The effect of vibratory stress on the welding microstructure and residual stress distribution

Previous studies have suggested that weld microstructure may be modified by the presence of static stresses. In this investigation, vibratory stress was applied to mild steel specimens while they were being welded to observe its effect on the residual stress, microstructure and hardness of the material. Residual stresses were found to decrease in response to vibration whether it was applied during welding or after welding. It was found that the applied stress influenced the grain growth process in the weld. As a result of the treatment the hardness of the material was found to be increased by 25 per cent

Modelling self-piercing riveted joint failures in automotive crash structures

This paper describes a new model and method to predict Self-Piercing Riveted (SPR) joint interlock failures in aluminium sheet at crash speeds using explicit finite element simulation. SPR interlock failure is dependent on rivet direction, which is included in the model. A mesh independent approach is adopted for connection model which is capable of industrial application at the full vehicle crash analysis level. The paper provides an overview of the approach to validate connection model; typically by developing detailed physics based models of various joint configurations supported with high speed experimental data, through to model capable of industrial application. The framework to validate connection model for use in crash simulation tools is expected to have broader applicatio

Validating dynamic tensile mechanical properties of sheet steels for automotive crash applications

A thin-wall open channel beam, fabricated from high strength Dual Phase sheet steel, subjected to 3-point bending and constant velocity boundary condition, is investigated to validate material performance for automotive crash applications. Specifically quantitative validation of material tensile data determined from high speed tests and component models, and qualitative validation of materials resistance to fracture. The open channel beam is subjected to quasi-static and increasing loading speed and in all cases, large displacement in which deformation involves formation of a plastic hinge. This paper describes development of test procedure, notably beam specimen design, measurement system and boundary conditions, using both experimental and numerical techniques. The new test procedure, as a compliment to crush testing, will increase confidence in the modeling and application of new advanced higher strength materials in automotive crash structure

Stability of the Magnetic Monopole Condensate in three- and four-colour QCD

It is argued that the ground state of three- and four-colour QCD contains a monopole condensate, necessary for the dual Meissner effect to be the mechanism of confinement, and support its stability on the grounds that it gives the off-diagonal gluons an effective mass sufficient to remove the unstable ground state mode.Comment: jhep.cls, typos corrected, references added, some content delete

The influence of vibratory treatment on the fatigue life of welds : a comparison with thermal stress relief

A comparison has been made between the fatigue lives of welded specimens a) in the as welded condition b) after heat treatment, and c) after post-weld vibration. By comparison with the aswelded specimens, the fatigue lives of the thermally relieved specimens were found to decrease by 43%, while the vibration treated specimens showed an increase of between 17% and 30%. While these findings are interesting in that they offer a way of extending the fatigue lives of welded joints, they confirm the view that the mechanism of residual stress relieving in the vibratory stress relief (VSR) method, and its relationship with fatigue life is poorly understood

A method for evaluating the mechanical performance of thin-walled titanium tubes

A method which was developed to compare the stress-strain properties of three types of thin-walled, commercially pure titanium tubes is presented. The tubes were of types intended for use in large heat-exchanger applications and were to be subjected to significant plastic deformation during subsequent assembly processes. It had been anticipated that small differences in chemical composition and tube-drawing treatment would produce quite different characteristics. It is known that the properties of titanium can exhibit considerable degrees of anisotropy, especially for wrought products; although axial properties of the materials could be evaluated using standard test equipment and procedures, a novel testing system had to be designed to allow the circumferential properties to be assessed. Significant differences between tube types were observed and anisotropic material behaviour was apparent

Internuclear gene silencing in Phytophthora infestans is established through chromatin remodelling

In the plant pathogen Phytophthora infestans, nuclear integration of inf1 transgenic DNA sequences results in internuclear gene silencing of inf1. Although silencing is regulated at the transcriptional level, it also affects transcription from other nuclei within heterokaryotic cells of the mycelium. Here we report experiments exploring the mechanism of internuclear gene silencing in P. infestans. The DNA methylation inhibitor 5-azacytidine induced reversion of the inf1-silenced state. Also, the histone deacetylase inhibitor trichostatin-A was able to reverse inf1 silencing. inf1-expression levels returned to the silenced state when the inhibitors were removed except in non-transgenic inf1-silenced strains that were generated via internuclear gene silencing, where inf1 expression was restored permanently. Therefore, inf1-transgenic sequences are required to maintain the silenced state. Prolonged culture of non-transgenic inf1-silenced strains resulted in gradual reactivation of inf1 gene expression. Nuclease digestion of inf1-silenced and non-silenced nuclei showed that inf1 sequences in silenced nuclei were less rapidly degraded than non-silenced inf1 sequences. Bisulfite sequencing of the endogenous inf1 locus did not result in detection of any cytosine methylation. Our findings suggest that the inf1-silenced state is based on chromatin remodelling

Organic carbon partitioning during spring phytoplankton blooms in the Ross Sea polynya and the Sargasso Sea

In this study we evaluate the partitioning of organic carbon between the particulate and dissolved pools during spring phytoplankton blooms in the Ross Sea, Antarctica, and the Sargasso Sea. As part of a multidisciplinary project in the Ross Sea polynya we investigated the dynamics of the dissolved organic carbon (DOC) pool and the role it played in the carbon cycle during the 1994 spring phytoplankton bloom. Phytoplankton biomass during the bloom was dominated by an Antarctic Phaeocystis sp. We determined primary productivity (PP; via H14CO3, incubations), particulate organic carbon (POC), bacterial productivity (BP; via [3H]thymidine incorporation), and DOC during two occupations of 76°30′S from 175°W to 168°E. Results from this bloom are compared to blooms observed in the Sargasso Sea in the vicinity of the Bermuda Atlantic Time‐Series Study station (BATS). We present data that demonstrate clear differences in the production, biolability, and accumulation of DOC between the two ocean regions. Despite four‐ to fivefold greater PP in the Ross Sea, almost an order of magnitude less DOC (mmol m−2) accumulated during the Ross Sea bloom compared to the Sargasso Sea blooms. In the Ross Sea 89% (˜1 mol C m−2) of the total organic carbon (TOC) that accumulated during the bloom was partitioned as POC, with the remaining 11% (˜0.1 mol C m−2) partitioned as DOC. In contrast, a mean of 86% (0.7.5–1.0 mol m−2) of TOC accumulated as DOC during the 1992, 1993, and 1995 blooms in the Sargasso Sea, with as little as 14% (0.08–0.29 mol C m−2) accumulating as POC. Although a relatively small portion of the fixed carbon was produced as DOC in the Ross Sea, the bacterial carbon demand indicated that a qualitatively more labile carbon was produced in the Ross Sea compared to the Sargasso Sea. There are fundamental differences in organic carbon partitioning between the two systems that may be controlled by plankton community structure and food‐web dynamics

Electromagnetic proton form factors in large NcN_{c} QCD

The electromagnetic form factors of the proton are obtained using a particular realization of QCD in the large $N_c$ limit (${QCD}_{\infty}$), which sums up the infinite number of zero-width resonances to yield an Euler's Beta function (Dual-${QCD}_{\infty}$). The form factors $F_1(q^2)$ and $F_2(q^2)$, as well as $G_M(q^2)$ agree very well with reanalyzed space-like data in the whole range of momentum transfer. In addition, the predicted ratio $\mu_p G_E/G_M$ is in good agreement with recent polarization transfer measurements at Jefferson Lab.Comment: 10 page