of reservoir-quality rocks has been controlled by the varying structural and depositional settings in both time and space. The identification of these reservoirs begins with a knowledge of the geologic history as detailed by the vast subsurface information base, mainly wire line logs and completion records, that is available for Kansas. Seismic profiling has been and will continue to be used effectively to resolve structural traps. The trend in exploration in the midcontinent has been to strengthen the search for reservoirs associated with more subtle structures and difficult-to-find stratigraphic traps. Stratigraphic traps will become increasingly important, particularly within established production trends. The many unconformities in the midcontinent stratigraphic column afford numerous types of trapping geometry such as truncation beneath an unconformity, traps associated with buried valleys, discontinuous onlap onto erosion surfaces, and porosity pinchouts due to changes in original depositional conditions and diagenetic alteration. The most widespread petroleum accumulations in Kansas occur in structural and stratigraphic traps associated with the pre-Pennsylvanian unconformity. Production associated with the unconformity includes numerous lower Paleozoic pay zones which subcrop directly beneath the unconformity in the Sedgwick, Salina, and Anadarko basins; the Arbuckle production on the Central Kansas uplift; and numerous fields which payout from either conglomerates or weathered zones along the unconformity. Considerable production also occurs farther up-section with the Cherokee and Lansing-Kansas City groups, and down-section in the Viola Formation and Simpson Group. In order to demonstrate the potential use of the seismic method in defining subtle traps, synthetic seismograms were produced for selected strata in central Kansas. Critical attributes of reservoir rock and associated strata conducive to seismic stratigraphic processing include the thickness of a potential reservoir bed and its velocity and density contrast with adjacent strata. Thicker strata such as the Morrow and most lower Paleozoic formations may be more easily defined by seismic-stratigraphic methods. In contrast, the stratigraphy of the Pennsylvanian and Permian cyclothems may not be amenable to definition by seismic methods because these units contain heterogenous reservoirs interbedded with other thin strata of similar composition

Precambrian nomenclature in Kansas

The informal stratigraphic term “Precambrian” is replaced by formal nomenclature—Proterozoic and Archean Eonothems/Eons—and the informal term Hadean. The Phanerozoic Eonothem/Eon, representing all rocks younger than the Proterozoic, is added. The Proterozoic is further divided into Paleoproterozoic, Mesoproterozoic, and Neoproterozoic Erathems/Eras. The name Rice Formation (Scott, 1966) is abandoned, and the use of the informal term “Rice unit” is recommended. The proposed name Rice Series (Berendsen, 1994) is not accepted. These changes are adopted by the Kansas Geological Survey (KGS) and the stratigraphic nomenclature of Zeller (1968) has been revised accordingly

Clarification and Changes in Permian Stratigraphic Nomenclature in Kansas

This paper outlines Permian nomenclature changes to Zeller (1968) that have been adopted by the Kansas Geological Survey. The Permian System/Period, Cisuralian Series/Epoch, and Asselian Stage/Age are established at the base of the Bennett Shale Member of the Red Eagle Limestone. Series/epoch names Wolfcampian, Leonardian, and Guadalupian are retained and usage of Gearyan, Cimarronian, and Custerian is abandoned. The repositioned Carboniferous-Permian boundary divides the Council Grove Group into Carboniferous (Upper Pennsylvanian Series/Epoch; Virgilian Stage/Age) and Permian (Wolfcampian Series/Epoch) segments

Improving Geologic and Engineering Models of Midcontinent Fracture and Karst-Modified Reservoirs Using New 3-D Seismic Attributes

Our project goal was to develop innovative seismic-based workflows for the incremental recovery of oil from karst-modified reservoirs within the onshore continental United States. Specific project objectives were: (1) to calibrate new multi-trace seismic attributes (volumetric curvature, in particular) for improved imaging of karst-modified reservoirs, (2) to develop attribute-based, cost-effective workflows to better characterize karst-modified carbonate reservoirs and fracture systems, and (3) to improve accuracy and predictiveness of resulting geomodels and reservoir simulations. In order to develop our workflows and validate our techniques, we conducted integrated studies of five karst-modified reservoirs in west Texas, Colorado, and Kansas. Our studies show that 3-D seismic volumetric curvature attributes have the ability to re-veal previously unknown features or provide enhanced visibility of karst and fracture features compared with other seismic analysis methods. Using these attributes, we recognize collapse features, solution-enlarged fractures, and geomorphologies that appear to be related to mature, cockpit landscapes. In four of our reservoir studies, volumetric curvature attributes appear to delineate reservoir compartment boundaries that impact production. The presence of these compartment boundaries was corroborated by reservoir simulations in two of the study areas. Based on our study results, we conclude that volumetric curvature attributes are valuable tools for mapping compartment boundaries in fracture- and karst-modified reservoirs, and we propose a best practices workflow for incorporating these attributes into reservoir characterization. When properly calibrated with geological and production data, these attributes can be used to predict the locations and sizes of undrained reservoir compartments. Technology transfer of our project work has been accomplished through presentations at professional society meetings, peer-reviewed publications, Kansas Geological Survey Open-file reports, Master's theses, and postings on the project website: http://www.kgs.ku.edu/SEISKARST