2,809 research outputs found
The preliminary design of bearings for the control system of a high-temperature lithium-cooled nuclear reactor
The design of bearings for the control system of a fast reactor concept is presented. The bearings are required to operate at temperatures up to 2200 F in one of two fluids, lithium or argon. Basic bearing types are the same regardless of the fluid. Crowned cylindrical journals were selected for radially loaded bearings and modified spherical bearings were selected for bearings under combined thrust and radial loads. Graphite and aluminum oxide are the materials selected for the argon atmosphere bearings while cermet compositions (carbides or nitrides bonded with refractory metals) were selected for the lithium lubricated bearings. Mounting of components is by shrink fit or by axial clamping utilizing differential thermal expansion
Current Induced Order Parameter Dynamics: Microscopic Theory Applied to Co/Cu/Co spin valves
Transport currents can alter alter order parameter dynamics and change steady
states in superconductors, in ferromagnets, and in hybrid systems. In this
article we present a scheme for fully microscopic evaluation of order parameter
dynamics that is intended for application to nanoscale systems. The approach
relies on time-dependent mean-field-theory, on an adiabatic approximation, and
on the use of non-equilibrium Greens function (NEGF) theory to calculate the
influence of a bias voltage across a system on its steady-state density matrix.
We apply this scheme to examine the spin-transfer torques which drive
magnetization dynamics in Co/Cu/Co spin-valve structures. Our microscopic
torques are peaked near Co/Cu interfaces, in agreement with most previous
pictures, but suprisingly act mainly on Co transition metal -orbitals rather
than on -orbitals as generally supposed.Comment: 9 pages, 5 figure
Ab-initio GMR and current-induced torques in Au/Cr multilayers
We report on an {\em ab-initio} study of giant magnetoresistance (GMR) and
current-induced-torques (CITs) in Cr/Au multilayers that is based on
non-equilibrium Green's functions and spin density functional theory. We find
substantial GMR due primarily to a spin-dependent resonance centered at the
Cr/Au interface and predict that the CITs are strong enough to switch the
antiferromagnetic order parameter at current-densities times smaller
than typical ferromagnetic metal circuit switching densities.Comment: 8 pages, 6 figure
New Challenges For Wind Shock Models: The Chandra Spectrum Of The Hot Star Delta Orionis
The Chandra spectrum of delta Ori A shows emission lines from hydrogen- and helium-like states of Si, Mg, Ne, and O, along with N VII Lyalpha and lines from ions in the range Fe XVII-Fe XXI In contrast to the broad lines seen in zeta Pup and zeta Ori (850 +/- 40 and 1000 +/- 240 km s(-1) half-width at half-maximum [HWHM], respectively), these lines are broadened to only 430 +/- 60 km s(-1) HWHM. This is much lower than the measured wind terminal velocity of 2000 km s(-1). The forbidden, intercombination, and resonance (fir) lines from He-like ions indicate that the majority of the X-ray line emission does not originate at the base of the wind, in agreement with the standard wind shock models for these objects. However, in that model the X-ray emission is distributed throughout an expanding, X-ray-absorbing wind, and it is therefore surprising that the emission lines appear relatively narrow, unshifted, and symmetric. We compare the observed line profiles to recent detailed models for X-ray line pro le generation in hot stars, but none of them offers a fully satisfactory explanation for the observed line profiles
Complex microwave conductivity of PrCeCuO thin films using a cavity perturbation method
We report a study of the microwave conductivity of electron-doped
PrCeCuO superconducting thin films using a
cavity perturbation technique. The relative frequency shifts obtained for the
samples placed at a maximum electric field location in the cavity are treated
using the high conductivity limit presented recently by Peligrad
Using two resonance modes, TE (16.5 GHz) and TE
(13 GHz) of the same cavity, only one adjustable parameter is needed
to link the frequency shifts of an empty cavity to the ones of a cavity loaded
with a perfect conductor. Moreover, by studying different sample
configurations, we can relate the substrate effects on the frequency shifts to
a scaling factor. These procedures allow us to extract the temperature
dependence of the complex penetration depth and the complex microwave
conductivity of two films with different quality. Our data confirm that all the
physical properties of the superconducting state are consistent with an order
parameter with lines of nodes. Moreover, we demonstrate the high sensitivity of
these properties on the quality of the films
An Extensive Collection of Stellar Wind X-ray Source Region Emission Line Parameters,Temperatures, Velocities, and Their Radial Distributions as Obtained from Chandra Observations of 17 OB Stars
Chandra high energy resolution observations have now been obtained from
numerous non-peculiar O and early B stars. The observed X-ray emission line
properties differ from pre-launch predictions, and the interpretations are
still problematic. We present a straightforward analysis of a broad collection
of OB stellar line profile data to search for morphological trends. X-ray line
emission parameters and the spatial distributions of derived quantities are
examined with respect to luminosity class. The X-ray source locations and their
corresponding temperatures are extracted by using the He-like f/i line ratios
and the H-like to He-like line ratios respectively. Our luminosity class study
reveals line widths increasing with luminosity. Although the majority of the OB
emission lines are found to be symmetric, with little central line
displacement, there is evidence for small, but finite, blue-ward line-shifts
that also increase with luminosity. The spatial X-ray temperature distributions
indicate that the highest temperatures occur near the star and steadily
decrease outward. This trend is most pronounced in the OB supergiants. For the
lower density wind stars, both high and low X-ray source temperatures exist
near the star. However, we find no evidence of any high temperature X-ray
emission in the outer wind regions for any OB star. Since the temperature
distributions are counter to basic shock model predictions, we call this the
"near-star high-ion problem" for OB stars. By invoking the traditional OB
stellar mass loss rates, we find a good correlation between the fir-inferred
radii and their associated X-ray continuum optical depth unity radii. We
conclude by presenting some possible explanations to the X-ray source problems
that have been revealed by this study.Comment: Published in 2007, ApJ, 668, 456. An Erratum scheduled for
publication in 2008, ApJ, 680, is included as an Appendix. The Erratum
corrects some tabulated data in 5 tables and 2 figure
- …