The Design and Numerical Study of a 2MWh Molten Salt Thermocline Tank

AbstractThe two tank molten salt thermal storage system is widely used in the commercialized solar thermal power plant. However, the thermocline storage system with a low-cost filler material is a more economically feasible option. In this study, a transient two-dimensional and two-temperature model is developed to investigate the heat transfer and fluid dynamics in a molten salt thermocline thermal storage system. After model validation, the effects of inlet flow boundary condition and storage medium properties including fluid and solid materials on the thermal performance of thermocline storage system are investigated. The results show that thermoclne thickness increases slowest with solar salt as heat transfer fluid (HTF) and Cofalit® as solid material in the thermocline tank. Any non-uniformity in the inlet velocity flow would only enhance mixing and widen the thermocline appreciably, which contributes to the loss of thermodynamic availability of stored energy. The thermocline thickness increases with the non-uniformity of the inlet velocity boundary condition. So smaller non-uniformity of inlet flow is better in non-uniform flow though it may causes larger fluctuations in average outlet temperature. Smaller inlet mass flow rate is better for the thermocline storage tank, while it also causes smaller discharging power. With the chosen basic design parameters such as fluid and solid materials, the size of a 2MWh thermocline tank is determined by a simple one-dimensional design method. Tank with larger H/D ratio has higher discharge efficiency. It helps to figure out the thermal stratification mechanism of a storage tank and thereby to determine optimum design and operating conditions

Effect of Intensity Modulator Extinction on Practical Quantum Key Distribution System

We study how the imperfection of intensity modulator effects on the security of a practical quantum key distribution system. The extinction ratio of the realistic intensity modulator is considered in our security analysis. We show that the secret key rate increases, under the practical assumption that the indeterminable noise introduced by the imperfect intensity modulator can not be controlled by the eavesdropper.Comment: 6 pages, 5 figures. EPJD accepte

HUBUNGAN DUKUNGAN KELUARGA DENGAN TINGKAT DEPRESI PADA NARAPIDANA NAPZA DI RUTAN KELAS IIB KAJHU ACEH BESAR

Banda Ace

The newly observed open-charm states in quark model

Comparing the measured properties of the newly observed open-charm states D(2550), D(2600), D(2750), D(2760), D_{s1}(2710), D_{sJ}(2860), and D_{sJ}(3040) with our predicted spectroscopy and strong decays in a constituent quark model, we find that: (1) the D(2\,^1S_0) assignment to D(2550) remains open for its too broad width determined by experiment; (2) the D(2600) and $D_{s1}(2710)$ can be identified as the 2\,^3S_1-1\,^3D_1 mixtures; (3) if the D(2760) and D(2750) are indeed the same resonance, they would be the D(1\,^3D_3); otherwise, they could be assigned as the D(1\,^3D_3) and $D^\prime_2(1D)$, respectively; (4) the $D_{sJ}(2860)$ could be either the $D_{s1}(2710)$'s partner or the D_s(1\,^3D_3); and (5) both the $D_{s1}(2P)$ and $D^\prime_{s1}(2P)$ interpretations for the $D_{sJ}(3040)$ seem likely. The $E1$ and $M1$ radiative decays of these sates are also studied. Further experimental efforts are needed to test the present quarkonium assignments for these new open-charm states.Comment: 26 pages,7 figures, journal versio

From Fractional Chern Insulators to a Fractional Quantum Spin Hall Effect

We investigate the algebraic structure of flat energy bands a partial filling of which may give rise to a fractional quantum anomalous Hall effect (or a fractional Chern insulator) and a fractional quantum spin Hall effect. Both effects arise in the case of a sufficiently flat energy band as well as a roughly flat and homogeneous Berry curvature, such that the global Chern number, which is a topological invariant, may be associated with a local non-commutative geometry. This geometry is similar to the more familiar situation of the fractional quantum Hall effect in two-dimensional electron systems in a strong magnetic field.Comment: 8 pages, 3 figure; published version with labels in Figs. 2 and 3 correcte

Studies of Static and Dynamic Characteristics of the EDM Machine Based on the ANSYS Workbench

The static and dynamic characteristics of the EDM machine as the main machining unit directlyinfluence the machining accuracy and stability. For a particular type of the EDM machine, the three-dimensional model was built with SolidWorks and the finite element method was employed with the ANSYS Workbench to analyze the static and dynamic characteristics of the machine. The results show that the stiffness of the ram and vertical guide (Z-axis) in the Y and Z directions is the weak side of the machine. The analytical method is proved to be effective for the optimization of the machine design.Установлено, что точность и стабильность обработки зависят от статических и динамических характеристик электроэрозионного станка как основного станочного модуля. Для электроэрозионного станка определенного типа с помощью программного комплекса SolidWorks была построена трехмерная модель, а для анализа его статических и динамических характеристик использовали метод конечных элементов в комбинации с программным комплексом ANSYS. Результаты показывают, что жесткость ползуна и вертикальной направляющей (ось Z) в направлениях Y и Z слабая сторона станка. Доказано, что аналитический метод является эффективным средством оптимизации его конструкции