Semantic Processing Disturbance in Patients with Schizophrenia: A Meta-Analysis of the N400 Component

Background: Theoretically semantic processing can be separated into early automatic semantic activation and late contextualization. Semantic processing deficits have been suggested in patients with schizophrenia, however it is not clear which stage of semantic processing is impaired. We attempted to clarify this issue by conducting a meta-analysis of the N400 component.</p

Thiol-Functionalized Mesoporous Silica for Effective Trap of Mercury in Rats

The chance of exposure to heavy metal for human being rises severely today due to the increasing water contamination and air pollution. Here, we prepared a series of thiol-functionalized mesoporous silica as oral formulation for the prevention and treatment of heavy metal poisoning. The successful incorporation of thiol was verified by the FTIR spectra. SBA15-SH-10 was used for the study as it is of uniform mesopores and fine water dispersibility. In simulated gastrointestinal fluid, the thiol-functionalized mesoporous silica can selectively capture heavy metal, showing a very high affinity for inorganic mercury (II). The blood and urine mercury levels of rats fed with a diet containing Hg (II) and material were significantly lower than those of rats fed with the metal-rich diet only. On the contrary, the mercury content in fecal excretion of the treatment group increased more than twice as much as that of the control group. This result indicated that SBA15-SH-10 could effectively remove mercury (II) in vivo and the mercury loaded on SBA15-SH-10 would be excreted out. Hence, SBA15-SH-10 has potential application in preventing and treating heavy metal poisoning via digestive system

Differential Protein Expression in Small Intestinal Neuroendocrine Tumors and Liver Metastases

OBJECTIVE: Small intestinal neuroendocrine tumors (SI-NETs) are often detected after they have become metastatic. Using a novel protein array, we identified pathways important in SI-NET metastasis development in surgically resected patients. METHODS: Paired primary tumors and liver metastases from 25 patients undergoing surgical resection for metastatic SI-NETs were harvested. Extracted proteins were separated by sodium dodecyl sulfate gel and multiplex immunoblots were performed with 136 antibodies. Significant Analysis of Microarray was used to select for differentially expressed proteins. A tissue microarray was constructed from 27 archived specimens and stained by immunohistochemistry. RESULTS: Comparing primary SI-NETs with matched normal small-bowel mucosa, 9 proteins were upregulated and cyclin E was downregulated. The SI-NET liver metastases demonstrated upregulation of P-ERK and p27 but downregulation of CDK2 and CDC25B. When comparing primary SI-NET with their paired liver metastases, cyclin E demonstrated a significant upregulation in the liver metastasis. Tissue microarray demonstrated higher p38 expression and lower Cdc 25b expression in SI-NETs versus liver metastases and confirmed higher expression of p27 in liver metastases versus normal liver. CONCLUSIONS: Few studies have compared protein expression in paired primary and metastatic SI-NETs. Our findings reveal changes in a limited number of proteins, suggesting that these may be targets for therapy

Combining task-evoked and spontaneous activity to improve pre-operative brain mapping with fMRI

Noninvasive localization of brain function is used to understand and treat neurological disease, exemplified by pre-operative fMRI mapping prior to neurosurgical intervention. The principal approach for generating these maps relies on brain responses evoked by a task and, despite known limitations, has dominated clinical practice for over 20years. Recently, pre-operative fMRI mapping based on correlations in spontaneous brain activity has been demonstrated, however this approach has its own limitations and has not seen widespread clinical use. Here we show that spontaneous and task-based mapping can be performed together using the same pre-operative fMRI data, provide complimentary information relevant for functional localization, and can be combined to improve identification of eloquent motor cortex. Accuracy, sensitivity, and specificity of our approach are quantified through comparison with electrical cortical stimulation mapping in eight patients with intractable epilepsy. Broad applicability and reproducibility of our approach are demonstrated through prospective replication in an independent dataset of six patients from a different center. In both cohorts and every individual patient, we see a significant improvement in signal to noise and mapping accuracy independent of threshold, quantified using receiver operating characteristic curves. Collectively, our results suggest that modifying the processing of fMRI data to incorporate both task-based and spontaneous activity significantly improves functional localization in pre-operative patients. Because this method requires no additional scan time or modification to conventional pre-operative data acquisition protocols it could have widespread utility

Understanding large plastic deformation of SiC nanowires at room temperature

Tensile behaviors of SiC [111] nanowires with various possible microstructures have been investigated by molecular-dynamics simulations. The results show that the large plastic deformation in these nanowires is induced by the anti-parallel sliding of 3C grains along an ultra- thin intergranular amorphous film parallel to the (11¯1) plane and inclined at an angle of 19.47◦ with respect to the nanowire axis. The resulting large plastic deformation of SiC nanowires at room temperature is attributed to the stretching, breaking and re-forming of Si–C bonds in the intergranular amorphous film, which is also evident from the sawtooth jumps in the stress-strain response

Designing ultrafine lamellar eutectic structure in bimodal titanium alloys by semi-solid sintering

We report on a novel approach to design typical ultrafine lamellar eutectic structure in bimodal alloys fabricated by semi-solid sintering (SSS) of a eutectic mixture. In our work ultrafine lamellar eutectic structure was implemented by controlling the phase composition of eutectic reaction and consequently by regulating the structure of eutectic reaction-induced liquid phase through varying component number. Microstructure analysis indicate that although all SSSed alloys have the same three phase constitutions of bcc beta-Ti(Fe Co) and fcc Ti-2(Co Fe) the morphology and distribution of the eutectic structure transforms from limited length and minor quantity to partial fine alternating bcc beta-Ti and bcc Ti(Fe Co) lamellae and further to typical complete ultrafine alternating continuous lamellae in the SSSed ternary Ti-Fe-Co quaternary Ti-Fe-Co-Nb and quinary Ti-Fe-Co-Nb-Al alloys. Interestingly the SSSed Ti-Fe-Co-Nb-Al alloy presents a novel bimodal microstructure of coarse fcc Ti-2(Co Fe) surrounded by an ultrafine lamellar eutectic matrix containing ultrafine bcc beta-Ti and bcc Ti(Fe Co) lamellae. This bimodal microstructure exhibits ultra-high yield strength of 2050 MPa with plasticity in compression of 19.7% which exceed published values of equivalent materials. Our results provide a novel pathway for fabricating new-structure metallic alloys for high-performance structural applications. (C) 2017 Elsevier B.V. All rights reserved.</p

Impact of the Kuroshio intrusion on the nutrient inventory in the upper northern South China Sea: insights from an isopycnal mixing model

Based on four cruises covering a seasonal cycle in 2009-2011, we examined the impact of the Kuroshio intrusion, featured by extremely oligotrophic waters, on the nutrient inventory in the central northern South China Sea (NSCS). The nutrient inventory in the upper 100m of the water column in the study area ranged from similar to 200 to similar to 290 mmol m(-2) for N+N (nitrate plus nitrite), from similar to 13 to similar to 24 mmol m(-2) for soluble reactive phosphate and from similar to 210 to similar to 430 mmol m(-2) for silicic acid. The nutrient inventory showed a clear seasonal pattern with the highest value appearing in summer, while the N+N inventory in spring and winter had a reduction of similar to 13 and similar to 30 %, respectively, relative to that in summer. To quantify the extent of the Kuroshio intrusion, an isopycnal mixing model was adopted to derive the proportional contribution of water masses from the SCS proper and the Kuroshio along individual isopycnal surfaces. The derived mixing ratio along the isopycnal plane was then employed to predict the genuine gradients of nutrients under the assumption of no biogeochemical alteration. These predicted nutrient concentrations, denoted as N-m, are solely determined by water mass mixing. Results showed that the nutrient inventory in the upper 100m of the NSCS was overall negatively correlated to the Kuroshio water fraction, suggesting that the Kuroshio intrusion significantly influenced the nutrient distribution in the SCS and its seasonal variation. The difference between the observed nutrient concentrations and their corresponding Nm allowed us to further quantify the nutrient removal/addition associated with the biogeochemical processes on top of the water mass mixing. We revealed that the nutrients in the upper 100m of the water column had a net consumption in both winter and spring but a net addition in fall.Based on four cruises covering a seasonal cycle in 2009-2011, we examined the impact of the Kuroshio intrusion, featured by extremely oligotrophic waters, on the nutrient inventory in the central northern South China Sea (NSCS). The nutrient inventory in the upper 100m of the water column in the study area ranged from similar to 200 to similar to 290 mmol m(-2) for N+N (nitrate plus nitrite), from similar to 13 to similar to 24 mmol m(-2) for soluble reactive phosphate and from similar to 210 to similar to 430 mmol m(-2) for silicic acid. The nutrient inventory showed a clear seasonal pattern with the highest value appearing in summer, while the N+N inventory in spring and winter had a reduction of similar to 13 and similar to 30 %, respectively, relative to that in summer. To quantify the extent of the Kuroshio intrusion, an isopycnal mixing model was adopted to derive the proportional contribution of water masses from the SCS proper and the Kuroshio along individual isopycnal surfaces. The derived mixing ratio along the isopycnal plane was then employed to predict the genuine gradients of nutrients under the assumption of no biogeochemical alteration. These predicted nutrient concentrations, denoted as N-m, are solely determined by water mass mixing. Results showed that the nutrient inventory in the upper 100m of the NSCS was overall negatively correlated to the Kuroshio water fraction, suggesting that the Kuroshio intrusion significantly influenced the nutrient distribution in the SCS and its seasonal variation. The difference between the observed nutrient concentrations and their corresponding Nm allowed us to further quantify the nutrient removal/addition associated with the biogeochemical processes on top of the water mass mixing. We revealed that the nutrients in the upper 100m of the water column had a net consumption in both winter and spring but a net addition in fall

Fracture behaviors under pure shear loading in bulk metallic glasses

Pure shear fracture test, as a special mechanical means, had been carried out extensively to obtain the critical information for traditional metallic crystalline materials and rocks, such as the intrinsic deformation behavior and fracture mechanism. However, for bulk metallic glasses (BMGs), the pure shear fracture behaviors have not been investigated systematically due to the lack of a suitable test method. Here, we specially introduce a unique antisymmetrical four-point bend shear test method to realize a uniform pure shear stress field and study the pure shear fracture behaviors of two kinds of BMGs, Zr-based and La-based BMGs. All kinds of fracture behaviors, the pure shear fracture strength, fracture angle and fracture surface morphology, are systematically analyzed and compared with those of the conventional compressive and tensile fracture. Our results indicate that both the Zrbased and La-based BMGs follow the same fracture mechanism under pure shear loading, which is significantly different from the situation of some previous research results. Our results might offer new enlightenment on the intrinsic deformation and fracture mechanism of BMGs and other amorphous materials

Effects of cultivation years on effective constituent content of Fritillaria pallidiflora Schernk

Fritillaria pallidiflora Schrenk has been treasured in traditional classic medicine as an antitussive, antiasthmatic and expectorant for hundreds of years. With gradually decreasing wild F. pallidiflora resources, the herb can no longer satisfy the demand. Artificial cultivation is one of the most effective ways to solve the contradiction between supply and demand in the medicinal material market. During the growth of Rhizomes medicinal plants, root biomass and active ingredient content showed dynamic accumulated variation with increasing cultivation years. Up to now, hardly any attempts have been made to investigate the relationship between quality and cultivation years of F. pallidiflora. Therefore, in this paper, we determined the optimum harvesting time by comparing biomass and biological characteristics of F. pallidiflora at different cultivation times. High-performance liquid chromatography with evaporative light scattering detection and phenol-sulfuric acid visible spectrophotometry was performed to determine imperialine and polysaccharide content of F. pallidiflora bulbs. From year 1 to 6 of cultivation, we observed an upward trend in plant height, diameter and dry weight of F. pallidiflora, while water content decreased. Plant height and dry weight increased remarkably during the fourth year of cultivation. The content of imperialine and polysaccharide of F. pallidiflora bulbs, on the other hand, showed an upward trend from year 1 to 3, after which it decreased from year 3 to 6. By comparing plant growth, biomass development and the accumulation of imperialine and polysaccharide, the best harvesting time of F. pallidiflora was determined to be after 4 years of cultivation. Our results showed that it is possible to establish a safe, effective, stable and controllable production process, which could play an important role in achieving sustainable utilization of F. pallidiflora resources.Fritillaria pallidiflora Schrenk has been treasured in traditional classic medicine as an antitussive, antiasthmatic and expectorant for hundreds of years. With gradually decreasing wild F. pallidiflora resources, the herb can no longer satisfy the demand. Artificial cultivation is one of the most effective ways to solve the contradiction between supply and demand in the medicinal material market. During the growth of Rhizomes medicinal plants, root biomass and active ingredient content showed dynamic accumulated variation with increasing cultivation years. Up to now, hardly any attempts have been made to investigate the relationship between quality and cultivation years of F. pallidiflora. Therefore, in this paper, we determined the optimum harvesting time by comparing biomass and biological characteristics of F. pallidiflora at different cultivation times. High-performance liquid chromatography with evaporative light scattering detection and phenol-sulfuric acid visible spectrophotometry was performed to determine imperialine and polysaccharide content of F. pallidiflora bulbs. From year 1 to 6 of cultivation, we observed an upward trend in plant height, diameter and dry weight of F. pallidiflora, while water content decreased. Plant height and dry weight increased remarkably during the fourth year of cultivation. The content of imperialine and polysaccharide of F. pallidiflora bulbs, on the other hand, showed an upward trend from year 1 to 3, after which it decreased from year 3 to 6. By comparing plant growth, biomass development and the accumulation of imperialine and polysaccharide, the best harvesting time of F. pallidiflora was determined to be after 4 years of cultivation. Our results showed that it is possible to establish a safe, effective, stable and controllable production process, which could play an important role in achieving sustainable utilization of F. pallidiflora resources

c-axis preferential orientation of hydroxyapatite accounts for the high wear resistance of the teeth of black carp (Mylopharyngodon piceus)

Biological armors such as mollusk shells have long been recognized and studied for their values in inspiring novel designs of engineering materials with higher toughness and strength. However, no material is invincible and biological armors also have their rivals. In this paper, our attention is focused on the teeth of black carp (Mylopharyngodon piceus) which is a predator of shelled mollusks like snails and mussels. Nanoscratching test on the enameloid, the outermost layer of the teeth, indicates that the natural occlusal surface (OS) has much higher wear resistance compared to the other sections. Subsequent X-ray diffraction analysis reveals that the hydroxyapatite (HAp) crystallites in the vicinity of OS possess c-axis preferential orientation. The superior wear resistance of black carp teeth is attributed to the c-axis preferential orientation of HAp near the OS since the (001) surface of HAp crystal, which is perpendicular to the c-axis, exhibits much better wear resistance compared to the other surfaces as demonstrated by the molecular dynamics simulation. Our results not only shed light on the origin of the good wear resistance exhibited by the black carp teeth but are of great value to the design of engineering materials with better abrasion resistance