Coccidioidomycosis Complement Fixation Titer Trends in the Age of Antifungals.

Coccidioidomycosis is associated with a broad spectrum of illness severity, ranging from asymptomatic or self-limited pulmonary infection to life-threatening manifestations of disseminated disease. Serologic studies before the widespread availability of antifungals established current understanding of serologic kinetics and dynamics. Chart histories and complement fixation (CF) titer trends were analyzed for 434 antifungal-treated coccidioidomycosis patients, who were classified by three infectious disease physicians as having either pulmonary uncomplicated coccidioidomycosis (PUC) (n = 248), pulmonary chronic coccidioidomycosis (PCC) (n = 64), disseminated coccidioidomycosis (DC) not including meningitis (n = 86), or coccidioidal meningitis (CM) (n = 36). The median maximal CF titers were 1:4 for PUC patients, 1:24 for PCC patients, 1:128 for DC patients, and 1:32 for CM patients. Approximately 25.4% of PUC patients, 6.2% of PCC patients, 2.3% of DC patients, and 8.3% of CM patients did not develop detectable titers during the study period. Maximal titers developed a mean of 31 days (95% confidence interval [CI], 13 to 50 days) after initial serologic positivity, with no significant differences between groups. Serologic recurrence occurred in 9% of PUC patients, 36% of PCC patients, 50% of DC patients, and 52% of CM patients. Median titer improvement rates were 91 days/dilution for PUC patients, 112 days/dilution for PCC patients, 136 days/dilution for DC patients, and 146 days/dilution for CM patients. Receiver operating characteristic (ROC) analysis revealed that CF testing retains moderate classification value for disseminated infections (area under the curve [AUC], 0.82 [95% CI, 0.78 to 0.87]) and complicated infections (AUC, 0.82 [95% CI, 0.77 to 0.86]). A suitable cutoff value for complicated infections is ≥1:32. Findings update serologic parameters that are relevant for clinical assessment of coccidioidomycosis patients in the triazole era

Photodegradation modifies microplastic effects on soil properties and plant performance

1. Microplastics (MPs) in soil affect plant–soil systems depending on their shape and polymer type. However, previous research has not yet considered the effects of degraded plastics, which are the plastic materials actually present in the environment. 2. We selected eight MPs representing different shapes (fibres, films and foams) and polymer types, and exposed them to UV-C degradation. Each MP was mixed with soil at a concentration of 0.4% (w/w). The phytometer Daucus carota grew in each pot. At harvest, soil properties and plant biomass were measured. 3. Photodegradation altered MP physical and chemical properties, impacting plant–soil systems. MP degradation effects on plant and soil were observed with fibres and foams, but there were negligible effects with films. The latter could be explained by the polymer structure of films and manufacturer's additives, potentially delaying their degradation. 4. Degraded fibres increased soil respiration more than their non-degraded counterparts, as photodegradation increased the positive effects of fibres on soil water retention. The emergence of oxygenated groups during degradation may have increased the hydrophilicity of fibres, enhancing their ability to retain water. Degraded foams increased soil respiration, which could be related to the possible leaching of organic substances with lower partition coefficients, which may promote soil microbial activity. 5. In contrast, degraded foams decreased soil aggregation, likely as degradation produced larger holes increasing their permeability. Also, the increase in hydrophilic molecules could have decreased soil particle cohesiveness. Degraded fibres and foams increased shoot and root mass as a result of MP effects on soil properties. Photodegraded MPs affected root traits, which could be linked to MP effects on soil water status and plant coping strategies. 6. Synthesis and applications. Photodegradation can intensify the effects that microplastics (MPs) have on plant–soil systems, which would have frequently been underestimated had we only worked with pristine MPs. Plastic companies, agricultural practitioners and researchers should consider that plastics are being degraded as they enter the soil. Policies should promote practices to minimize MP accumulation in soils and ensure their proper disposal

Titanium addition influences antibacterial activity of bioactive glass coatings on metallic implants

© 2017 The Authors In an attempt to combat the possibility of bacterial infection and insufficient bone growth around metallic, surgical implants, bioactive glasses may be employed as coatings. In this work, silica-based and borate-based glass series were synthesized for this purpose and subsequently characterized in terms of antibacterial behavior, solubility and cytotoxicity. Borate-based glasses were found to exhibit significantly superior antibacterial properties and increased solubility compared to their silica-based counterparts, with BRT0 and BRT3 (borate-based glasses with 0 and 15 mol% of titanium dioxide incorporated, respectively) outperforming the remainder of the glasses, both borate and silicate based, in these respects. Atomic Absorption Spectroscopy confirmed the release of zinc ions (Zn2+), which has been linked to the antibacterial abilities of glasses SRT0, BRT0 and BRT3, with inhibition effectively achieved at concentrations lower than 0.7 ppm. In vitro cytotoxicity studies using MC3T3-E1 osteoblasts confirmed that cell proliferation was affected by all glasses in this study, with decreased proliferation attributed to a faster release of sodium ions over calcium ions in both glass series, factor known to slow cell proliferation in vitro

Label-free, live optical imaging of reprogrammed bipolar disorder patient-derived cells reveals a functional correlate of lithium responsiveness

Development of novel treatments and diagnostic tools for psychiatric illness has been hindered by the absence of cellular models of disease. With the advent of cellular reprogramming, it may be possible to recapitulate the disease biology of psychiatric disorders using patient skin cells transdifferentiated to neurons. However, efficiently identifying and characterizing relevant neuronal phenotypes in the absence of well-defined pathophysiology remains a challenge. In this study, we collected fibroblast samples from patients with bipolar 1 disorder, characterized by their lithium response (n=12), and healthy control subjects (n=6). We identified a cellular phenotype in reprogrammed neurons using a label-free imaging assay based on a nanostructured photonic crystal biosensor and found that an optical measure of cell adhesion was associated with clinical response to lithium treatment. This cellular phenotype may represent a useful biomarker to evaluate drug response and screen for novel therapeutics

The upgrade of GEO600

The German / British gravitational wave detector GEO 600 is in the process of being upgraded. The upgrading process of GEO 600, called GEO-HF, will concentrate on the improvement of the sensitivity for high frequency signals and the demonstration of advanced technologies. In the years 2009 to 2011 the detector will undergo a series of upgrade steps, which are described in this paper.Comment: 9 pages, Amaldi 8 conference contributio

Effect of TiO2 Doping on Degradation Rate, Microstructure and Strength of Borate Bioactive Glass Scaffolds

A titanium-containing borate glass series based on the system (52-X) B2O3–12CaO–6P2O5–14Na2O–16ZnO-XTiO2 with X varying from 0, 5 and 15 mol% of TiO2 incorporated, identified as BRT0, BRT1 and BRT3, respectively, were used in this study. Scaffolds (pore sizes, 165–230 μm and porosity, 53.51–69.51%) were prepared using a polymer foam replication technique. BRT3 scaffolds exhibited higher compressive strength (7.16 ± 0.22 MPa) when compared to BRT0 (6.02 ± 0.47 MPa) and BRT1 (5.65 ± 0.28 MPa) scaffolds with lower, or no, TiO2 content. The solubility of the scaffolds decreased as the TiO2 content increased up to 15 mol% when samples of each scaffold were immersed in DI water and the pH of all these extracts went up from 7.0 to 8.5 in 30 days. The cumulative ion release from the scaffolds showed significant difference with respect to TiO2 content; addition of 5 mol% TiO2 at the expense of borate (B2O3) decreased the ion release remarkably. Furthermore, it was found that for all three scaffolds, cumulative ion release increased with incubation time. The results indicate that the degradation rates and compressive strengths of borate bioactive glass scaffolds could be controlled by varying the amount of TiO2 incorporated, confirming their potential as scaffolds in TKA and rTKA

Supernova 2007bi as a pair-instability explosion

Stars with initial masses 10 M_{solar} < M_{initial} < 100 M_{solar} fuse progressively heavier elements in their centres, up to inert iron. The core then gravitationally collapses to a neutron star or a black hole, leading to an explosion -- an iron-core-collapse supernova (SN). In contrast, extremely massive stars (M_{initial} > 140 M_{solar}), if such exist, have oxygen cores which exceed M_{core} = 50 M_{solar}. There, high temperatures are reached at relatively low densities. Conversion of energetic, pressure-supporting photons into electron-positron pairs occurs prior to oxygen ignition, and leads to a violent contraction that triggers a catastrophic nuclear explosion. Tremendous energies (>~ 10^{52} erg) are released, completely unbinding the star in a pair-instability SN (PISN), with no compact remnant. Transitional objects with 100 M_{solar} < M_{initial} < 140 M_{solar}, which end up as iron-core-collapse supernovae following violent mass ejections, perhaps due to short instances of the pair instability, may have been identified. However, genuine PISNe, perhaps common in the early Universe, have not been observed to date. Here, we present our discovery of SN 2007bi, a luminous, slowly evolving supernova located within a dwarf galaxy (~1% the size of the Milky Way). We measure the exploding core mass to be likely ~100 M_{solar}, in which case theory unambiguously predicts a PISN outcome. We show that >3 M_{solar} of radioactive 56Ni were synthesized, and that our observations are well fit by PISN models. A PISN explosion in the local Universe indicates that nearby dwarf galaxies probably host extremely massive stars, above the apparent Galactic limit, perhaps resulting from star formation processes similar to those that created the first stars in the Universe.Comment: Accepted version of the paper appearing in Nature, 462, 624 (2009), including all supplementary informatio

The role of poly(methyl methacrylate) in management of bone loss and infection in revision total knee arthroplasty: A review

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). Poly(methyl methacrylate) (PMMA) is widely used in joint arthroplasty to secure an implant to the host bone. Complications including fracture, bone loss and infection might cause failure of total knee arthroplasty (TKA), resulting in the need for revision total knee arthroplasty (rTKA). The goals of this paper are: (1) to identify the most common complications, outside of sepsis, arising from the application of PMMA following rTKA, (2) to discuss the current applications and drawbacks of employing PMMA in managing bone loss, (3) to review the role of PMMA in addressing bone infection following complications in rTKA. Papers published between 1970 to 2018 have been considered through searching in Springer, Google Scholar, IEEE Xplore, Engineering village, PubMed and weblinks. This review considers the use of PMMA as both a bone void filler and as a spacer material in two-stage revision. To manage bone loss, PMMA is widely used to fill peripheral bone defects whose depth is less than 5 mm and covers less than 50% of the bone surface. Treatment of bone infections with PMMA is mainly for two-stage rTKA where antibiotic-loaded PMMA is inserted as a spacer. This review also shows that using antibiotic-loaded PMMA might cause complications such as toxicity to surrounding tissue, incomplete antibiotic agent release from the PMMA, roughness and bacterial colonization on the surface of PMMA. Although PMMA is the only commercial bone cement used in rTKA, there are concerns associated with using PMMA following rTKA. More research and clinical studies are needed to address these complications

Episodic photic zone euxinia in the northeastern Panthalassic Ocean during the end-Triassic extinction

Severe changes in ocean redox, nutrient cycling, and marine productivity accompanied most Phanerozoic mass extinctions. However, evidence for marine photic zone euxinia (PZE) as a globally important extinction mechanism for the end-Triassic extinction (ETE) is currently lacking. Fossil molecular (biomarker) and nitrogen isotopic records from a sedimentary sequence in western Canada provide the first conclusive evidence of PZE and disrupted biogeochemistry in neritic waters of the Panthalassic Ocean during the end Triassic. Increasing water-column stratification and deoxygenation across the ETE led to PZE in the Early Jurassic, paralleled by a perturbed nitrogen cycle and ecological turnovers among noncalcifying groups, including eukaryotic algae and prokaryotic plankton. If such conditions developed widely in the Panthalassic Ocean, PZE might have been a potent mechanism for the ETE.National Science Foundation (U.S.) (Grant EAR-1147402)Exobiology Program (U.S.) (Grants NNX09AM88G and NNA08CN84A)American Association of Petroleum Geologists (Grant-In-Aid)Mary-Hill and Bevan M. French Fund for Impact Geolog