Successful Factor Market Competition Pre-Privatisation? China`s eclectic.com

Can factor market competition, given pertinent incentives, bring about efficiency gains, or is privatisation necessary? We assess the impact of factor market competition on Chinese state-owned enterprises' productivity in a laboratory-like setting. The empirical evidence suggests that substantial efficiency gains are achievable pre-privatisation. Methodologically, we adapt an algorithm developed by Olley and Pakes (1996) which deals with simultaneity and selection bias in production function estimation. This is required since the reform process that introduced factor market competition involved endogenous group selection. While macro-level timing was important, enterprise characteristics, chiefly capital intensity and productivity, played an important role in the sequencing of reforms. Further, reform-induced competitive pressures brought about significant efficiency gains prior to privatisation. Finally, not controlling for selection bias would have resulted in an overestimation of reform-related productivity gains by up to fifty percent.

A randomised clinical trial comparing outcomes of a single digit volar plate injury : buddy loops versus dorsal thermoplastic orthosis in a neutral position : study protocol

Background Volar plate injuries are a common hand injury and complications associated with this injury such as a fixed flexion deformity, persistent pain and oedema can have a significant impact on a person’s function. The literature reports these injuries are treated using various splinting materials such as thermoplastic, in varying degrees of proximal interphalangeal joint flexion or buddy loops. Despite volar plate injuries being reported as common, optimal non-surgical treatment of these injuries remains unclear. This study aims to investigate whether a dorsal blocking orthosis in a neutral position (00) is more effective than buddy loops for a volar plate injury to the proximal interphalangeal joint in preventing a fixed flexion deformity, reducing pain, managing oedema, and promoting function. Methods This study is a single-centre, prospective parallel-group, single blinded (assessor), randomised clinical trial. Patients between 18–65 years, who have sustained a volar plate injury to a single digit, have adequate cognitive functioning and give written informed consent will be invited to participate in this study. Patients will be randomised to either the control group where they will be fitted with buddy loops and commence early active motion exercises or the experimental group where they will receive a dorsal thermoplastic orthosis in a neutral position and commence early active motion exercises. The primary outcome measure is passive proximal interphalangeal joint extension and secondary outcome measures include passive range of motion, total passive motion, active range of motion, total active motion, grip strength, oedema, pain, function and adherence to treatment. Assessments will be completed until 8 weeks following commencement of treatment. The sample size calculation indicates that 23 patients is required in each group. With an expected dropout rate of 25% a total of 32 patients will be enrolled in each group. Discussion This study will assist in trying to improve treatment of volar plate injuries and assist in reducing complications associated with volar plate injuries, potentially reducing the need for prolonged hand therapy. Trial registration This trial has been registered with the Australian New Zealand Clinical Trials Registry (ACTRN12622001425785p). Ethical approval has been granted by the South Eastern Sydney Local Health District ethical committee (2022/ETH01697)

Design principles for maximizing photovoltage in metal-oxide-protected water-splitting photoanodes

Metal oxide protection layers for photoanodes may enable the development of large-scale solar fuel and solar chemical synthesis, but the poor photovoltages often reported so far will severely limit their performance. Here we report a novel observation of photovoltage loss associated with a charge extraction barrier imposed by the protection layer, and, by eliminating it, achieve photovoltages as high as 630mV, the maximum reported so far for water-splitting silicon photoanodes. The loss mechanism is systematically probed in metal-insulator-semiconductor Schottky junction cells compared to buried junction p(+) n cells, revealing the need to maintain a characteristic hole density at the semiconductor/insulator interface. A leaky-capacitor model related to the dielectric properties of the protective oxide explains this loss, achieving excellent agreement with the data. From these findings, we formulate design principles for simultaneous optimization of built-in field, interface quality, and hole extraction to maximize the photovoltage of oxide-protected water-splitting anodes

Beef production from feedstuffs conserved using new technologies to reduce negative environmental impacts

End of project reportMost (ca. 86%) Irish farms make some silage. Besides directly providing feed for livestock, the provision of grass silage within integrated grassland systems makes an important positive contribution to effective grazing management and improved forage utilisation by grazing animals, and to effective feed budgeting by farmers. It can also contribute to maintaining the content of desirable species in pastures, and to livestock not succumbing to parasites at sensitive times of the year. Furthermore, the optimal recycling of nutrients collected from housed livestock can often be best achieved by spreading the manures on the land used for producing the conserved feed. On most Irish farms, grass silage will remain the main conserved forage for feeding to livestock during winter for the foreseeable future. However, on some farms high yields of whole-crop (i.e. grain + straw) cereals such as wheat, barley and triticale, and of forage maize, will be an alternative option provided that losses during harvesting, storage and feedout are minimised and that input costs are restrained. These alternative forages have the potential to reliably support high levels of animal performance while avoiding the production of effluent. Their production and use however will need to advantageously integrate into ruminant production systems. A range of technologies can be employed for crop production and conservation, and for beef production, and the optimal options need to be identified. Beef cattle being finished indoors are offered concentrate feedstuffs at rates that range from modest inputs through to ad libitum access. Such concentrates frequently contain high levels of cereals such as barley or wheat. These cereals are generally between 14% to 18% moisture content and tend to be rolled shortly before being included in coarse rations or are more finely processed prior to pelleting. Farmers thinking of using ‘high-moisture grain’ techniques for preserving and processing cereal grains destined for feeding to beef cattle need to know how the yield, conservation efficiency and feeding value of such grains compares with grains conserved using more conventional techniques. European Union policy strongly encourages a sustainable and multifunctional agriculture. Therefore, in addition to providing European consumers with quality food produced within approved systems, agriculture must also contribute positively to the conservation of natural resources and the upkeep of the rural landscape. Plastics are widely used in agriculture and their post-use fate on farms must not harm the environment - they must be managed to support the enduring sustainability of farming systems. There is an absence of information on the efficacy of some new options for covering and sealing silage with plastic sheeting and tyres, and an absence of an inventory of the use, re-use and post-use fate of plastic film on farms. Irish cattle farmers operate a large number of beef production systems, half of which use dairy bred calves. In the current, continuously changing production and market conditions, new beef systems must be considered. A computer package is required that will allow the rapid, repeatable simulation and assessment of alternate beef production systems using appropriate, standardised procedures. There is thus a need to construct, evaluate and utilise computer models of components of beef production systems and to develop mathematical relationships to link system components into a network that would support their integration into an optimal system model. This will provide a framework to integrate physical and financial on-farm conditions with models for estimating feed supply and animal growth patterns. Cash flow and profit/loss results will be developed. This will help identify optimal systems, indicate the cause of failure of imperfect systems and identify areas where applied research data are currently lacking, or more basic research is required

Homozygosity at the MTL locus in clinical strains of Candida albicans: Karyotypic rearrangments and tetraploid formation

One hundred and twenty Candida albicans clinical isolates from the late 1980s and early 1990s were examined for homosygosity at the MTL locus. Of these, 108 were heterozygous (MTLa/MTLα), whereas seven were MTLa and five were MTLα. Five of the homozygous isolates were able to switch to the opaque cell morphology, while opaque cells were not detectable among the remaining seven. Nevertheless, all but one of the isolates homozygous at the MTL locus were shown to mate and to yield cells containing markers from both parents; the non-mater was found to have a frameshift in the MTLα1 gene. In contrast to Saccharomyces cerevisiae, C. albicans homozygotes with no active MTL allele failed to mate rather than mating as a cells. There was no correlation between homoxygosity and fluconazole resistance, mating and fluconazole resistance or switching and fluconazole resistance, in part because most of the strains were isolated before the widespread use of this antifungal agent, and only three were in fact drug resistant Ten of the 12 homozygotes had rearranged karyotypes involving one or more homologue of chromosomes 4, 5, 6 and 7. We suggest that karyotypic rearrangement, drug resistance and homozygosity come about as the result of induction of hyperrecombination during the infection process; hence, they tend to occur together, but each is the independent result of the same event. Furthermore, as clinical strains can mate and form tetraploids, mating and marker exchange are likely to be a significant part of the life cycle of C. albicans in vivo

A combined capacitance-voltage and hard x-ray photoelectron spectroscopy characterisation of metal/Al2O3/In0.53Ga0.47As capacitor structures

Capacitance-Voltage (C-V) characterization and hard x-ray photoelectron spectroscopy (HAXPES) measurements have been used to study metal/Al2O3/In0.53Ga0.47As capacitor structures with high (Ni) and low (Al) work function metals. The HAXPES measurements observe a band bending occurring prior to metal deposition, which is attributed to a combination of fixed oxide charges and interface states of donor-type. Following metal deposition, the Fermi level positions at the Al2O3/In0.53Ga0.47As interface move towards the expected direction as observed from HAXPES measurements. The In0.53Ga0.47As surface Fermi level positions determined from both the C-V analysis at zero gate bias and HAXPES measurements are in reasonable agreement. The results are consistent with the presence of electrically active interface states at the Al2O3/In0.53Ga0.47As interface and suggest an interface state density increasing towards the In0.53Ga0.47As valence band edge. (C) 2014 AIP Publishing LLC

The Northwest Tropical Atlantic Station (NTAS) : NTAS-4 mooring turnaround cruise report

The Northwest Tropical Atlantic Station (NTAS) was established to address the need for accurate air-sea flux estimates and upper ocean measurements in a region with strong sea surface temperature anomalies and the likelihood of significant local air–sea interaction on interannual to decadal timescales. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 15°N, 51°W by successive mooring turnarounds. These observations will be used to investigate air–sea interaction processes related to climate variability. Deployment of the first (NTAS-1), second (NTAS-2) and third (NTAS-3) moorings were documented in previous reports (Plueddemann et al., 2001; 2002; 2003). This report documents recovery of the NTAS-3 mooring and deployment of the NTAS-4 mooring at the same site. Both moorings used 3-meter discus buoys as the surface element. These buoys were outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 150 m of the mooring line were outfitted with oceanographic sensors for the measurement of temperature and velocity. The mooring turnaround was done on the NOAA ship Ronald H. Brown, Cruise RB-04-01, by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution. The cruise took place between 12 and 25 February 2004. The NTAS-3 buoy was found adrift and recovered on 19 February at 14°53.7’N, 51°22.8’W. Deployment of the NTAS-4 mooring was on 21 February at approximately 14°44.4’N, 50°56.0’W in 5038 m of water. A 30-hour intercomparison period followed, after which dragging operations to recover the lower portion of the NTAS-3 mooring commenced. This report describes these operations, as well as other work done on the cruise and some of the pre-cruise buoy preparations.Funding was provided by the National Oceanic and Atmospheric Administration under Grant No. NA17RJ1223 and the Cooperative Institute for Climate and Ocean Research (CICOR)