A novel expression cassette for the efficient visual selection of transformed tissues in florists' chrysanthemum (Chrysanthemum morifolium Ramat.).

Constructs carrying visual reporter genes coupled with efficient promoters could facilitate the process of identification and selection of stable transformants in recalcitrant crops. Here, a novel construct utilizing a ribulose-1,5-bisphosphate carboxylase (RbcS) promoter combined with the green fluorescent protein (GFP) reporter gene to initiate very high expression of GFP in florist's chrysanthemum (Chrysanthemum morifolium Ramat.) was described. Based on this expression cassette, a new regeneration protocol using leaf discs as explants was developed for the Agrobacterium-mediated transformation of Chrysanthemum genotype ‘1581’, and a transformation efficiency of 7% was obtained. The expression of two different GFP constructs targeted to either cytosol or plastids was compared in transgenic lines. Both GFP constructs were expressed at such a high level that the green fluorescence dominated red fluorescence in the leaf tissues, allowing easy observation and microdissection of transformed tissues even without a GFP filter. Under normal light, plants with GFP targeted to plastids had a light green phenotype deriving from the high GFP expression. Quantitative reverse transcriptional PCR analysis showed that the plastid targeted construct with intron had significantly higher steady state transcript levels of GFP mRNA. This novel expression cassette may allow direct visual selection of transformed tissues independent of antibiotic selection in a wide range of plant specie

Semiparametric Approaches for Joint modeling of Longitudinal and Survival Data with Time Varying Coefficients

We study joint modeling of survival and longitudinal data. There are two regression models of interest. The primary model is for survival outcomes, which are assumed to follow a time varying coefficient proportional hazards model. The second model is for longitudinal data, which are assumed to follow a random effects model. Based on the trajectory of a subject\u27s longitudinal data, some covariates in the survival model are functions of the unobserved random effects. Estimated random effects are generally different from the unobserved random effects and hence this leads to covariate measurement error. To deal with covariate measurement error, we propose a local corrected score estimator and a local conditional score estimator. Both approaches are semiparametric methods in the sense that there is no distributional assumption needed for the underlying true covariates. The estimators are shown to be consistent and asymptotically normal. Finite sample properties are assessed via simulation. The approaches are demonstrated by an application to data from an HIV clinical trial

Amorphous Al-transition Metal Alloys as Anode Material for Lithium Ion Battery

Al based alloy powders (Al₈₅Ni₅Y₆Co₂Fe₂) are produced by spray atomization method. High energy ball milling is done to modify the surface topology and particle size for better electrochemical performance. X ray diffraction (XRD), differential scanning calorimeter (DSC), scanning electron microscope (SEM) and transmission electron microscope (TEM) were conducted to characterize the microstructure of the alloys after ball milling. It is found that 5 hours ball milling gives the minimum crystallization and structure change. Thin film sample is also deposited on stainless steel substrate by pulsed laser deposition (PLD) method for electrochemical test. The capacity and reversibility for different samples are compared and discussed. A capacity of 200mAh/g is obtained for the battery with thin film sample as anode and a capacity of 140mAh/g is obtained for that with electrode from powder sample. Both of the batteries give up to 94% capacity retention after 20 cycles.Singapore-MIT Alliance (SMA

ENVIRONMENTAL SURROUNDINGS AND PERSONAL WELL-BEING IN URBAN CHINA

We examine the relationship between atmospheric pollution, water pollution, traffic congestion, access to parkland and personal well-being using a survey administered across six Chinese cities in 2007. In contrast to existing studies of the determinants of well-being by economists, which have typically employed single item indicators to measure well-being, we use the Personal Well-Being Index (PWI). We also employ the Job Satisfaction Survey (JSS) to measure job satisfaction, which is one of the variables for which we control when examining the relationship between environmental surroundings and personal well-being. Previous research by psychologists has shown the PWI and JSS to have good psychometric properties in western and Chinese samples. A robust finding is that in cities with higher levels of atmospheric pollution and traffic congestion, respondents report lower levels of personal well-being ceteris paribus. We find that a one standard deviation increase in suspended particles or sulphur dioxide emissions is roughly equivalent to a 12-13 percent reduction in average monthly income in the six cities. This result suggests that the personal well-being of China's urban population can be enhanced if China were to pursue a more balanced growth path which curtailed atmospheric pollution.China, Environment, Pollution, Personal Well-Being.

Medicated Janus fibers fabricated using a Teflon-coated side-by-side spinneret

A family of medicated Janus fibers that provides highly tunable biphasic drug release was fabricated using a side-by-side electrospinning process employing a Teflon-coated parallel spinneret. The coated spinneret facilitated the formation of a Janus Taylor cone and in turn high quality integrated Janus structures, which could not be reliably obtained without the Teflon coating. The fibers prepared had one side consisting of polyvinylpyrrolidone (PVP) K60 and ketoprofen, and the other of ethyl cellulose (EC) and ketoprofen. To modulate and tune drug release, PVP K10 was doped into the EC side in some cases. The fibers were linear and had flat morphologies with an indent in the center. They provide biphasic drug release, with the PVP K60 side dissolving very rapidly to deliver a loading dose of the active ingredient, and the EC side resulting in sustained release of the remaining ketoprofen. The addition of PVP K10 to the EC side was able to accelerate the second stage of release; variation in the dopant amount permitted the release rate and extent this phase to be precisely tuned. These results offer the potential to rationally design systems with highly controllable drug release profiles, which can complement natural biological rhythms and deliver maximum therapeutic effects

Global Incidence and mortality of oesophageal cancer and their correlation with socioeconomic indicators temporal patterns and trends in 41 countries

Oesophageal cancers (adenocarcinomas [AC] and squamous cell carcinomas [SCC]) are characterized by high incidence/mortality in many countries. We aimed to delineate its global incidence and mortality, and studied whether socioeconomic development and its incidence rate were correlated. The age-standardized rates (ASRs) of incidence and mortality of this medical condition in 2012 for 184 nations from the GLOBOCAN database; national databases capturing incidence rates, and the WHO mortality database were examined. Their correlations with two indicators of socioeconomic development were evaluated. Joinpoint regression analysis was used to generate trends. The ratio between the ASR of AC and SCC was strongly correlated with HDI (r = 0.535 [men]; r = 0.661 [women]) and GDP (r = 0.594 [men]; r = 0.550 [women], both p < 0.001). Countries that reported the largest reduction in incidence in male included Poland (Average Annual Percent Change [AAPC] = −7.1, 95%C.I. = −12,−1.9) and Singapore (AAPC = −5.8, 95%C.I. = −9.5,−1.9), whereas for women the greatest decline was seen in Singapore (AAPC = −12.3, 95%C.I. = −17.3,−6.9) and China (AAPC = −5.6, 95%C.I. = −7.6,−3.4). The Philippines (AAPC = 4.3, 95%C.I. = 2,6.6) and Bulgaria (AAPC = 2.8, 95%C.I. = 0.5,5.1) had a significant mortality increase in men; whilst Columbia (AAPC = −6.1, 95%C.I. = −7.5,−4.6) and Slovenia (AAPC = −4.6, 95%C.I. = −7.9,−1.3) reported mortality decline in women. These findings inform individuals at increased risk for primary prevention

Studies of Prototype CsI(Tl) Crystal Scintillators for Low-Energy Neutrino Experiments

Crystal scintillators provide potential merits for the pursuit of low-energy low-background experiments. A CsI(Tl) scintillating crystal detector is being constructed to study low-energy neutrino physics at a nuclear reactor, while projects are underway to adopt this technique for dark matter searches. The choice of the geometrical parameters of the crystal modules, as well as the optimization of the read-out scheme, are the results of an R&D program. Crystals with 40 cm in length were developed. The detector requirements and the achieved performance of the prototypes are presented. Future prospects for this technique are discussed.Comment: 32 pages, 14 figure

Projections of air pollutant emissions and its impacts on regional air quality in China in 2020

Anthropogenic emissions of air pollutants in China influence not only local and regional environments but also the global atmospheric environment; therefore, it is important to understand how China's air pollutant emissions will change and how they will affect regional air quality in the future. Emission scenarios in 2020 were projected using forecasts of energy consumption and emission control strategies based on emissions in 2005, and on recent development plans for key industries in China. We developed four emission scenarios: REF[0] (current control legislations and implementation status), PC[0] (improvement of energy efficiencies and current environmental legislation), PC[1] (improvement of energy efficiencies and better implementation of environmental legislation), and PC[2] (improvement of energy efficiencies and strict environmental legislation). Under the REF[0] scenario, the emission of SO2, NOx, VOC and NH3 will increase by 17%, 50%, 49% and 18% in 2020, while PM10 emissions will be reduced by 10% over East China, compared to that in 2005. In PC[2], sustainable energy polices will reduce SO2, NOx and PM10 emissions by 4.1 Tg, 2.6 Tg and 1.8 Tg, respectively; better implementation of current control policies will reduce SO2, NOx and PM10 emission by 2.9 Tg, 1.8 Tg, and 1.4 Tg, respectively; strict emission standards will reduce SO2, NOx and PM10 emissions by 3.2 Tg, 3.9 Tg, and 1.7 Tg, respectively. Under the PC[2] scenario, SO2 and PM10 emissions will decrease by 18% and 38%, while NOx and VOC emissions will increase by 3% and 8%, compared to that in 2005. Future air quality in China was simulated using the Community Multi-scale Air Quality Model (CMAQ). Under RE[0] emissions, compared to 2005, the surface concentrations of SO2, NO2, hourly maximum ozone in summer, PM2.5, total sulfur and nitrogen depositions will increase by 28%, 41%, 8%, 8%, 19% and 25%, respectively, over east China. Under the PC[2] emission scenario, the surface concentrations of SO2, M2.5, total sulfur depositions will decrease by 18%, 16% and 15%, respectively, and the surface concentrations of NO2, nitrate, hourly maximum ozone in summer, total nitrogen depositions will be kept as 2005 level, over east China. The individual impacts of SO2, NOx, NH3, NMVOC and primary PM emission changes on ozone and PM.5 concentrations have been analyzed using sensitivity analysis. The results suggest that NOx emission control need to be enhanced during the summertime to obtain both ozone and PM2.5 reduction benefits. NH3 emission controls should also be considered in order to reduce both nitrate concentration and total nitrogen deposition in the future