Effect of vaccine storage temperatures and dose rate on antibody responses to foot and mouth disease vaccination in Cambodia

A field study investigated the effects of foot and mouth disease vaccine storage temperature for 7 days (frozen, refrigerated or held at ambient temperature) and dose (half or full dose) on the serological response to vaccination. It utilised a complete factorial design replicated on 18 smallholder cattle farms in three villages in Pursat province, Cambodia. Antibody responses from the 108 cattle involved were assessed by serological examination of blood samples collected at primary vaccination (day 0), at booster vaccination (day 30) and finally at 60 days post primary vaccination. Vaccination responses to the inactivated vaccine were assessed by testing for antibodies directed against FMD structural proteins in a liquid-phase blocking ELISA (LPBE test) and differentiated from responses to natural infection by examining antibody titres against non-structural viral proteins (NSPE test). LPBE results indicated that the mean log10 LPBE antibody titres of all experimental cattle increased from below protective levels at day 0 to protective levels at 30 days post primary vaccination, and increased further at 60 days post primary vaccination. Storage at ambient temperature for 1 week had no effect on antibody response to vaccination. However, freezing the vaccine for a week or use of a half dose resulted in significant reduction in titres at day 60 (P = 0.04 and P = 0.02, respectively). The results of this study reinforce the need to store FMD vaccines within the range recommended by the manufacturers and to adhere to the specified dosage instructions

A Melanin bleaching method to prevent non-specific immunostaining of chicken feathers

Melanin in pigmented organs like the skin is known to react with 3,3′-diaminobenzidine (DAB) to give a brown colour indistinguishable from the colour that DAB imparts to target antibodies bound to specific antigens. This can lead to false positives in chicken feathers during immunoperoxidase staining. Here, we present a simple, fast and practical method for bleaching chicken feathers which can be applied prior to immunohistochemistry staining without affecting specific antigen-antibody binding. To our knowledge, this is the first report of a melanin-bleaching technique prior to immunoperoxidase staining techniques of chicken feathers for detection of pathogens. Optimisations of the method include: • Removal of melanin from tissue sections using a short incubation with potassium permanganate followed by incubation with oxalic acid prior to immunostaining for improved specificity. • This technique did not affect the antigenicity of infectious laryngotracheitis virus antigen and did not cause damage or detachment of tissues from the slides

Modelling Marek's Disease Virus (MDV) infection: parameter estimates for mortality rate and infectiousness

Background: Marek's disease virus (MDV) is an economically important oncogenic herpesvirus of poultry. Since the 1960s, increasingly virulent strains have caused continued poultry industry production losses worldwide. To understand the mechanisms of this virulence evolution and to evaluate the epidemiological consequences of putative control strategies, it is imperative to understand how virulence is defined and how this correlates with host mortality and infectiousness during MDV infection. We present a mathematical approach to quantify key epidemiological parameters. Host lifespan, virus latent periods and host viral shedding rates were estimated for unvaccinated and vaccinated birds, infected with one of three MDV strains. The strains had previously been pathotyped to assign virulence scores according to pathogenicity of strains in hosts. Results: Our analyses show that strains of higher virulence have a higher viral shedding rate, and more rapidly kill hosts. Vaccination enhances host life expectancy but does not significantly reduce the shedding rate of the virus. While the primary latent period of the virus does not vary with challenge strain nor vaccine treatment of host, the time until the maximum viral shedding rate is increased with vaccination. Conclusions: Our approach provides the tools necessary for a formal analysis of the evolution of virulence in MDV, and potentially simpler and cheaper approaches to comparing the virulence of MDV strains

Microbial communities of poultry house dust, excreta and litter are partially representative of microbiota of chicken caecum and ileum

Traditional sampling methods for the study of poultry gut microbiota preclude longitudinal studies as they require euthanasia of birds for the collection of caecal and ileal contents. Some recent research has investigated alternative sampling methods to overcome this issue. The main goal of this study was to assess to what extent the microbial composition of non-invasive samples (excreta, litter and poultry dust) are representative of invasive samples (caecal and ileal contents). The microbiota of excreta, dust, litter, caecal and ileal contents (n = 110) was assessed using 16S ribosomal RNA gene amplicon sequencing. Of the operational taxonomic units (OTUs) detected in caecal contents, 99.7% were also detected in dust, 98.6% in litter and 100% in excreta. Of the OTUs detected in ileal contents, 99.8% were detected in dust, 99.3% in litter and 95.3% in excreta. Although the majority of the OTUs found in invasive samples were detected in non-invasive samples, the relative abundance of members of the microbial communities of these groups were different, as shown by beta diversity measures. Under the conditions of this study, correlation analysis showed that dust could be used as a proxy for ileal and caecal contents to detect the abundance of the phylum Firmicutes, and excreta as a proxy of caecal contents for the detection of Tenericutes. Similarly, litter could be used as a proxy for caecal contents to detect the abundance of Firmicutes and Tenericutes. However, none of the non-invasive samples could be used to infer the overall abundance of OTUs observed in invasive samples. In conclusion, non-invasive samples could be used to detect the presence and absence of the majority of the OTUs found in invasive samples, but could not accurately reflect the microbial community structure of invasive samples

Variability in practices for drinking water vaccination of meat chickens against infectious laryngotracheitis

Context: Drinking water vaccination of young meat chickens with Infectious Laryngotracheitis (ILT) vaccine is problematic. Vaccine failure and adverse vaccine reactions are frequently reported. Variations in the technique of applying ILT vaccines by this mass vaccination method need to be understood to contribute to improving the success of vaccination. Aims: This study aimed to examine variations in the techniques of application of Infectious Laryngotracheitis vaccines via drinking water for young meat chickens. Methods: Drinking water vaccination techniques were observed and recorded across 52 broiler flocks during ILT outbreaks in three geographic areas of Australia. Descriptive statistics for all variables were computed and variations between integrator company procedures were statistically compared. Key results: Despite rigorous standard operating procedures, wide variations were observed in time of water deprivation prior to vaccination (3–15 min), time drinking water was stabilised prior to addition of vaccine and the type of stabiliser product used, time to activate the flock following filling of the water lines with vaccine (10–127 min), time for the vaccine to be consumed (36–226 min) and the volume of drinking water per bird used to provide the vaccine (11–48 mL/bird). Conclusions: Variation in vaccination technique can affect the success of drinking water vaccination against ILT in young meat chickens. Implications: Understanding the importance of the variable factors in vaccine application method can improve the success of water vaccination against ILT

The effectiveness of mass vaccination on Marek's disease virus (MDV) outbreaks and detection within a broiler barn: A modeling study

AbstractMarek's disease virus (MDV), a poultry pathogen, has been increasing in virulence since the mid twentieth century. Since multiple vaccines have been developed and widely implemented, losses due to MDV have decreased. However, vaccine failure has occurred in the past and vaccine breakthroughs remain a problem. Failure of disease control with current vaccines would have significant economic and welfare consequences. Nevertheless, the epidemiology of the disease during a farm outbreak is not well understood. Here we present a mathematical model to predict the effectiveness of vaccines to reduce the outbreak probability and disease burden within a barn. We find that the chance of an outbreak within a barn increases with the virulence of an MDV strain, and is significantly reduced when the flock is vaccinated, especially when there the contaminant strain is of low virulence. With low quantities of contaminated dust, there is nearly a 100% effectiveness of vaccines to reduce MDV outbreaks. However, the vaccine effectiveness drops to zero with an increased amount of contamination with a middle virulence MDV strain. We predict that the larger the barn, and the more virulent the MDV strain is, the more virus is produced by the time the flock is slaughtered. With the low-to-moderate virulence of the strains studied here, the number of deaths due to MDV is very low compared to all-cause mortality regardless of the vaccination status of the birds. However, the cumulative MD incidence can reach 100% for unvaccinated cohorts, and 35% for vaccinated cohorts. These results suggest that death due to MDV is an insufficient metric to assess the prevalence of MDV broiler barns regardless of vaccine status, such that active surveillance is required to successfully assess the probability of MDV outbreaks, and to limit transmission of MDV between successive cohorts of broiler chickens

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

Impact of fast ions on density peaking in JET: fluid and gyrokinetic modeling

The effect of fast ions on turbulent particle transport, driven by ion temperature gradient (ITG)/ trapped electron mode turbulence, is studied. Two neutral beam injection (NBI) heated JET discharges in different regimes are analyzed at the radial position ρ$_{t}$=0.6, one of them an L-mode and the other one an H-mode discharge. Results obtained from the computationally efficient fluid model EDWM and the gyro-fluid model TGLF are compared to linear and nonlinear gyrokinetic GENE simulations as well as the experimentally obtained density peaking. In these models, the fast ions are treated as a dynamic species with a Maxwellian background distribution. The dependence of the zero particle flux density gradient (peaking factor) on fast ion density, temperature and corresponding gradients, is investigated. The simulations show that the inclusion of a fast ion species has a stabilizing influence on the ITG mode and reduces the peaking of the main ion and electron density profiles in the absence of sources. The models mostly reproduce the experimentally obtained density peaking for the L-mode discharge whereas the H-mode density peaking is significantly underpredicted, indicating the importance of the NBI particle source for the H-mode density profile

Current Research into Applications of Tomography for Fusion Diagnostics

Retrieving spatial distribution of plasma emissivity from line integrated measurements on tokamaks presents a challenging task due to ill-posedness of the tomography problem and limited number of the lines of sight. Modern methods of plasma tomography therefore implement a-priori information as well as constraints, in particular some form of penalisation of complexity. In this contribution, the current tomography methods under development (Tikhonov regularisation, Bayesian methods and neural networks) are briefly explained taking into account their potential for integration into the fusion reactor diagnostics. In particular, current development of the Minimum Fisher Regularisation method is exemplified with respect to real-time reconstruction capability, combination with spectral unfolding and other prospective tasks

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures