Application of integral operators in the numerical solution of elliptic boundary value problems

Imperial Users onl

The application of the ventilation equations to cleanrooms - Part 2: Decay of contamination

This article is the second of a three-part series that investigates the application of the ventilation equations to designing and testing cleanrooms. This part is concerned with the decay equation. The recovery test, described in ISO 14644-3 (2005) is discussed, and improvements recommended. The application of the decay equation to the ‘clean up’ requirement given in the EU GGMP (2008) is also discussed. Finally, a method is considered that calculates the time needed for airborne contamination in cleanroom areas to decay to acceptable concentrations

Decay of airborne contamination and ventilation effectiveness of cleanrooms

This article reports an investigation into the ability of the air supply in non-unidirectional cleanrooms to aid recovery from episodes of airborne contamination, and minimise airborne contamination at important locations. The ISO 14644-3 (2005) recovery test, which measures the rate of decay of test particles, was assessed and a reinterpretation of the test results suggested. This allowed air change effectiveness indexes to be calculated and used to evaluate the ventilation effectiveness of the cleanroom’s air supply. Air change effectiveness indexes were measured in various designs of cleanrooms, and reasons for deviations in the value of the indexes investigated

Control algorithms for aerobraking in the Martian atmosphere

The Analytic Predictor Corrector (APC) and Energy Controller (EC) atmospheric guidance concepts were adapted to control an interplanetary vehicle aerobraking in the Martian atmosphere. Changes are made to the APC to improve its robustness to density variations. These changes include adaptation of a new exit phase algorithm, an adaptive transition velocity to initiate the exit phase, refinement of the reference dynamic pressure calculation and two improved density estimation techniques. The modified controller with the hybrid density estimation technique is called the Mars Hybrid Predictor Corrector (MHPC), while the modified controller with a polynomial density estimator is called the Mars Predictor Corrector (MPC). A Lyapunov Steepest Descent Controller (LSDC) is adapted to control the vehicle. The LSDC lacked robustness, so a Lyapunov tracking exit phase algorithm is developed to guide the vehicle along a reference trajectory. This algorithm, when using the hybrid density estimation technique to define the reference path, is called the Lyapunov Hybrid Tracking Controller (LHTC). With the polynomial density estimator used to define the reference trajectory, the algorithm is called the Lyapunov Tracking Controller (LTC). These four new controllers are tested using a six degree of freedom computer simulation to evaluate their robustness. The MHPC, MPC, LHTC, and LTC show dramatic improvements in robustness over the APC and EC

High voltage solar array study Final report

High voltage solar array stud

The effects of acceleration stress on human workload and manual control

The effects of +Gz stress on operator task performance and workload were assessed. Subjects were presented a two dimensional maze and were required to solve it as rapidly as possible (by moving a light dot through it via a trim switch on a control stick) while under G-stress at levels from +1 Gz to +6 Gz. The G-stress was provided by a human centrifuge. The effects of this stress were assessed by two techniques; (1) objective performance measures on the primary maze-solving task, and (2) subjective workload measures obtained using the subjective workload assessment technique (SWAT). It was found that while neither moderate (+3 Gz) nor high (+5 Gz and +6 Gz) levels of G-stress affected maze solving performance, the high G levels did increase significantly the subjective workload of the maze task

Calculation of air supply rates and concentrations of airborne contamination in non-UDAF cleanrooms

This article reviews a series of scientific articles written by the authors, where the following topics were investigated in relation to non-unidirectional airflow cleanrooms. (1) The air supply rate required to obtain a specified concentration of airborne contamination. (2) The calculation of concentrations of airborne contaminants in different ventilation and dispersion of contamination situations. (3) The decay of airborne contamination (a) during the ‘clean up’ test described in Annex 1 of the EU Guidelines to Good Manufacturing Practice (2008); (b) during the recovery rate test described in Annex B12 of ISO 14644-3 (2005); (c) associated with clean areas, such as airlocks, to reduce airborne contamination before a door into a cleanroom is opened. Worked examples are provided to demonstrate the calculation methods to provide solutions to the above topics

High-efficiency heteroepitaxial InP solar cells

High-efficiency, thin-film InP solar cells grown heteroepitaxially on GaAs and Si single-crystal bulk substrates are being developed as a means of eliminating the problems associated with using single-crystal InP substrates. A novel device structure employing a compositionally graded Ga(x)In(1-x)As layer between the bulk substrate and the InP cell layers is used to reduce the dislocation density and improve the minority carrier properties in the InP. The structures are grown in a continuous sequence of steps using computer-controlled atmospheric pressure metalorganic vapor phase epitaxy (APMOVPE). Dislocation densities as low as 3 x 10(exp 7) sq cm and minority carrier lifetimes as high as 3.3 ns are achieved in the InP layers with this method using both GaAs or Si substrates. Structures prepared in this fashion are also completely free of microcracks. These results represent a substantial improvement in InP layer quality when compared to heteroepitaxial InP prepared using conventional techniques such as thermally cycled growth and post-growth annealing. The present work is is concerned with the fabrication and characterization of high-efficiency, thin-film InP solar cells. Both one-sun and concentrator cells were prepared for device structures grown on GaAs substrates. One-cell cells have efficiencies as high as 13.7 percent at 25 C. However, results for the concentrator cells are emphasized. The concentrator cell performance is characterized as a function of the air mass zero (AM0) solar concentration ratio and operating temperature. From these data, the temperature coefficients of the cell performance parameters are derived as a function of the concentration ratio. Under concentration, the cells exhibit a dramatic increase in efficiency and an improved temperature coefficient of efficiency. At 25 C, a peak conversion efficiency of 18.9 percent is reported. At 80 C, the peak AM0 efficiency is 15.7 percent at 75.6 suns. These are the highest efficiencies yet reported for InP heteroepitaxial cells. Approaches for further improving the cell performance are discussed