Traditional Biocidal Replacement Viability of Microcrystalline Silver Chloride

The antimicrobial effects of silver ions and silver chloride nanoparticles have been well established while the efficacy of microcrystalline silver chloride has been less studied. Certex-AM, a microcrystalline silver chloride product produced by Cerion, Rochester, NY, was tested for its antimicrobial properties as a possible replacement for traditional biocidal techniques used in water cooling towers. The minimum inhibitory concentration (MIC) of the compound was determined using a microtiter broth assay. The compound was found to have inhibitory effects on bacterial growth for all tested organisms at concentrations greater than 9 ppm. Additional testing simulating a water cooling system showed the effectiveness of reducing an established wild population at concentrations of 10 ppm of the microcrystalline silver chloride. Certex-AM was found to be a promising replacement for traditional biocides as well as for other applications. Introduction of effective antimicrobial compounds such as this could reduce the pathogenic risk to humans associated with water cooling towers

Growth of boundary-layer streaks due to free-stream turbulence

The growth of laminar boundary-layer streaks caused by free-stream turbulence encountering a flat plate in zero-pressure-gradient conditions is investigated experimentally in a wind tunnel and numerically by solving the unsteady boundary-region equations. A comparative discussion amongst the most relevant theoretical frameworks, such as the Goldstein theory, the Taylor-Stewartson theory, the optimalgrowth theory and the Orr-Sommerfeld theory, is first presented and parallels and complimentary aspects of the theories are pointed out to justify the use of the Goldstein theory in our study. The statistical properties of the positive and negative fluctuations of the laminar streaks are discussed, showing how the total time average of the boundary-layer fluctuations masks the true character of the disturbance flow and revealing that the maximum values and the root-mean-square of positive and negative fluctuations grow downstream at the same rate. The downstream growth rate of the low-frequency disturbances and the decay rate of the high-frequency disturbances are also computed for the first time. The numerical solutions of the unsteady boundary-region equations are compared successfully with the streak profiles measured in the wind tunnel and with direct numerical simulation results available in the literatur

The Feeding Value of Conserved Whole-Crop Wheat and Forage Maize Relative to Grass Silage and \u3ci\u3eAd-Libitum\u3c/i\u3e Concentrates for Beef Cattle

Grass is the predominant forage ensiled in Ireland. However, the relatively modest yields achieved in a single harvest allied to variability in digestibility and ensilability (and thus in intake and animal performance response) and the likelihood of effluent production create disadvantages for grass silage compared to the potential of some alternative forage crops. Thus, alternative forages are worthy of consideration on many farms. The objectives of this study were to quantify the relative intake, digestibility and performance of beef cattle offered grass silage, forage maize silage and whole-crop wheat (fermented or urea-treated), rank these relative to cattle offered an ad libitum concentrate-based diet and compare the “alkalage” system of urea-treated processed whole-crop wheat with whole-crop wheat silage

Measurement of disruption forces in JET using fiber-optic sensors

Monitoring the forces induced on the vacuum vessel when a disruption occurs is essential for the protection of the machine. Since divertor coils have been installed in JET, during disruptions a significant difference between the forces measured on the top and the bottom of the machine has been observed. In order to investigate these further, optical fiber transducers FBGs (Fiber Bragg Gratings) were installed in addition to the currently used strain gauges. During VDE (Vertical Displacement Event) tests, these new transducers were used to measure different level of disruptions ranging from 80T up to 230T vertical forces. The results were then compared with the strain gauges. The FBG measurement was carried out using a broadband light source illuminating an array of 4 FBGs through a combination of directional couplers, connectors and fiber-optic cable. The forces measured both by FBG and by the strain gauges are within the same range, except for the initial swing where large random differences are observed. The tests have demonstrated that the FBG-based force measurement system has adequate resolution (±1.52strain corresponding to a force of 4kN due to the geometry of the leg) and measurement range (50002strain or 13000kN) for this application

Shifting Patterns of Nitrogen Excretion and Amino Acid Catabolism Capacity during the Life Cycle of the Sea Lamprey (\u3cem\u3ePetromyzon mariunus\u3c/em\u3e)

The jawless fish, the sea lamprey (Petromyzon marinus), spends part of its life as a burrow-dwelling, suspension-feeding larva (ammocoete) before undergoing a metamorphosis into a free swimming, parasitic juvenile that feeds on the blood of fishes. We predicted that animals in this juvenile, parasitic stage have a great capacity for catabolizing amino acids when large quantities of protein-rich blood are ingested. The sixfold to 20-fold greater ammonia excretion rates (JAmm) in postmetamorphic (nonfeeding) and parasitic lampreys compared with ammocoetes suggested that basal rates of amino acid catabolism increased following metamorphosis. This was likely due to a greater basal amino acid catabolizing capacity in which there was a sixfold higher hepatic glutamate dehydrogenase (GDH) activity in parasitic lampreys compared with ammocoetes. Immunoblotting also revealed that GDH quantity was 10-fold and threefold greater in parasitic lampreys than in ammocoetes and upstream migrant lampreys, respectively. Higher hepatic alanine and aspartate aminotransferase activities in the parasitic lampreys also suggested an enhanced amino acid catabolizing capacity in this life stage. In contrast to parasitic lampreys, the twofold larger free amino acid pool in the muscle of upstream migrant lampreys confirmed that this period of natural starvation is accompanied by a prominent proteolysis. Carbamoyl phosphate synthetase III was detected at low levels in the liver of parasitic and upstream migrant lampreys, but there was no evidence of extrahepatic (muscle, intestine) urea production via the ornithine urea cycle. However, detection of arginase activity and high concentrations of arginine in the liver at all life stages examined infers that arginine hydrolysis is an important source of urea. We conclude that metamorphosis is accompanied by a metabolic reorganization that increases the capacity of parasitic sea lampreys to catabolize intermittently large amino acid loads arising from the ingestion of protein rich blood from their prey/hosts. The subsequent generation of energy-rich carbon skeletons can then be oxidized or retained for glycogen and fatty acid synthesis, which are essential fuels for the upstream migratory and spawning phases of the sea lamprey’s life cycle

Are We Training Our Detectives? A Survey of Large Law Enforcement Agencies Regarding Investigation Training and Training Needs

In this study, a mail survey was conducted of 146 of the largest local, sheriff, and state law enforcement agencies in the United States to assess the extent and type of investigation training they receive, and to identify needs. Twenty-nine agencies (20%) responded regarding extent and training for investigators that provided references for agency training programs. Many agencies reported similar courses, delivery systems, and needs. This indicated similar central investigation tasks across agency types, and suggested standardized training courses and delivery systems would likely fit their training needs. Two promising developments concerning online training were noted

Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity

Large-grain Nb has become a viable alternative to fine-grain Nb for the fabrication of superconducting radio-frequency cavities. In this contribution we report the results from a heat treatment study of a large-grain 1.5 GHz single-cell cavity made of "medium purity" Nb. The baseline surface preparation prior to heat treatment consisted of standard buffered chemical polishing. The heat treatment in the range 800 - 1400 C was done in a newly designed vacuum induction furnace. Q0 values of the order of 2x1010 at 2.0 K and peak surface magnetic field (Bp) of 90 mT were achieved reproducibly. A Q0-value of (5+-1)1010 at 2.0 K and Bp = 90 mT was obtained after heat treatment at 1400 C. This is the highest value ever reported at this temperature, frequency and field. Samples heat treated with the cavity at 1400 C were analyzed by secondary ion mass spectrometry, secondary electron microscopy, energy dispersive X-ray, point contact tunneling and X-ray diffraction and revealed a complex surface composition which includes titanium oxide, increased carbon and nitrogen content but reduced hydrogen concentration compared to a non heat-treated sample

3D Spectrophotometry of Planetary Nebulae in the Bulge of M31

We introduce crowded field integral field (3D) spectrophotometry as a useful technique for the study of resolved stellar populations in nearby galaxies. As a methodological test, we present a pilot study with selected extragalactic planetary nebulae (XPN) in the bulge of M31, demonstrating how 3D spectroscopy is able to improve the limited accuracy of background subtraction which one would normally obtain with classical slit spectroscopy. It is shown that due to the absence of slit effects, 3D is a most suitable technique for spectrophometry. We present spectra and line intensities for 5 XPN in M31, obtained with the MPFS instrument at the Russian 6m BTA, INTEGRAL at the WHT, and with PMAS at the Calar Alto 3.5m Telescope. Using 3D spectra of bright standard stars, we demonstrate that the PSF is sampled with high accuracy, providing a centroiding precision at the milli-arcsec level. Crowded field 3D spectrophotometry and the use of PSF fitting techniques is suggested as the method of choice for a number of similar observational problems, including luminous stars in nearby galaxies, supernovae, QSO host galaxies, gravitationally lensed QSOs, and others.Comment: (1) Astrophysikalisches Institut Potsdam, (2) University of Durham. 18 pages, 11 figures, accepted for publication in Ap