54,154 research outputs found
150°C amorphous silicon thin-film transistor technology for polyimide substrates
We have developed a 150°C technology for amorphous silicon thin-film transistors (a-Si:H TFTs) on polyimide substrates deposited by plasma enhanced chemical vapor deposition. The silicon nitride gate dielectric and the a-Si:H channel material were tailored to provide the least leakage current and midgap defect density, respectively. In addition, we conducted experiments on the TFT structure and fabrication with the aim of obtaining high electron mobility. TFTs with back-channel etch and channel-passivated structures were fabricated on glass or 51 μm thick polyimide foil. The a-Si:H TFTs have an on/off current ratio of ∼10 7 and an electron mobility of ∼0.7 cm 2/V s
Axial compressor middle stage secondary flow study
This report describes an experimental investigation of the secondary flow within and aft of an axial compressor model with thick endwall boundary layers. The objective of the study was to obtain detailed aerodynamic and trace gas concentration traverse data aft of a well documented isolated rotor for the ultimate purpose of improving the design phases of compressor development based on an improved physical understanding of secondary flow. It was determined from the flow visualization, aerodynamic, and trace gas concentration results that the relative unloading of the midspan region of the airfoil inhibitied a fullspan separation at high loading preventing the massive radial displacement of the hub corner stall to the tip. Radial distribution of high and low total pressure fluid influenced the magnitude of the spanwise distribution of loss, such that, there was a general decreases in loss near the hub to the extent that for the least loaded case a negative loss (increase in total pressure) was observed. The ability to determine the spanwise distribution of blockage was demonstrated. Large blockage was present in the endwall regions due to the corner stall and tip leakage with little blockage in the core flow region. Hub blockage was found to increase rapidly with loading
Weakly nonlocal fluid mechanics - the Schrodinger equation
A weakly nonlocal extension of ideal fluid dynamics is derived from the
Second Law of thermodynamics. It is proved that in the reversible limit the
additional pressure term can be derived from a potential. The requirement of
the additivity of the specific entropy function determines the quantum
potential uniquely. The relation to other known derivations of Schr\"odinger
equation (stochastic, Fisher information, exact uncertainty) is clarified.Comment: major extension and revisio
Integration of remote sensing and surface geophysics in the detection of faults
Remote sensing was included in a comprehensive investigation of the use of geophysical techniques to aid in underground mine placement. The primary objective was to detect faults and slumping, features which, due to structural weakness and excess water, cause construction difficulties and safety hazards in mine construction. Preliminary geologic reconnaissance was performed on a potential site for an underground oil shale mine in the Piceance Creek Basin of Colorado. LANDSAT data, black and white aerial photography and 3 cm radar imagery were obtained. LANDSAT data were primarily used in optical imagery and digital tape forms, both of which were analyzed and enhanced by computer techniques. The aerial photography and radar data offered supplemental information. Surface linears in the test area were located and mapped principally from LANDSAT data. A specific, relatively wide, linear pointed directly toward the test site, but did not extend into it. Density slicing, ratioing, and edge enhancement of the LANDSAT data all indicated the existence of this linear. Radar imagery marginally confirmed the linear, while aerial photography did not confirm it
A History of Flips in Combinatorial Triangulations
Given two combinatorial triangulations, how many edge flips are necessary and
sufficient to convert one into the other? This question has occupied
researchers for over 75 years. We provide a comprehensive survey, including
full proofs, of the various attempts to answer it.Comment: Added a paragraph referencing earlier work in the vertex-labelled
setting that has implications for the unlabeled settin
Dynamics of mesoscopic precipitate lattices in phase separating alloys under external load
We investigate, via three-dimensional atomistic computer simulations, phase
separation in an alloy under external load. A regular two-dimensional array of
cylindrical precipitates, forming a mesoscopic precipitate lattice, evolves in
the case of applied tensile stress by the movement of mesoscopic lattice
defects. A striking similarity to ordinary crystals is found in the movement of
"meso-dislocations", but new mechanisms are also observed. Point defects such
as "meso-vacancies" or "meso-interstitials" are created or annihilated locally
by merging and splitting of precipitates. When the system is subjected to
compressive stress, we observe stacking faults in the mesoscopic
one-dimensional array of plate-like precipitates.Comment: 4 pages, 4 figures, REVTE
Results of special mechanical analyses of Luna 16 material
The studies carried out on the Luna 16 regolith have confirmed the data that were already published internationally. By means of activation analysis under irradiation in the reactor, activation analysis with a 14 MeV U-generator, and mass spectroscopy on samples of 10 or 20 mg, six main and 63 trace elements were quantitatively determined and compared with known data
- …